• Title/Summary/Keyword: filter pack method

Search Result 16, Processing Time 0.029 seconds

Adaptive State-of-Charge Estimation Method for an Aeronautical Lithium-ion Battery Pack Based on a Reduced Particle-unscented Kalman Filter

  • Wang, Shun-Li;Yu, Chun-Mei;Fernandez, Carlos;Chen, Ming-Jie;Li, Gui-Lin;Liu, Xiao-Han
    • Journal of Power Electronics
    • /
    • v.18 no.4
    • /
    • pp.1127-1139
    • /
    • 2018
  • A reduced particle-unscented Kalman filter estimation method, along with a splice-equivalent circuit model, is proposed for the state-of-charge estimation of an aeronautical lithium-ion battery pack. The linearization treatment is not required in this method and only a few sigma data points are used, which reduce the computational requirement of state-of-charge estimation. This method also improves the estimation covariance properties by introducing the equilibrium parameter state of balance for the aeronautical lithium-ion battery pack. In addition, the estimation performance is validated by the experimental results. The proposed state-of-charge estimation method exhibits a root-mean-square error value of 1.42% and a mean error value of 4.96%. This method is insensitive to the parameter variation of the splice-equivalent circuit model, and thus, it plays an important role in the popularization and application of the aeronautical lithium-ion battery pack.

Study of the Migration Rate of L-menthol into Cigarette Pack and Delivery Rate to Cigarette Smoke (포갑 내에서 L-menthol의 이동과 연중 이행 효과에 관한 연구)

  • 김병구;김시몽;양범호;제병권;이규서
    • Journal of the Korean Society of Tobacco Science
    • /
    • v.24 no.1
    • /
    • pp.46-52
    • /
    • 2002
  • This study was carried out to investigate the transfer rate of I-menthol constituent into cigarette case and delivery rate to cigarette smoke. Test sample was used a light-type standard brand cigarette made in Korea. I-Menthol contents was measured according to A.O.A.C(1990) method by G.C and smoking conditions was a puff volume of 35$m\ell$ and 2.0s duration, taken once per minute to filter tipping paper plus 3mmwith 20 cigarettes. Migration rate of menthol into cigarette case had an interrelation with triacetin contents into filter and 6% triacetin level was most suitable. I-Menthol transferred to filter part from tobacco sheet by 20.2% in one month after cigarette manufacture, and the transfer was continued subsequently. Maximum menthol transfer in five months was 4.1% to foils and other packing materials and the loss outside of cigarette pack was also 3.9% below. The migration balance of menthol into cigarette pack and the delivery to cigarette smoke were the optimum condition when menthol was added at the ration of 30% in filter to 70% in the other parts into cigarette.

Measurement of Dry deposition at Seoul, Chunchon and Anmyon-do by Using Filter pack Method (필터팩을 이용한 서울과 춘천, 안면도의 건성 강하량 측정)

  • Kim, Man-Goo;Kang, Mi-Hee;Hong, Young-Min;Park, Ki-Jun;Lee, Bo-Kyung;Lee, Dong-Soo;Kim, San
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.17 no.1
    • /
    • pp.19-29
    • /
    • 2001
  • Atmospheric concentrations of acidic pollutant were measured by the 4 stage filter pak method at Chunchon and by the 3 stage filter pack method at Seoul and Anmyon-do from January to December 1998. The sample was collected for 24 hours on every Wednesday. Concentrations of particulate matters were highest at Anmyon-do. The particulate concentration was much higher during the warm season than other seasons. While the particulate concentration was higher during the warm season, the concentration of gaseous matter was higher in winter. Dry deposition flux was calculated by using reported deposition velocities and concentration of pollutants measured in this study. The dry deposition velocities used in this study for SO$_2$, SO$_{4}^{2}$, HNO$_3$,NO$_{3}^{-}$ and NH$_3$ were 0.29, 0.15, 2.08( 2.13 only for Anmyon-do), 0.20 and 1.00cm/sec, respectively. At Chunchon, annual sulfur flux originated from dry deposition was 384 kg/$textrm{km}^2$, and the flux from wet deposition was 782kg/$textrm{km}^2$. Dry deposition of sulfur was 33% of total sulfur deposition. The annual nitrogen flux originated from dry deposition was 1,892kg/$textrm{km}^2$. And the flux from wet deposition was 1,066kg/$textrm{km}^2$. Dry deposition of nitrogen was 64% of total nitrogen deposition. Dry deposition as well as wet deposition have to be considerd in the study on acidification of environment such as soil or watershed.

  • PDF

A Study on the Behavior and Deposition of Acid Precipitation-Measurement of Dry Deposition in Chunchon and Seoul by Using Filter Pack Method (산성강하물의 침착량과 동태 해명에 관한 연구 - 필터팩을 이용한 춘천과 서울의 건성강하물의 농도 측정)

  • Kim, Man-Goo;Park, Ki-Jun;Kang, Mi-Hee;Hwang, Hoon;Lee, Bo-Kyung;Lee, Dong-Soo
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.15 no.1
    • /
    • pp.53-61
    • /
    • 1999
  • Acid aerosol and gas concentrations ($SO_4^{2-}$, $NO_3^-$, $HNO_3$, $SO_2$, and $NH_3$) were measured at Chunchon and Seoul, Korea using filter pack method during one year from October 1996 to september 1997. The samples were collected during 24 hours every Wednesday in a week from 10 A.M. with 10$\ell$/min of sample flow. Concentration of $HNO_3$, $SO_2$ and $NH_3$ gases showed typical seasonal variation. The $HNO_3$ showed the highest in summer and annual mean concentrations were 0.42 ppb and 0.57 ppb at Chunchon and Seoul, respectively. The $SO_2$ showed the highest in winter and annual mean concentration was 5.59 ppb at Chunchon. The $NH_3$ showed the highest in early summer and annual mean concentration were 5.15 ppb and 6.28 ppb at Chunchon and Seoul, respectively.

  • PDF

Characteristics of particles at Kosan, Cheju Island: Intensive study results duting March 11 .sim. 17 1994 (제주도 고산지역 입자특성 : 1994년 3월 11일 - 17일 측정결과)

  • 김용표;심상규;문길주;백남준;김성주;허철구;강창희
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.11 no.3
    • /
    • pp.263-272
    • /
    • 1995
  • Characteristics of anbient at Korean, Cheju Island have been studied during the intensive field study period on March 11 .sim. 17, 1994 in collaboration with other research organizations from Korea and abroad. The particle size distribution was measured using an Electrical Aerosol Analyzer(EAA) and an Optical particle Counter(OPC). Fine particles(PM1 and PM3) have been collected by filter pack samplers and their ionic compositions have been analyzed. sampling errors inherent to the filter pack sampling method are discussed and the method to analyze those errors are presented. The rine mass concentrations of this study show very similar mass concentrations when Seoul is clear. This is somewhat surprising result, because the most of researchers believe that Kosan is one of the cleanest area in Korea. Bimodal volume size distributions with peak values around 0.1 .sim. 0.2.mu.m and 3.mu.m in particle dimeter were observed for most of the measurement period, particle mass loadings and ionic composition data show a large fraction of particles are from non-sea salt origins. Estimation of water content and acidity of particles based on measurement by a gas/particle equilibrium model, SCAPE, reveals that the pH values of particles are comparable to or lower than those estimated based on measurements in Los Angeles, U.S.A. during the SCAQS study. These findings with the meteorological conditions during the study period suggest that the particles collected during the period have originated from outside Cheju Island.

  • PDF

Study on the Controller Design Method for Battery Energy Storage System using Linearized Battery Model (선형 배터리 모델을 이용한 에너지 저장장치의 제어기 설계기법에 관한 연구)

  • Kim, Il-Song
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.19 no.6
    • /
    • pp.530-537
    • /
    • 2014
  • A controller design method for a battery-energy storage system using a linearized battery model is presented in this paper. The suggested linear battery model is expressed with open-circuit voltage having three relaxation filters and a linear output equation. A method to obtain on-line resistance and maximum available power is also presented. The battery state of charge information is obtained by Kalman filter, and its performance is verified by FTP75 driving cycles. The controller for power converter is designed and experimented with a 250 V battery pack. The proposed control method is simple and easy to apply to a real system.

Battery State Estimation Algorithm for High-Capacity Lithium Secondary Battery for EVs Considering Temperature Change Characteristics

  • Park, Jinho;Lee, Byoungkuk;Jung, Do-Yang;Kim, Dong-Hee
    • Journal of Electrical Engineering and Technology
    • /
    • v.13 no.5
    • /
    • pp.1927-1934
    • /
    • 2018
  • In this paper, we studied the state of charge (SOC) estimation algorithm of a high-capacity lithium secondary battery for electric vehicles (EVs) considering temperature characteristics. Nonlinear characteristics of high-capacity lithium secondary batteries are represented by differential equations in the mathematical form and expressed by the state space equation through battery modeling to extract the characteristic parameters of the lithium secondary battery. Charging and discharging equipment were used to perform characteristic tests for the extraction of parameters of lithium secondary batteries at various temperatures. An extended Kalman filter (EKF) algorithm, a state observer, was used to estimate the state of the battery. The battery capacity and internal resistance of the high-capacity lithium secondary battery were investigated through battery modeling. The proposed modeling was applied to the battery pack for EVs to estimate the state of the battery. We confirmed the feasibility of the proposed study by comparing the estimated SOC values and the SOC values from the experiment. The proposed method using the EKF is expected to be highly applicable in estimating the state of the high-capacity rechargeable lithium battery pack for electric vehicles.

Characteristics of Chemical Species in $PM_{205}$ during the Winter in Kangwha (강화도 지역에서 겨울철 $PM_{205}$의 화학적 성분 특성)

  • 여현구
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.16 no.4
    • /
    • pp.309-316
    • /
    • 2000
  • Chemical compositions of air pollutants with fine particles (<2.5 ${\mu}{\textrm}{m}$, PB2.5) were evaluated at background site. Kangwha. in Korea during the winter season. The data set was obtained for seventeed days with 24-hour sampling from December 11 to 16, 1996 and from January 9 to 1997. The chemical species have been measured {{{{ {SO }`_{4 } ^{2- } }}}}, {{{{ { NO}`_{3 } ^{- } }}}}, {{{{ { NH}`_{4 } ^{+ } }}}}. OC and EC in the particulate phase, NH3 HNO3, HCl and SO2 in the gas phase using the three stage filter pack method. Mean concentration ($\mu\textrm{g}$/m3) of this study were : 35.42 for PM2.5 8.78 for organic carbon (OC) 7.25 for nss {{{{ {SO }`_{4 } ^{2- } }}}}, 4.94 for {{{{ { NO}`_{3 } ^{- } }}}}, 3.58 for {{{{ { NH}`_{4 } ^{+ } }}}} and 1.48 for elemental carbon (EC) respectively. Contributive rates of major particulate components in PM2.5 were OC (25%) nss- {{{{ {SO }`_{4 } ^{2- } }}}}(20%) ,{{{{ { NO}`_{3 } ^{- } }}}}(14%) {{{{ { NH}`_{4 } ^{+ } }}}}(10%) and EC (4%) respectively and these components could be accounted for 73% of PM2.5 mass. Reactive forms of {{{{ { NH}`_{4 } ^{+ } }}}} were considered as NH4HO3 and NH4{{{{ {SO }`_{4 } ^{2- } }}}} during the sampling periods. {{{{ { NO}`_{3 } ^{- } }}}}/({{{{ { NO}`_{3 } ^{- } }}}} + HNO3) and {{{{ {SO }`_{4 } ^{2- } }}}}/({{{{ {SO }`_{4 } ^{2- } }}}} + SO2) were calculated 0.8 and 0.9 respectively. Most of these compounds might be formed in partiiculate phase in the air. Correlation coefficient between OC and EC was 0.866 which might have the same sources during the sampling periods,.

  • PDF

Performance Comparison of DCT Algorithm Implementations Based on Hardware Architecture (프로세서 구조에 따른 DCT 알고리즘의 구현 성능 비교)

  • Lee Jae-Seong;Pack Young-Cheol;Youn Dae-Hee
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.6C
    • /
    • pp.637-644
    • /
    • 2006
  • This paper presents performance and implementation comparisons of standard and fast DCT algorithms that are commonly used for subband filter bank in MPEG audio coders. The comparison is made according to the architectural difference of the implementation hardware. Fast DCT algorithms are known to have much less computational complexity than the standard method that involves computing a vector dot product of cosine coefficient. But, due to structural irregularity, fast DCT algorithms require extra cycles to generate the addresses for operands and to realign interim data. When algorithms are implemented using DSP processors that provide special operations such as single-cycle MAC (multiply-accumulate), zero-overhead nested loop, the standard algorithm is more advantageous than the fast algorithms. Also, in case of the finite-precision processing, the error performance of the standard method is far superior to that of the fast algorithms. In this paper, truncation errors and algorithmic suitability are analyzed and implementation results are provided to support the analysis.