• Journal of Distribution Research
• /
• v.16 no.5
• /
• pp.171-192
• /
• 2011

This paper focuses on the retail industry of industrial share of the GDP, productivity of distribution industry and input-out analysis between Korea and Japan, also results are summarized as follows. First, the share of GDP in agriculture, forestry and fisheries of the both countries is falling. That of manufacture increases in South Korea, while Japan is falling. While distribution industry shows vice versa. Employed population by industry is falling both countries also. The relative labor productivity shows that agriculture, forestry and fisheries, retail industry needs more labor, while manufacture has been met for both countries. Second, compare to Japan, the retail industry of Korea has been increased since 1990. Likewise, overall productivity of distribution industry in Korea has been increased while almost that of Japan has declined. Third, production inducement effects of Japan are greater than that of Korea. On the other hand, import inducement effects show vice versa. Fourth, as shown from the final demand of distribution industry and the rate of dependence on production inducement, we can see that the “increase in stocks” increases while gross government fixed capital formation shows vice versa. Korea's private consumption expenditure increases while Japan shows versa. South Korea's government consumption expenditure and exports are rising, on the other hand, that of Japan is declining. Fifth, the rate of dependence on distribution industry and import inducement shows the same tendency from both countries. As we can see from the private consumption expenditure, government consumption expenditure, gross government fixed capital formation, gross private fixed capital formation, increase in stocks, the rate of dependence on import inducement is more effective than the rate of dependence on production inducement. While the exports are comparatively ineffective. Sixth, the degrees of influence of retail industry are similar between Korea and Japan, while sensitivity of the Korean industry has been weakened. In this sense, strong policies are needed to boost the industry. Seventh, the investments in the retail industry of Korea showed the public-led trend, while Japan showed private sector-led investment trend. The investment trend of Korea's retail industry will be switched into private sector-led investment step by step in the future. This finding will be an important clue to set the policy direction of Korea distribution industry. Finally, both Korea and Japan are still in need of employment in retail industry. Not addressed in this paper, such as value-added-induced effects, employment inducement effect, will be remaining challenges in the following paper.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.557-566
• /
• 2005

In preparation of steamed foam-cakes, effects of whipping time, amount of wheat flour, and amounts of emulsifier on physical properties of the steamed foam cakes were investigated using RSM (response surface methodology). The three independent variables selected for the RSM experiment were whipping time $(X_1)$, amount of wheat flour $(X_2)$, and amounts of wheat flour $(X_2)$, and concentration of emulsifier $(X_3)$ were set for single-stage mixing, respectively. A rotatable central composite design was used for treatment arrangement. The responses from the product for loaf volume, color values and textural properties were analysed. In the analysis of variance for the foam cakes prepared by single-stage method, significant interactions were observed between independent variables (experimental factors) and physical property like loaf volume (p<0.05); textural properties like hardness, gumminess, and chewiness (p<0.05). Among independent variables, concentration of emulsifier had the most effects on physical properties while whipping time. The ordinary points in surface response showed maximal points with physical property like colorimetric b value while other properties revealed saddle points. The 3-dimensional response surface graphs of the predicted regression models displayed decreasing loaf volumes with increasing whipping times and emulsifier concentrations beyond optimum levels. The optimum conditions for best loaf volume and textural property (hardness, gummimess and chewiness) of the products selected by extracting intersectional areas of the contour maps that commonly overlapped all characteristics were; $11\~13$ min whipping time, $470\~486\;g$ amount of wheat flour, and $19\~20\;g$ emulsifier concentration, in case of single-stage method. The median values extracted from the RSM experimental results for optimum manufacturing conditions for single-stage method, i.e., 12 min whipping time, 478 g amount of wheat flour, and 20 g emulsifier concentration were empirically proven to fit the predicted levels of physical properties from the final foam cakes.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.172-183
• /
• 2017

Germinated brown rice (GBR) has received considerable attention over the last decade as a means of enhancing the nutritional value and health-promoting functions of rice. The effect of germination on the physicochemical and textural properties of brown rice (BR) was investigated in different rice varieties (Samkwang, Misomi, Chindeul, and Hyeonpum). Cooking properties, such as water absorption, expanded volume, and soluble solids were significantly increased by germination in all rice varieties. Textural properties (hardness, toughness, adhesiveness, and stickiness) of cooked samples were determined using a texture analyzer. Hardness and toughness were decreased by germination, whereas stickiness and adhesiveness increased significantly. These results revealed that germination leads to improvements in the cooking and eating properties of BR. In Rapid Visco Analyzer (RVA), significant reductions were observed for peak viscosity, break down, set back, and final viscosity after germination. Although the amylose content of Misomi was slightly decreased by germination, that of other varieties increased significantly. Germination induced no noticeable change in the average chain length of amylopectin in Misomi, Chindeul and Hyeonpum, but led to a significant increase in Samkwang.

• Journal of Korean Home Economics Education Association
• /
• v.25 no.4
• /
• pp.63-77
• /
• 2013

The purpose of this study is to develop the home economics-relevant program on Korean traditional culture for adolescents from multicultural families for them for experience it directly, set up ego-identity and improve social adaptability. Further, we checked the effectiveness and efficiency of the developed program. First we developed the program composed of a total of 12 sessions based on experiencing Korean culture. It consists of largely 5 madang(parts) centered on themes such as Eowool madang, Hangeul madang, Play madang, Cooking madang and hostory madang. We ran the developed program for 3 months targeting a total of 18 persons composed of the adolescents from multicultural families and their mothers residing in S city of eastern area of Jeonnam province. We measured the participants' ego-identity, social adaptibility and participation satisfaction to examine the effectiveness of the program. The results of pre-test, post-test and satisfaction which are evaluation instruments used in this program are as follows. First, it appeared that the self-identity of the adolescent of multicultural families inceased by 0.30 from average score of 3.03 before the participation in the program to 3.33 after the participation. Social adaptability increased by 0.30 from average 3.11 before the participation to 3.41 after the participation. Second, in the program participation satisfaction, it appeared that first the middle satisfaction marked average 3.30 which exceeded median value at 3.00, meaning a little high satisfaction, whereas the final satisfaction had an averagescore of 4.03, which means a big satisfaction concerning the program participation. The results indicated that the home economics-relevant program was effective in improving the ego-identity and social adaptability of adolescents from multicultural families and supporting a role of as a member of Korean family.

• Journal of Science and Technology Studies
• /
• v.8 no.1
• /
• pp.97-129
• /
• 2008

We are living in the time of high probability of technological risk due to increased rate of technology development and diffusion of new technologies. Resolving uncertainties, the basic attribution of risk, by accumulating knowledge over the risk factors of certain technology is critical to management of technological risk. In many cases of technological risks, high uncertainty of knowledge is commonly mentioned reason for public controversies on risk management. However, the type of technological risk with low social agreement and low uncertainty of knowledge, the main reason for public controversy is absence of social agreement. Public debates on the risks of mobile phones electromagnetic fields(EMF) to human health comes under this category. The knowledge uncertainty on human health effect of mobile phones EMF has been lowered increasingly by accumulating enormous volume of knowledge though scientists have not reached a final conclusion whether it pose a risk to the physical and mental health of the general population or not. In contrast with civil organizations calling for precautionary approach based regulation, the mobile phone industry is cling to the position of no-regulation-needed by arguing no clear evidence to prove health risks of mobile phone EMF has found. In Korea, government set exposure standards based on a measurement called the 'specific absorption rate'(SAR) and require the mobile phone industry to open SAR information to the public by their own decision. From the view of pro-regulation side based on precautionary approach, technology risk managament of mobile phones EMF in Korea is highly limited and formalized one with limited measuring of SAR on head part only and problematic self-regulated opening of information about SAR to the public. As far as the government keeps having priority on protecting interest of mobile phone industry over precautionary regulation of mobile phones EMF, the disagreement between civil organizations and the government will not resolved. The risk of mobile phones EMF to human health have high probability of being underestimated in the rate and damage of risk than objectively estimated ones due to familiarity of mobile phone technology. And this can be the cause of destructive social dispute or devastating disaster. To prevent such disastrous results, technology risk management, which integrating the goals of safety with economic growth in public policy and designing and promoting risk communication, is required.

• Journal of Arbitration Studies
• /
• v.14 no.1
• /
• pp.273-314
• /
• 2004

There is a belief in the construction industry that the traditional court system may not be an ideal forum to effectively and efficiently resolve construction disputes due to the protracted proceedings and the three tier appeal system resulting in a long delay in the final and conclusive settlement of the dispute, relatively high costs involved, the lack of requisite knowledge and experience in the relevant industry, etc. Hence, they assert that certain alternative dispute resolution ('ADR') methods, such as mediation, conciliation, arbitration or a new system for dispute settlement in the form of any combination thereof should be developed and employed for construction disputes so as to resolve them more promptly and efficiently to the satisfaction of all the disputants concerned. This paper discusses certain merits of such assertions and the need for additional considerations for effective resolution of the construction disputes in light of the complexity of the case, importance of expert witnesses, parties' relationship and non-level playing field of the construction industry and so on. At the same time, however, given the inherent nature of disputes rendering the parties involved in an adversarial position, it would rather be difficult, if not practically impossible, to satisfy all the parties concerned in the dispute. Accordingly, in this study, it is also purported to address the demerits of such assertions by studying the situation from a more balanced perspective, in particular, in relation to the operation of such ADRs. In fact, most of such ADRs as stipulated by special acts, such as the Construction Industry Basic Act of Korea, in the form of mediation or conciliation, have failed to get support from the industry, and as a result, such ADRs are seldom used in practice. Tn contrast, the court system has been greatly improved by implementing a new concentrated review system and establishing several tribunals designed to specialize in the review and resolution of specific types of disputes, including the construction disputes. These improvements of the court system have been warmly received by the industry. Arbitration is another forum for settlement of construction disputes, which has grown and is expected to grow as the most effective ADR with the support from the construction industry. In this regard, the Korean Commercial Arbitration Board ('KCAB') has established a set of internal rules end procedures in operation to efficiently handle construction disputes. Considering the foregoing, this paper addresses the most important elements of the arbitration, i.e., arbitration agreement and arbitral award, primarily focusing on the domestic arbitrations before the KCAB. However, since this parer is prepared for presentation at the construction disputes seminar for the public audience, it is not intended for academic purposes, nor does it delve into any specific acadcmic issues. Likewise, although this paper addresses certain controversial issues by way of introduction, it mainly purports to facilitate the understanding of the general public, including the prospective arbitrators on the KCAB roster without the relevant legal education and background, concerning the importance of the integrity of the arbitration agreement and the arbitral award. In sum, what is purported in this study is simply to note that there are still many outstanding issues with mediation, conciliation and arbitration, as a matter of system, institutional operation or otherwise, for further study and consideration so as to enhance them as effective means for settlement of construction disputes, in replacement of or in conjunction with the court proceeding. For this purpose, it is essential for all the relevant parties, including lawyers, engineers, owners, contractors and social activists aiming to protect consumers' and subcontractors' interests, to conduct joint efforts to study the complicated nature of construction works and to develop effective means for examination and handling of the disputes of a technical nature, including the accumulation of the relevant industrial data. Based on the foregoing, the parties may be in a better position to select the appropriate dispute resolution mechanism, a court proceeding or in its stead, an effective ADR, considering the relevant factors of the subject construction works or the contract structure, such as the bargaining position of the parties, their financial status, confidentiality requirements, technical or commercial complexity of the case at hand, urgency for settlements, etc.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.9
• /
• pp.441-450
• /
• 2016

In this study, we investigate the effect of the level of cognitive affordance which explains an explicit interaction method on the interest of viewers. Viewer's recognition of the interaction method is associated with cognitive affordance as a matter of visual-perceptual exposure of the input device and viewer's cognition of it. The final goal of the research on affordance is to enhance the audience participation rather than the smooth interation. Many interactive media artworks have been designed with hiding the explicit explanation to the artwork due to worry that the explicit explanation may also hinder the induction of impressions leading the viewer to an aesthetic experience and the retainment of interest. In this context, we set up two hypotheses for study on cognitive affordance. First, the more explicit the explanation of interaction method is, the higher the viewer' understanding of interaction method is. Second, the more explicit the explanation of interaction method is, the lower the interest of the viewer is. An interactive media art work was manufactured with three versions which vary in the degree of visual-perceptual information suggestion and we analyzed the participation and interest level of audience in each version. As a result of the experiments, the version with high explicitness of interaction was found to have long time spent on watching and high participation and interest of viewers. On the contrary, the version with an unexplicit interaction method was found to have low interest and satisfaction of viewers. Therefore, regarding usability, the hypothesis that a more explicit explanation of interaction would lower the curiosity and interest in exploration of the viewer was dismissed. It was confirmed that improvement of cognitive affordance raised the interaction of the work of art and interest of the viewer in the proposed interactive content. This study implies that interactive media art work should be designed in view of that the interaction and interest of audience can be lowered when cognitive affordance is low.

• Journal of dental hygiene science
• /
• v.14 no.3
• /
• pp.319-324
• /
• 2014

The aim of this study was to evaluate influences of titanium dioxide ($TiO_2$) concentrations and irradiation times on growth of Streptococcus mutans when irradiated by visible light (405 nm wavelength) and by ultraviolet light (254 nm wavelength). To find the optimal antibacterial concentration of $TiO_2$, 0.01, 0.1, 1.0, and 10.0 mg/ml $TiO_2$ suspension was prepared with sterilized distilled water. S. mutans cultured media was added to $TiO_2$ solution to set the final cell count to $10^4CFU/ml$. The photocatalytic reaction was induced by irradiating 254 nm and 405 nm lights for 10 minutes. To compare the bactericidal activities according to irradiation times, all photocatalytic reaction was carried out with 0.1 mg/ml $TiO_2$ for 0, 10, 20, 30, and 40 minutes with both lights. After the photocatalytic reaction, $100{\mu}m$ of the reaction mixture was immediately plated on brain heart infusion agar. These plates were placed at 5% $CO_2$, $37^{\circ}C$, for 24 hours and the bacterial colonies were counted. All experiments were performed in quintuplicate. One-way ANOVA was used to determine whether there were any significant differences between the $TiO_2$ concentrations or the irradiation times. The most effective concentration of $TiO_2$ for its photocatalytic bactericidal effect on S. mutans was 0.1 mg/ml when irradiated with 254 nm and 405 nm lights. The longer the irradiation time, the bigger the bactericidal effect for both wavelengths. Over 99% of bacteria in the inoculum were killed after irradiation with 254 nm for 20 minutes and with 405 nm for 40 minutes. In conclusion, a photocatalytic reaction of $TiO_2$ induced by visible light of 405 nm constitutes the bactericidal effect on S. mutans.

• Management & Information Systems Review
• /
• v.36 no.5
• /
• pp.27-44
• /
• 2017

The purpose of this study was to empirically verify the effect of social entrepreneurship on market orientation. total of 500 questionnaires were distributed to workers in social enterprise and preliminary social enterprise. 202 questionnaires were used for final validation of research model, The hypotheses set in this study were validated through SPSS18.0 and LISREL8.3 based on the research model. The results showed that all hypotheses were accepted, except for 5 hypotheses(Hypothesis 1-1, Hypothesis 1-2, Hypothesis 1-3, Hypothesis 1-6, Hypothesis 1-9). First, we examined the effect that empathy might have on market orientation in connection with social entrepreneurship. The results suggested that empathy did not have a statistically significant effect on customer-orientation, inter-department cooperation and coordination, and competitor orientation. Second, we examined the effect that innovativeness might have on market orientation in connection with social entrepreneurship. The results showed that innovativeness had a positive(+) effect on customer-orientation and inter-department cooperation and coordination but did not have a statistically significant effect on competitor-orientation. Third, we examined the effect that risk-taking might have on market orientation in connection with social entrepreneurship. The results implied that risk-taking had a positive(+) effect on customer-orientation and inter-department cooperation and coordination but did not have a statistically significant effect on competitor-orientation. Finally, the relationship among market orientation variables was like this: The inter-department cooperation and coordination had a positive(+) effect on both customer-orientation and competitor-orientation. The results of this study are expected to provide a useful basis for overall understanding about the effect of social entrepreneurship on market orientation and present important theoretical and practical implications.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.1
• /
• pp.27-35
• /
• 2014

The headspace solid-phase microextraction (HS-SPME) followed by gas chromatography/mass spectrometry procedure has been developed for the simultaneous determination of petroleum aromatic hydrocarbons such as benzene, toluene, ethylbenzene and xylene isomers (BTEX) and polycyclic aromatic hydrocarbons (PAHs) in seawater. The advantages of SPME compared to traditional methods of sample preparation are ease of operation, reuse of fiber, portable system, minimal contamination and loss of the sample during transport and storage. SPME fiber, extraction time, temperature, stirring speed, and GC desorption time were key extraction parameters considered in this study. Among three kinds of SPME fibers, i.e., PDMS ($100{\mu}m$), CAR/PDMS ($75{\mu}m$), and PDMS/DVB ($65{\mu}m$), a $65{\mu}m$ PDMS/DVB fiber showed the most optimal extraction efficiencies covering molecular weight ranging from 78 to 202. Other extraction parameters were set up using $65{\mu}m$ PDMS/DVB. The final optimized extraction conditions were extraction time (60 min), extraction temperature (50), stirring speed (750 rpm) and GC desorption time (3 min). When applied to artificially contaminated seawater like water accommodated fraction, our optimized HS-SPME-GC/MS showed comparable performances with other conventional method. The proposed protocol can be an attractive alternative to analysis of BTEX and PAHs in seawater.