• 설비공학논문집
• /
• 제12권5호
• /
• pp.494-501
• /
• 2000

Effectiveness of a 3-pass plate finned-tube heat exchanger is calculated using heat exchangelet method by changing the shape of fin and the arrangement of tubes. The alternative refrigerant R134a is taken in this study. Conduction between neighboring tubes along the fin is taken into account in addition to convection between the fin and the surrounding air. Governing equations are obtained by using energy balance in a small control volume containing a tube and fins. They are numerically solved following the tube. Effect of tube-to-tube conduction is investigated in single-phase and two-phase flows with various fin shapes and arrangements of tubes. Improvement of effectiveness by fin perforation is studied too. The results shows that perforating fins, increasing the number of tubes, and increasing the distance between neighboring tubes at the same fin area enhance the effectiveness.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.82-85
• /
• 2006

측면 기울기가 변하는 사다리꼴 핀이 일차원 해석적 방법에 의하여 최적으로 설계된다. 각기 다른 네 경우의 대류특성계수에 대하여 핀 끝 길이를 따른 열손실의 변화경향이 보여 진다. 최적의 열손실은 다소 임의적으로 최대열손실의 92%로 선택된다. 이러한 최적의 열손실이 발생할 때의 최적의 핀 길이 대 대류특성계수의 변화가 나타내진다. 최적의 유용성과 특정한 경우의 유용성이 핀 형상 계수의 함수로 보여 진다.

• 설비공학논문집
• /
• 제16권8호
• /
• pp.683-690
• /
• 2004

A modified rectangular fin is analyzed by two-dimensional analytic method and finite difference method. Relative error of heat loss from the modified rectangular fin between analytic method and finite difference method is presented. Comparisons of fin effectiveness and heat loss between a modified rectangular fin and a plane rectangular fin are made as a function of the non-dimensional fin length and wing height for different positions of wings by using analytic method. The ratio of the incremental rate of heat loss to that of the area of a modified rectangular fin is shown as a function of the wing height. One of the results shows that performance of a modified fin is more improved as the wing approaches the fin root.

• 설비공학논문집
• /
• 제20권7호
• /
• pp.455-461
• /
• 2008

A reversed trapezoidal fin with variable fin base thickness is optimized using a two-dimensional analytical method. For the fin base boundary condition, instead of a constant temperature, heat transfer from the inside fluid to the fin base is considered. Heat loss from the fin tip is not ignored. The maximum heat loss, corresponding optimum fin effectiveness, fin length and base height are presented as a function of the fin base thickness, shape factor and volume.

• International Journal of Automotive Technology
• /
• 제8권6호
• /
• pp.705-711
• /
• 2007

A rectangular fin with a fluid in the inside wall is analyzed and optimized using a two-dimensional analytical method. The influence of the fluid convection characteristic number in the inside wall and the fin base thickness on the fin base temperature is listed. For the fixed fin volumes, the maximum heat loss and the corresponding optimum fin effectiveness and dimensions as a function of the fin base thickness, convection characteristic numbers ratio, convection characteristic number over the fin, fluid convection characteristic number in the inside wall, and the fin volume are represented. One of the results shows that both the optimum heat loss and the corresponding fin effectiveness increase as the fin base thickness decreases.

• 신재생에너지
• /
• 제2권1호
• /
• pp.46-55
• /
• 2006

The performance enhancement of heat exchanger in the drying system using solar collector with evacuated tubes is analyzed. First, for this analysis, the heat loss from a reversed trapezoidal fin attached at the pipe is calculated as a function of convection characteristic number ratio, fin base length and fin tip length. Also, the optimum heat loss and fin tip length of the fin under certain conditions are presented. The overall surface effectiveness of the cylinder with reversed trapezoidal fins in the heat exchanger are shown as a function of half fin base height, fin lateral slope and fin tip length.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제6권2호
• /
• pp.109-120
• /
• 2002

The dimensionless heat loss from a modified asymmetric rectangular fin is investigated as a function of the fin top and tip Biot numbers using the two-dimensional separation of variables method. A rectangular fin is modified by attaching the wing on the top side of the fin. Fin effectiveness and efficiency with the variation of the location of the wing and the width of the wing are presented. The relationship between top surface Biot number and bottom surface Biot number as well as the relationship between the dimensionless wing height and the location of the wing for equal amount of heat loss is also discussed.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.84-91
• /
• 2001

Comparison between performance of a plate fin and that of a modified plate fin is investigated as a function of the position, the non-dimensional width and height of wings as well as the non-dimensional fin length using a two-dimensional separation of variables method. The ratio of the incremental rate of heat loss to that of the area of a modified plate fin is also presented as a function of the height of wings. The modified plate fin is made by attaching the wings to upper and lower sides of a plate fin. One of the results shows that performance of a modified plate fin is more improved as the wings approach left (higher) thermal reservoir.

• 산업기술연구
• /
• 제16권
• /
• pp.97-104
• /
• 1996

A comparison of the fin effectiveness, thermal resistance, and fin efficiency between the symmetric triangular fin and the symmetric trapezoidal fin which has various slopes of the fin side is made. Also the relation between Biot number and the non-dimensional fin length for equal amount of heat loss from these fins is shown. For these analyses, a forced analytic method is used. In particular, the equation for the heat loss is used simultaneously for both the symmetric triangular fin and the symmetric trapezoidal fins by just adjusting the value of the slope factor. The value of Biot number varies from 0.01 to 1.0 and the non-dimensional fin length varies from 0.01 to 10. For simplicity, the root temperature and fin's surrounding convection coefficients are assumed constant and the condition is assumed to be steady state.

• 한국추진공학회지
• /
• 제3권3호
• /
• pp.16-24
• /
• 1999

다른 윗면 경사각을 가진 사다리꼴 휜 들에 대한 성능 해석이 3차원 해석적 방법에 의하여 조사된다. 단지 경사요소 값을 조정함으로써 한가지 식으로 다른 경사각을 가진 사다리꼴 횐 들을 해석할 수 있는 것이 보여진다. 나머지 변수들을 임의로 고정하였을 때 휜들의 성능들이 무차원 휜 길이, 휜 폭, Biot 수 그리고 경사요소에 대한 함수로 보여진다. 하나의 결과로서 Biot 수가 0.1 이하의 경우에서는 Biot 수, 무차원 휜 폭 그리고 경사요소가 감소함에 따라, 반면에 무차원 길이가 증가함에 따라 휜 유용도는 증가 하나 더 큰 Biot 수에서는(즉, Bi=0.3) 유용도에 대한 횐 형상의 효과의 변화 경향은 다소간 불규칙적이다.