• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

• Journal of Intelligence and Information Systems
• /
• v.25 no.3
• /
• pp.221-238
• /
• 2019

Recently, companies and public institutions have been actively introducing chatbot services in the field of customer counseling and response. The introduction of the chatbot service not only brings labor cost savings to companies and organizations, but also enables rapid communication with customers. Advances in data analytics and artificial intelligence are driving the growth of these chatbot services. The current chatbot can understand users' questions and offer the most appropriate answers to questions through machine learning and deep learning. The advancement of chatbot core technologies such as NLP, NLU, and NLG has made it possible to understand words, understand paragraphs, understand meanings, and understand emotions. For this reason, the value of chatbots continues to rise. However, technology-oriented chatbots can be inconsistent with what users want inherently, so chatbots need to be addressed in the area of the user experience, not just in the area of technology. The Fourth Industrial Revolution represents the importance of the User Experience as well as the advancement of artificial intelligence, big data, cloud, and IoT technologies. The development of IT technology and the importance of user experience have provided people with a variety of environments and changed lifestyles. This means that experiences in interactions with people, services(products) and the environment become very important. Therefore, it is time to develop a user needs-based services(products) that can provide new experiences and values to people. This study proposes a chatbot development process based on user needs by applying the design thinking approach, a representative methodology in the field of user experience, to chatbot development. The process proposed in this study consists of four steps. The first step is 'setting up knowledge domain' to set up the chatbot's expertise. Accumulating the information corresponding to the configured domain and deriving the insight is the second step, 'Knowledge accumulation and Insight identification'. The third step is 'Opportunity Development and Prototyping'. It is going to start full-scale development at this stage. Finally, the 'User Feedback' step is to receive feedback from users on the developed prototype. This creates a "user needs-based service (product)" that meets the process's objectives. Beginning with the fact gathering through user observation, Perform the process of abstraction to derive insights and explore opportunities. Next, it is expected to develop a chatbot that meets the user's needs through the process of materializing to structure the desired information and providing the function that fits the user's mental model. In this study, we present the actual construction examples for the domestic cosmetics market to confirm the effectiveness of the proposed process. The reason why it chose the domestic cosmetics market as its case is because it shows strong characteristics of users' experiences, so it can quickly understand responses from users. This study has a theoretical implication in that it proposed a new chatbot development process by incorporating the design thinking methodology into the chatbot development process. This research is different from the existing chatbot development research in that it focuses on user experience, not technology. It also has practical implications in that companies or institutions propose realistic methods that can be applied immediately. In particular, the process proposed in this study can be accessed and utilized by anyone, since 'user needs-based chatbots' can be developed even if they are not experts. This study suggests that further studies are needed because only one field of study was conducted. In addition to the cosmetics market, additional research should be conducted in various fields in which the user experience appears, such as the smart phone and the automotive market. Through this, it will be able to be reborn as a general process necessary for 'development of chatbots centered on user experience, not technology centered'.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.3
• /
• pp.11-28
• /
• 2021

Due to its size and complex characteristics, it is not often to newly create a large park within an existing urban area. Also, there has been a lack of research on the planting design methodologies for a large park. This study aims to elucidate how ecological ideas can be applied to planting practice from a designer's perspective, and eventually suggest a planting design framework in the actual case, the Central Park in the City of Gwangju. This framework consists of spatial structure of planting area in order to connect and unite the separated green patches, to adapt to the changes of existing vegetation patterns, to maintain the visual continuity of landscape, and to organize the whole open space system. The framework can be provided for the spatial planning and planting design phase in which the landscape designer flexibly uses it with the design intentions as well as with an understanding of the physical, social, and aesthetic characteristics of the site. The significance of this approach is, first that it can maintain ecological and visual consistency of the both existing and introduced landscapes as a whole in spite of its intrinsic complexity and largeness, and second that it can help efficiently respond to the unexpected changes in the landscape. In the case study, comprehensive site analysis is conducted before developing the framework. In particular, wetlands and grasslands have been identified as potential wildlife habitat which critically determines the vegetation patterns of the green area. Accordingly, the lists of plant communities are presented along with the planting scheme for their shape, layout, and relations. The model of the plant community is developed responding to the structure of surrounding natural landscape. However, it is not designed to evolve to a specific plant community, but is rather a conceptual model of ecological potentials. Therefore, the application of the model has great flexibility by using other plant communities as an alternative as long as the characteristics of the communities are appropriate to the physical conditions. Even though this research provides valuable implications for landscape planning and design in the similar circumstances, there are several limitations to be overcome in the further research. First, there needs to be more sufficient field surveys on the wildlife habitats, which would help generate a more concrete planting model. Second, a landscape management plan should be included considering the condition of existing forest, in particular the afforested landscapes. Last, there is a lack of quantitative data for the models of some plant communities.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.12
• /
• pp.61-67
• /
• 2023

Heat pipes located underground in urban areas and operated under high temperature and pressure conditions can cause large-scale human and economic damage if damaged. In order to predict damage in advance, damage and construction information of heat pipe are analyzed to derive independent variables that have a correlation with frequency of damage, and a simple regression analysis modified model using each variable is applied to the field. However, as the correlation between independent variables applied to the model increases, the independence between variables is harmed and the reliability of the model decreases. In this study, the independence of the pipe diameter, burial depth, insulation level of monitoring system, and disconnection or short circuit of the detection line, which are judged to be interrelated, was tested to derive a method for combining variables and setting categories necessary to apply to the frequency of damage estimation model. For the test of independence, the continuous variables pipe diameter and burial depth were each converted into three categories, insulation level of monitoring system was converted into two categories, and the categorical variable disconnection or short circuit of the detection line status was kept as two categories. As a result of the test of independence, p-value between pipe diameter and burial depth, level of monitoring system and disconnection or short circuit of the detection line was lower than the significance level (α = 0.05), indicating a large correlation between them. Therefore, the pipe diameter and burial depth were combined into one variable, and the categories of the combined variable were set to 9 considering the previously set categories. The insulation level of monitoring system and the disconnection or short circuit of the detection line were also combined into one variable. Since the insulation level is unreliable when the detection line status is disconnection or short circuit, the categories of the combined variable were set to 3.

• Journal of the Korean Society of Costume
• /
• v.64 no.2
• /
• pp.35-49
• /
• 2014

In cases of fashion businesses operating by consignment, base estimate on quantity of sales is the most essential part of merchandising. This study classified factors influential to sales into factors with systematic influence and factors with unsystematic influence. In order to find out influence of each factor on sales, non-linear regression was used with SPSS package on the basis of actual data on sales for 5 years for sport shoes brand. Major findings of this study are as follows. First, price level had significant negative(-) influence on sales. Second, price expectation effects had significant negative(-) influence on sales. Third, competitor's price effect showed significant negative(-) value. Fourth, day-of-the-week effect showed significant positive(+) effect. The theoretical marketing implications of this study are as follows. First, study on price leads to expansion of the researches from apparels to sport shoes. Field of study on price was enlarged through expansion of variable of study from price level and price expectation effect to promotion, day-of-the-week effect and rainfall effect. Second, quantitative scale of day-of-the-week effect was found and it could be confirmed that there was seasonal differences with day-of-the-week effect. Implications of above findings on marketing managers are as follows. First, it was found that an increase in competitiveness of brand power and a decline in absolute value of competitor's price effect can be realized when new product groups are developed to meet the unsatisfied needs in the market. Second, it was possible to find out the parameters scales of the price response function, making it possible to estimate sales for the next season, and in turn realize increase in rate of sales and profit rate. This research is based on the dynamic price response function, which is rare to find in the apparel business and it academic significance due to its expanding response model which was focused on price in conventional researches to non-systematic variables.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.8
• /
• pp.974-985
• /
• 2016

Riverbed Modeler, which is a commercial packet-level discrete event simulator is used to model, design, and simulate complicated communication protocols and large-scale network. Riverbed Modeler got credit for its reliability in field of network simulation. In the MANET simulation environment using Riverbed Modeler, it is very complicated to add a new routing protocol into existing architecture of routing protocols because it is required lots of modifications of protocol recognition. In this paper, we propose Routing Adding Framework which can reduce errors or mistakes during modifying the existing routing support architecture. Routing Adding Framework is provided as a adapter API for protocol recognition. and it is only minimum modifications for protocol identifiers when a new routing protocol is added to the child process of manet_mgr process which manages routing protocols for IP layer. With Routing Adding Framework, we can reduce less than half modification. Then, we shows an example of implementation of a hybrid routing protocol AntHocNet using Routing Adding Framework, and we verify its design and application of the Routing Adding Framework by obtaining simulation result with similar result given by AntHocNet.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3740-3747
• /
• 2009

To protect the citizens' health of Gyeongju and to secure basic data for the assessment of health and environmental risk, distribution characteristics of meteorological elements were investigated and numerical simulation of wind field using RAMS model was carried out. In addition, measurement and analysis of air pollutants, forecasting the behavior air pollutants using ISC-AEROMOD view, and health and environmental risk-influenced zones were defined through managing air polluting materials to prevent health damage and property damage. According to the survey results of air pollution in Gyeongju and surroundings, average annual concentration of air pollutants in Gyeongju was slightly lower than that in Pohang and Ulsan areas, but concentration of particulate matters and nitrogen dioxide at Gyeongju Station Square and Yonggang Crossing were sometimes higher than that in Pohang and Ulsan areas. Results of the modeling of moving and diffusion of air pollutants that affect citizens' health showed that parts of the 1st through 4th industrial complexes together with POSCO were included in particulate matters and sulfur dioxide influenced areas in Pohang Steel Complex area, and that Haedo-dong, Sangdae-dong, Jecheol-dong and Jangheung-dong in Pohangnam-gu represented locally worsened air quality due to a quantity of air pollutant emission from dense steel industries and large scale industrial facilities.

• Research in Plant Disease
• /
• v.17 no.3
• /
• pp.317-325
• /
• 2011

Bacterial pustule of soybean (Glycine max) caused by Xanthomonas axonopodis pv. glycines is one of the most prevalent bacterial diseases of soybean in Korea, where it causes considerable yield loss. This study was carried out to develop yield prediction model for bacterial pustule by analyzing correlation between the percentage of diseased leaf area and yield. The severe disease incidence of soybean bacterial pustule caused yield losses by 19.8% in 2006 and 16.8% in 2007, respectively. Severity of bacterial pustule greatly affected on 100 seed weight and yield, but did not on stem length, number of branches per plant, number of pods per plant, number of seeds per plant. On the other hand, correlation coefficients between diseased leaf area and yield were $-0.93^*$('06) and $-0.77^*$('07), respectively. The regression equation obtained by analyzing correlation between the percentage of diseased leaf area and yield loss in 2006 and in 2007 was y = -3.2914x + 348.19($R^2$ = 0.8603) and y = -2.9671x + 302.08($R^2$ = 0.9411), respectively. These results will be helpful in estimating losses on a field-scale and thereby predicting the production of soybean.

• 대한공업교육학회지
• /
• v.38 no.1
• /
• pp.29-48
• /
• 2013

The purpose of this research is to provide a desirable case of STEAM education utilizing 'Energy and Transportation Technology' unit on the subject of technology home economics. The middle school students learned with the integrated approach based on STEAM integrated education, and through production process they had the opportunity for application and expression in diverse forms. The results of this process to achieve the purpose are as follows. First, as the procedural model to develop STEAM program utilizing 'Energy and Transportation Technology' unit on the subject of technology home economics, the five stages: preparation, development, verification, practice, and evaluation, were presented. The preparation stage was composed of requirement analysis, the selection of program subject, and STEAM program curriculum analysis, the selection and organization of STEAM program lesson. The development stage was composed of the development of lesson plan, multimedia teaching materials, worksheet and worksheet answer key. In the verification stage, the verification of validity by experts was conducted, and in the practice stage, the developed program was applied to the middle school students in the educational field, and in the evaluation stage, based on the evaluations received from learners and teachers, it was revised and supplemented. Second, the STEAM program was developed into the program summary map, lesson plan, multimedia teaching materials, worksheet and worksheet answer, etc., and after the validity was secured through experts' verification, it was revised and supplemented and applied to actual classes. Third, the results of the learners' evaluation of the developed STEAM program showed that the degree of satisfaction with the program was high with the average score of the entire questions being 4.00 on a five-point scale. As the teachers also evaluated the developed STEAM program as very effective, the opinions of learners and teachers were collected and the program was finally improved and completed.

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.315-326
• /
• 2020

Corporate efforts to build strong brands have made consumers interested in brand love. In the field of brand love, however, there is a lack of systematic research on the multidimensionality of the concept of brand love and on the scale development to measure it. Thus, based on the methodological research design of Churchill(1979) and DeVellis(1991), this study explored properties of brand love and classified them into two levels - 'emotion' and 'relationship' - and generated corresponding measurement items. To do this, the research was conducted in a total of eight stages, including preliminary studies such as literature review, open surveys, and in-depth interviews, as well as the main study process in which the factors were analyzed step by step. As a result, the level of emotion appeared to have five subcomponents (self-esteem, warmth, interest, responsibility, pleasure) with 19 items, and the level of relationship - three subcomponents (unchanging, sharing/supporting, understanding) with 11 items, adding up to a total of 30 measurement items for brand love with reliability, convergent and discriminant validity, and nomological validity. Additionally, we intended to expand the scope of research related to brand love by presenting the result model of organic interaction between the concepts that constitute brand love and proposing '4 categories of brand love strength' based on it.