• 한국가스학회지
• /
• 제18권4호
• /
• pp.35-43
• /
• 2014

무기질 바닥마감재로 기존 위험물 저장시설의 유기질계 바닥재의 문제점을 극복할 수 있다. 하지만 기존 시공된 바닥재를 제거하는데 있어서 제거기와 바닥재의 물리적 충돌에 의해 불꽃이 발생될 수 있다. 이러한 위험물 저장시설에서의 폭발에 의한 화재가 발생할 수 있는 위험요소를 억제하도록 기존 바닥재를 제거하지 않고 시공할 수 있다. 또한, 상도제는 대전방지제가 함유되어 있어 위험물 저장시설에 있어서 바닥마감재 시공 후 발생될 수 있는 정전기에 의한 2차적 피해를 억제 할 수 있어 효과적이다. 따라서 본 연구에서 개발된 무기질 바닥마감재는 점검자의 안전 관리적 측면과 경제적 측면에 효과가 있을 것으로 기대된다.

• Composites Research
• /
• 제31권4호
• /
• pp.133-138
• /
• 2018

구조용 폼의 용도는 난연, 단열 기능이외에 구조적인 목적으로 공극부위를 충진시키는 용도로 사용되고 있다. 경량 소재 개발을 위해 CFRP와 구조용 폼이 이용되고 있으며, PUR, PIR, PVC, PET와 같은 대표적인 폼이 존재한다. 본 연구에서는 구조용 폼의 특성 중 강도 강화를 위한 목적으로 에폭시 폼을 개발하고자 하였다. 에폭시 조성 중 산무수물계 경화제는 기존의 폴리올과 반응을 하기 때문에 산무수물계 에폭시 수지에 발포제를 이용할 경우 폼이 형성되는지, 형성된다면, 압축특성과 포밍 형태를 관하는 연구를 진행하였다. 에폭시 폼을 형성시키기 위한 발포제의 종류에 따른 영향 및 발포재의 농도에 따라 변화되는 폼밍의 결과 차이를 분석하였으며, 산무수물계 수지의 조성차이에 따른 폼의 압축강도를 평가하였다. 궁극적으로 에폭시 폼을 최적의 발포제 선정으로 구조적 강도가 높은 폼을 형성시킬 수 있음을 확인하였으며, 기존의 구조용 폼 소재에 비해 높은 압축강도 및 비압축 강도를 가짐을 확인하였다.

• 보존과학회지
• /
• 제36권6호
• /
• pp.505-510
• /
• 2020

본 연구에서는 전통적인 방법으로 재현한 전통 명유, 전통 명유를 과학적으로 분석하여 친환경적인 방법으로 개발한 크린 명유, 그리고 명유의 원료이자 현재 목조문화재를 보수할 때 단청의 마감제로 사용되고 있는 생들기름의 방미효력을 평가하였다. 평가 결과, 생들기름은 방미효력이 거의 없는 것으로 나타난 반면에, 두 종류의 명유는 모두 높은 성능의 방미효력을 보였다. 하지만, 명유를 천연용제인 테르펜유에 희석하여 사용하면 균주에 노출된 지 4주 만에 방미효력이 현저히 감소하는 것을 확인 할 수 있었다. 목재에 처리된 약제의 함량이 명유의 방미효력에 영향을 주는 것으로 판단된다. 즉, 목조건축물을 축조함에 있어서 명유가 들기름보다 곰팡이 발생을 억제하기 위한 마감제로 더 적합하며, 야외 환경에서의 곰팡이 성장 억제를 저해 할 수 있는 최적의 처리량 및 처리 방법에 대한 추가 연구를 통하여 명유의 적용 가능성을 높힐 수 있을 것으로 생각한다.

• 한국염색가공학회지
• /
• 제13권3호
• /
• pp.188-196
• /
• 2001

1, 1-diamino-3, 3, 5, 5-tetrachlorocyclotriphosphazene, 1, 1-diami-no3, 3, 5, 5-tetra-(p-bromophenoxy)cyclotriphosphazene, and 1, 1-diamino-3, 3, 5, 5-tetra-(p-chlorophenoxy) cyclotri-phosphazene(ACPP) was prepared from hexachlorocyclotriphosphazene and used for the curing agent of bisphenol A type epoxy resin and phenol novolak. The resistance to chemicals and water of the cured epoxy resins were examined by DMTA and compared with those of the epoxy rosins cured with phosphazene derivatives and 4, 4'-diaminodiphenylmethane. The effect of the curing agent on resistance to chemicals and water of the cured epoxy resins were investigated. The epoxy resins cured with 1, 1-diamino-3, 3, 5, 5-tetrachlorocyclotriphosphazene and 1, 1- diamino-3, 3, 5, 5-tetra- (p-bromophenoxy)cyclotriphosphazene showed superior resistance to chemicals and water to those of 1, 1-diamino-3, 3, 5, 5-tetra- (p-chlorophenoxy)cyclotriphosphazene and 4, 4'-diaminodiphenylmethane. It is an effective curing agent for epoxy resins to enhance the resistance to chemicals, water and tome proofing.

• 한국염색가공학회지
• /
• 제17권4호
• /
• pp.1-6
• /
• 2005

We studied the degree of variety of indigo for the electrochemical redox reaction in addition of reducing agent and the electrokinetic parameters. The electrokinetic parameters such asthe number of electron and the exchange rate constant were obtained by cyclic voltammetry. With increasing scan rate, the reduction currents of indigo were increased and the reduction potentials were shifted to the negative direction. As the results, the reduction processes of the indigo were proceeding to totally irreversible and diffusion controlled reaction. Also, exchange rate constant ($k^0$) and diffusion coefficient ($D_0$) of indigo were decreased by increasing concentration of reducing agent. We found that the less concentration, the more easily diffused and electron transferred and the product was more stable.

• 한국염색가공학회지
• /
• 제20권5호
• /
• pp.1-6
• /
• 2008

3-(Hydroxyphenyl phosphinyl) propanoic acid (HPPA) has been one of the most commonly used durable flame retardant agents for polyethylene terephthalate (PET) for many years. We intended to explore the application of HPPA to cellulose fabrics as formaldehyde-free phosphorus based flame retardants (FRs) through green chemistry process. The flame retardancy of the flame-retardant treated cellulose fabrics were characterized by using inductively coupled plasma spectroscopy (ICP) and limiting oxygen index (LOI). Structural changes of the treated cellulose fabrics were carried out by thermogravimetric analysis (TGA) and Fourier transform infrared (FT-IR) spectroscopy. To enhance the flame retardancy of HPPA treated cellulose fibers, glycerol polyglycidyl ether (GPE), a crosslinking agent was employed. Both HPPA and GPE treated cotton fabric imparted an LOI value over 26.

• 한국염색가공학회지
• /
• 제20권1호
• /
• pp.16-21
• /
• 2008

In this study the effects of swelling and fixing agent for the cotton side of polyester/cotton blended fabrics and the thermosol temperature on the dyeing properties and fastness. were investigated, when the polyester/cotton blended fabrics were dyed with a disperse dye which was able to dye both side of fiber by one bath one step thermosol process. The obtained results are as follows; The dye adsorption decreased with the increase of cotton blend ratio in polyester/cotton blended fabrics, when the ratio of swelling and fixing agent for cotton side was constant. As the thermosol temperature increased up to $210^{\circ}C$, the dye adsorption were increased, but that effect was less significant when the cotton blend ratio was higher.

• 한국염색가공학회지
• /
• 제24권1호
• /
• pp.1-7
• /
• 2012

Dyeing and fastness characteristics of 100% meta-aramid fiber were investigated with cationic dyes and swelling agents under various dyeing conditions such as dyeing temperature and pH of dye bath. Dye exhaustion started at around $80^{\circ}C$ and settled down at $130^{\circ}C$. Among swelling agents used, N-methyl formanilide showed comparatively higher K/S values comparing to 1-phenoxypropan-2-ol. Under weak acidic conditions in the range pH 5 to 7, the exhaustion of cationic dyes could be enhanced leading to higher adsorption and stability of colorimetric property. Wash and rubbing fastness were generally good but low light fastness found can be attributable to the poor photo-stability of the cationic dyes.

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.68-73
• /
• 1997

Urea/formaldehyde(UF) and melamine/formaldehyde(MF) microcapsules containing perfume and 2,4,4'-trichlroro-2-hydroxydiphenyl ether(DP) were prepared by the in-situ polymerization using urea and formaldehyde. Effects of dispersing agent, accelerating agent, formaldehyde, agitation speed on the mean diameter of microcapsules were investigated. The diameter of microcapsule was decreased with increasing dispersing agent concentration. A slight increase in the diameter was observed when the concentration of film forming material was increased. The diameter of microcapsule was decreased with increasing agitation speed up to 8,000rpm. The mean diameters of UF microcapsule prepared at 8,000rpm are about 3$\mu$m. A slight decrease in the diameter was observed when the concentration of resorcinol was increased.

• 한국염색가공학회지
• /
• 제19권5호
• /
• pp.8-16
• /
• 2007

The dye-resist effect of reactive dye-resist agents in reactive dyeing of silk was investigated. The dichlorotriazine-based dye-resists achieved a higher effectiveness than others since they make a charge barrier of diffusion in the silk fiber periphery due to high reactivity of dichlorotriazine group. Similarly, in the case of hetero-multifunctional dye-resist agent, the dye-resist agent containing both a dichlorotriazine and an ${\alpha}$-bromoacrylamide reactive groups achieved better resist effectiveness than those containing both a monochlorotriazine and an ${\alpha}$-bromoacrylamide groups. Also, their resist effectiveness was improved by increasing the number of sulfonate groups in the dye-resist agents and the number of reactive groups in the reactive dyes applied to them.