• Advances in concrete construction
• /
• v.15 no.6
• /
• pp.377-389
• /
• 2023

In this study, an improved modular arch system with the lower arch space composed of a precast arch block and an outrigger was proposed as an underground culvert, and its applicability and structural behaviors were confirmed. This modular arch culvert structure with vertical walls was designed using precast blocks and by adjusting the placement spacing of concrete blocks to the upper part form an arch shape and the lower part form a vertical wall shape, based on previously researched modular arch systems. Owing to the vertical wall of the proposed modular arch system, it is possible to secure a load-carrying capacity and an arch space that can sufficiently resist the earth pressure generated from the backfill soil and loading on the arch system. To verify the structural characteristics, and applicability of the proposed modular precast arch culvert structure, a full-scale modular culvert specimen was fabricated, and a loading test was conducted. By examining its construction process and loading test results, the applicability and constructability of the proposed structure were analyzed along with its structural characteristics. In addition, its the structural predictability and safety for the applicability were evaluated by comparing the construction process and loading test results with the FE analysis results.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.4
• /
• pp.75-91
• /
• 2017

This study investigated how learning motivation affects satisfaction with training and employment services and its performance for participants in government-supported job skill development program of the clothing industry so as to provide fundamental data for developing a training program that fosters professionals and relieves the labor shortage in the clothing industry. 180 copies of questionnaires were statistically analyzed by SPSSWIN 21.0. Most trainees were low-income citizens in their 40s and 50s. They were divided into highly educated or low-educated. The results of the research are as follows: when the trainees were motivated by the goals of getting a certificate or a job, employment service satisfaction levels were influenced meaningfully. Secondly, educational satisfaction levels and occupational ability development also scored highly. Therefore, it is important to strengthen instructors' competency. Instructors must be required to have onsite experience so that they can provide authentic education that can be applied to the work field. The government should establish a compulsory training session for the trainers along with an incentive program so that they can catch up with up-to-date technology and trend. Third, the research shows that supporting business startup and job placement is important. Follow-up management systems should be provided in cooperation with relevant institutions of employment and business startups. Either outsourcing or placement of professional advisors is also needed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.7
• /
• pp.76-81
• /
• 2011

A new via cutting structure in 2-layer DRAM package substrate has been fabricated to lower its power distribution network(PDN) impedance. In new structure, part of the via is cut off vertically and its remaining part is designed to connect directly with the bonding pad on the package substrate. These via structure and substrate design not only provide high routing density but also improve the PDN impedance by shortening effectively the path from bonding pad to VSSQ plane. An additional process is not necessary to fabricate the via cutting structure because its structure is completed at the same time during a process of window area formation. Also, burr occurrence is minimized by filling the via-hole inside with a solder resist. 3-dimensional electromagnetic field simulation and S-parameter measurement are carried out in order to validate the effects of via cutting structure and VDDQ/VSSQ placement on the PDN impedance. New DRAM package substrate has a superior PDN impedance with a wide frequency range. This result shows that via cutting structure and power/ground placement are effective in reducing the PDN impedance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.10
• /
• pp.875-887
• /
• 2015

The optimal layout design is used in the development of various areas of industry. In the field of space systems, components must be placed properly in the limited space of spacecraft by considering mechanical, thermal and electrical interfaces. When applying optimal layout design, a proper, even ideal placement of components is possible in the limited space of a satellite platform. Through the optimal placement design, the minimized moment of inertia enhances efficient attitude control, rapid maneuver and mission performance of the satellite. This paper proposes 3D optimal layout design that minimizes the spacecraft's moment of inertia and effect of thermal dissipation between inner components as well as interference between inner components based on a cubic-structure satellite platform. This study proposes the new genetic algorithm for 3D optimal layout design of the satellite platform.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.2
• /
• pp.184-191
• /
• 2014

In the mandibular posterior molar area, ridge deficiency is an unfortunate obstacle in the field of implant dentistry. Many techniques are available to rebuild the deficient ridge. Selection and necessity of these techniques are associated with significant morbidity and often require a second surgical site. With the advent of guided bone regeneration (GBR), one may now graft the deficient ridge with decreased morbidity and without a second surgical site. In this case, guided bone regeneration procedures were performed with a combination of allograft, xenograft, and alloplast, excepting autogerous bone at severe defected mandibular alveolar ridge and then placed to the implant successfully. We report that implant placement were good in two cases.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.3
• /
• pp.95-101
• /
• 2009

Constructing large-scale mat foundation mass concrete is increasing for the stability of building structure, because a lot of high rise building are being built in order to make full use of limited space. However, It is of increasing concerns that because limited placing equipments, available job-site and systems for mass concete placement in construction field do not allow to place great quantity of concrete at the same time in large scale mat foundation, consistency between placement lift can not be secured. And also, it is likely to crack due to stress caused by the difference of hydration heat generation time. To find out the solution against above problems, this study is to reconfirm the performance of normal concrete designed by mix proportion and super retarding concrete. The Fundamental test shows what happens if low heat proportioning and control method of setting time are applied at the job-site of newly constructed high rise building. The test result show that slump flow of concrete has been somewhat increased as the target retarding time gets longer, while the air content has been slightly decreased but this is no great difference from normal concrete. The setting time shows to be retarded as target retarding time gets longer, the range of retarding time increases. It is necessary to increase the amount of mix of super retarding agent in the proportion ration by setting curing temperature high since outdoor curing is about 6 hours faster than standard curing, which means the temperature of the concrete will be higher than the temperature of the surrounding environment, due to its high hydration heat when applying in a construction site. The compressive strength of super retarding concrete appears to be lower than normal concrete due to the retarding action in the early stage. However, as the time goes by, the compressive strength gets higher, and by the 28th day the strength becomes the same or higher than normal concrete.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.875-881
• /
• 2007

This study explores the attention effects of PPL(product placement) in multimedia contents. PPL has been attracted attention in multimedia as well as marketing communication field as a beneficiary model. For the research, multimedia screen is divided into 9 sections and the serial 9 digit($1{\sim}9$) is assigned to the each part of the screen. The visual exposure forms of each 9 digit are composed by 2-dimension(2D) and 3-dimension(3D). And the visual exposure patterns of each 9 digit are consisted of stopping and moving image. As a result, the 5th quartering has been proved the most attracted attention regardless of all exposure forms including 2D/3D and slopping/moving image. This means center of the multimedia screen is the best place for PPL. Especially in one digit moving screen the attention of the digit has reached the climax. This suggests moving PPL is able to get more attention than stopping. These results provide the most effective PPL position in the screen of the multimedia and PPL's visual exposure forms for maximizing multimedia user's attention. Finally, these findings can be a guideline fer message arrangements of the multimedia screen.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.1009-1020
• /
• 1996

Direct-seeded rice can have comparable yield with transplanted rice if its inherent problems can be solved. It is a labor-saving technology and can significantly reduce production cost because seedling nursery , pulling , and transplanting are omitted. Turnaround time between cropping is reduced hence the possibility of a third annual crop. But direct-seeded rice is very vulnerable to pest attack (by birds, rats, and golden snails), desiccation, weed infestation, and prone to lodging resulting to unstable crop establishment and inconsistent yield. These problems can be solved by anaerobic seeding (sowing pre-germinated seeds under the soil). It requires precise seed placement into the soil to optimize its benefits. We developed a four-row anaerobic direct seeder (US $ 200 commercial price) for this purpose . It consist of a structural framework mounted with a drum -hopper metering device, flotation type drivewheels, spring-loaded and adjustable furrow closers, and furrow open rs, and a plastic rainguard. It can sow in line pre-germinated seeds into the soil thus permitting the use of mechanical weeders for a chemical-free weed control. Its performance was comparable with the Japanese two-row anaerobic seeder (costing US$400) in terms of seed placement and crop establishment. It was tested with five cultivars. Seeding rate varied from 38 kg/ha to 80kg/ha. Crop establishment ranged from 64 to 99 percent while grain yield varied from 3.0 t/ha to 5.4t/ha. A six-row anaerobic seeder was also developed and adapted to a powertiller for increased capacity , field efficiency , and easier operation. The anaerobic seeder is useful to farmers shifting to direct seeding to reduce rice production cost and to researchers conducting agronomic studies in direct-seeded rice. Blueprint of the machine is available free of charge from IRRI.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.863-873
• /
• 2023

This research explores the efficacy of safety vest colors at construction sites to enhance worker safety. Utilizing the Munsell color system and the Korean Standard Color Analysis program(KSCA), the study developed a prototype safety vest tailored to specific types of construction work. A safety vest with a color contrasting the site's environment significantly improves worker visibility and intuitiveness in identification, potentially reducing safety incidents. The study determined the optimal color specifications(hue, value, chroma) for safety vests in various construction roles, such as 10GY, 8, 8 for rebar placement, 8.75B, 7, 8 for Euroform, 3.75B, 2, 4 for Gangform, and 6.25BG, 5, 10 for steel erection. Feedback from construction experts on these prototypes, particularly regarding the safety vests for rebar placement and steel framework, was overwhelmingly positive(90% approval). Consequently, the proposed safety vest color scheme is deemed highly effective.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.177-183
• /
• 2011

VES-LMC(very-early strength latex modified concrete) has been widely used as repair material for bridge deck overlay or rehabilitation, because it could be opened to the traffic after 3 hours of curing. However, the bright color of VES-LMC disturb driver's sigh. A black VES-LMC, matching to asphalt concrete, was developed and applied at a filed for driver's comfort and safety. The black VES-LMC included 2% carbon black in cement weight ratio. A series of performance evaluation for black VES-LMC was done in terms of field applicability, pavement color and temperature change. The field applicability test result showed that there were no change of workability, slump and air void, and the compressive strengthen developed more than 20MPa after 4 hours of placement. The thermal stress of black VES-LMC was smaller than that of OPC and asphalt concrete, which means the stability of black VES-LMC. The performance evaluation result showed that the black VES-LMC could prevent road icing at below zero temperatures and promote thawing at melting temperature.