• 문화기술의 융합
• /
• 제7권2호
• /
• pp.69-76
• /
• 2021

본 연구는 미용전문대학생들을 대상으로 현장실습에 참여한 학생들의 관점에서 구체적으로 어떤 경험을 하였는지에 대한 깊이를 확인하고 어떠한 과정에서 실천적 지식과 의미에 대해 구성해 나가는지를 심층적으로 파악하기 위해 현상학적 방법으로 분석하였다. 연구대상은 미용전문대학생들 현장실습 경험이 있는 9명을 대상으로 하였으며, 2020년 10월부터 12월까지 심층 명담으로 하였다. 수집된 자료는 Colaizzi방법으로 분석하였다. 본 연구의 결과는 '현장실습에 대한 기대', '실무교육의 필요성', '현장실습에서 경험한 어려움', '현장실습의 견딤' 4개의 본질적인 주제모음이 나타났다. 본 연구 결과를 바탕으로 미용과의 현장실습을 수행함에 있어서 현장실습을 대처하기 위한 자신감을 가지고 학습경험의 효과성이 증진될 수 있도록 학습경험의 효과성이 증진될 수 있도록 보다 체제적으로 디자인 되어야하는 중요성이 필요할 것이다.

• 한국조경학회지
• /
• 제31권5호
• /
• pp.43-57
• /
• 2003

This paper presents the air corridor planning strategy based on simulation with MUKLMO_3 (Micro-scale Urban Climate Model) to investigate the wind field and air corridor caused by the land-use change of the New Town Development Area in Pan-Gyo. In the first part, the most frequently observed wind field in the New Town Development Area was measured and used as an initial value to simulate a more realistic wind field and air corridor. Several experiments with different initial values of wind fields were carried out to investigate the wind field change affected by the New Town Development. The results show the features of the wind field of the neutral stability condition in the urban canopy layer with a high resolution near the ground. The wind speed is weakened at this level due to the New Town Development. It was found that the wind field and air corridor are influenced by the land-use change. After the development of the New Town, the speed of the wind field decreased and the main wind directions and air corridor changed. In this study, this model is found to be a useful tool for evaluating air corridor and change of wind field in speed and direction.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.819-822
• /
• 2002

It is necessary for the numerical simulation of 3-dimensional incompressible isotropic decaying turbulence to construct 3-dimensional initial velocity field which resembles the fully developed turbulence. Although the previous velocity field generation method proposed by Rogallo(1981) satisfies continuity equation and 3-dimensional energy spectrum, it has limitation, as indicated in his paper, that it does not produce the higher velocity moments(e. g. velocity derivative skewness) characteristic of real turbulence. In this study, a new velocity field generation method which is able to control velocity derivative skewness of initial velocity field is proposed. Brief descriptions of the new method and a few parameters which is used to control velocity derivative skewness are given. A large eddy simulation(LES) of isotropic decaying turbulence using dynamic subgrid-scale model is carried out to evaluate the performance of the initial velocity field generated by the new method. It was shown that the resolved turbulent kinetic energy decay curve and the resolved enstrophy decay curve from the initial field of new method were more realistic than those from the initial field of Rogallo's method. It was found that the dynamic model coefficient from the former was initially half the stationary value and experienced relatively short transition period, though that from the latter was initially zero and experienced relatively longer transition period.

• 한국소음진동공학회논문집
• /
• 제13권10호
• /
• pp.743-750
• /
• 2003

The equivalent source method(ESM) is used for the calculation of the internal pressure field for an enclosure which can have arbitrary boundary conditions and nay include internal objects which scatter the sound field. The advantage of using ESM is that it requires relatively low computing cost and is easy to model the internal diffracting objects. Typical ESM modeling uses two groups of equivalent source positions. One group includes the first order images of the source inside the enclosure. The Positions of the other group are usually on a spherical surface some distance outside the enclosure. The normal velocity on the surfaces of the enclosure walls is evaluated at a larger number of positions than there are equivalent sources. The sum of the squared difference between this velocity and the expected is minimized by adjusting the strength of the equivalent sources. This study is on the optimal far field sources positions when using the equivalent source method. In general, the far field sources are evenly distributed on a surface of a virtual sphere which is centered at the enclosure with a sufficiently large radius. In this study. optimal far field source locations are searched using simulated annealing method for various radii of spheres where far field sources are located. Simulation results showed that optimally located sources with adequate distance away from the enclosure center gave better result than sources with even distribution even with a smaller number of far field sources.

• 간호행정학회지
• /
• 제19권4호
• /
• pp.536-543
• /
• 2013

Purpose: The purpose of this study was to identify the mediating effect of professionalism in the relationship between clinical competence and field adaptation in newly graduated nurses. Methods: The participants in this study were 213 nurses from four tertiary hospitals who had less than 12 months of nursing experience. Data were collected during January and February, 2013. A structured questionnaire was used for data collection and data were analyzed using descriptive statistics, Pearson correlation coefficients, and path analysis with the SPSS/WIN 21.0 and AMOS 21.0 programs. Results: The mean score for clinical competence was $2.85{\pm}0.25$, for professionalism, $3.10{\pm}0.30$, and for field adaptation, $2.79{\pm}0.37$. There was a significant positive relationship between clinical competence and field adaptation. Also, professionalism was positively correlated with field adaptation. Professionalism showed mediating effects between clinical competence and field adaptation. Improvement of clinical competence increased professionalism and the increased professionalism raised the field adaptation. Conclusion: Based on these findings, orientation programs including strategies to increase professionalism, should be established to promote effective field adaptation in newly graduated nurses. These orientation programs can strengthen professionalism, the mediator between clinical competence and field adaptation in newly graduated nurses.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1511-1516
• /
• 2009

In recent years, the large-scale shaft have been appling in domestic mine for mass production using a large machine, the safety of mine also have been increasing. And the new trial that shotcrete of tunnel field was apply to mine support was progressed. But, the conditions of domestic mine was different from that of tunnel, so, the batch plant of tunnel could not be installed in mine field because of low economical efficiency and difficulty for selection of site. Ready-mixed Shotcrete that mixed with high quality materials and could be controled shotcrete quality is producted in plants and transported to field, so do not need to batch plant. In this study, The Field test of the Ready-mixed Shotcrete was performed in the large-scale mine and was compared with the quality of Field mix shotcrete. As the result of the Field test, compressive strength and rebound of Ready-mixed Shotcrete were superior to these of Field mix shotcrete.

• 한국전기전자재료학회논문지
• /
• 제22권5호
• /
• pp.436-442
• /
• 2009

This paper describes a study on the design of compact polymer bushing with inner control shield. In the bushing, a high electric stress occurred between field shaper and central conductor by the closely space. Also coaxial cylindrical shield has a great height along the axis to control an electric field. Consequently, all the potentials are raised axially along the field shaper and electric stress is concentrated on a part of the surface of the FRP tube near the upper end of the field shaper. In accordance, the field control can be achieved by means of the designs of such inner control shields. The floating and ring shield designs was decreased electric field concentration at critical parts of the bushing. The shield gaps is formed between field shaper and ring shield. Accordance equipotential lines extend through gaps. As a result, the resulting electrical stress are thus reduced in the range $17{\sim}23%$ in the bushing with floating and ring shield designs. Maxwell 2D simulator based on the boundary element method was also introduced in order to verify the reliability of the polymer bushing. The optimized design uses internal elements for electric stress grading at critical parts of the bushing.

• 대한산업공학회지
• /
• 제27권2호
• /
• pp.190-196
• /
• 2001

This study aims to develop three types of the visual fields: stationary field, eye field, and head field, which are classified depending upon the eye and head movements. A visual experiment taking target size, target color, and meridian into account was conducted, in which the L32 orthogonal array was employed. The results showed that target size and meridian were significant at ${\alpha}$=0.01 in all three visual fields. Contrary to expectation, target color was significant at ${\alpha}$=0.10 only in the head field. Furthermore, the differences in size of the head field depending upon four target colors were negligibly small. Three linear regression models were provided to generate visual fields which are appropriate for given visual task's characteristics. In addition, a simple method using adjusting factor was also proposed so that anyone without knowledge for human factors/ergonomics can easily generate and use them when designing or evaluating visual tasks. It is expected that the visual fields presented in this study can be easily used even by non-ergonomic experts in real situations due to their simplicity.

• 수산해양교육연구
• /
• 제27권6호
• /
• pp.1628-1645
• /
• 2015

This study was designed to analyze the present condition of the lifelong education field training program and to implement the need assessment of field training program based on the job model application. In order to achieve these goals, surveys were conducted through questionnaires and in-depth interviews targeting staffs of lifelong education institution in Busan area. The 115 subjects were analyzed by frequency distribution, the paired samples t-test, and the Borich's need analysis. The result showed that the field training program was poorly executed during the year of 2013 due to deficiency of certified practitioners and systematic guidelines. Also, the most highly demanded tasks were promoting change, networking, planning, developing programs and conducting surveys among various roles of lifelong educators. On the other hand, the need for the assisting and supporting programs were relatively low. Finally, this study concluded the need for developing systematic guidelines and for accrediting as a lifelong education field training institution nationwide. The results of this study would ultimately contribute to enhance the quality of lifelong education field training program.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1552-1553
• /
• 2011

The HVDC transformer which is one of the main equipments for HVDC(High Voltage Direct Current) electric power transmission systems is exposed to not only AC voltage but also the inflowing DC voltage which comes from the DC-AC converter systems. Therefore, the HVDC transformer insulation system is required to withstand the electric field stress under AC, DC and DC polarity reversal conditions. However the electric field distributions under those conditions are different because the AC electric field and DC electric field are governed by permittivity and conductivity, respectively. In this study, the changes of electric potential and electric field of conventional AC transformer insulation system under DC polarity reversal test condition were analyzed by FEM(Finite Element Method). The DC electric field stress was concentrated in the solid insulators while the AC electric field stress was concentrated in the mineral oil. In addition, the electric stress under that condition which is affected by the surface charge accumulation at the interfaces between insulators was evaluated. The stress in some parts could be higher than that of AC and DC condition, during polarity reversal test. The result of this study would be helpful for the HVDC transformer insulation system design.