• 한국전기전자재료학회논문지
• /
• 제11권1호
• /
• pp.26-32
• /
• 1998

We have studied how the characteristics degradation between effective mobility and field effect mobility of gate channel in p-MOSFET's affects the gate channel length being follow by increased stress time and increased drain-source voltage stress. The experimental results between effective and field-effect mobility were analyzed that the measurement data are identical at the point of minimum slope in threshold voltage, the other part is different, that is, the effective mobility it the faster than the field-effect mobility. Also, It was found that the effective and field-effect mobility. Also, It was found that the effective and field-effect mobility of p-MOSFET's with short channel are increased by decreased channel length, increased stress time and increased drain-source voltage stress.

• 한국가금학회지
• /
• 제29권4호
• /
• pp.255-258
• /
• 2002

본 연구는 성장중인 닭에 있어서 맹장내 혐기성 미생물수와 맹장의 길이와의 관계를 구명하기 위해서 실시되었다. 5주령의 160수의 닭을 80수씩 분리하여 케이지내 사육 (대조구)및 염소 방목장내 염소와 같이 사육 (처리구)의 2처리로 구분하여 실시하였으며, 본 시험기간동안의 사료는 닭의 성장단계에 적합한 시판의 사료를 기초사료로 활용하였다. 시험기간 (5∼8주형)까지의 증체량은 8주령 에서는 대조구가 처리구보다 유의하게 놀았으며(P<0.05), 12주령에서는 처리구가 대조구보다도 유의하게 높았다(p<0.05). 맹장의 길이는 6, 9, 10 및 11주령에 처리구가 대조구보다 유의하게 길었다 (P<0.05). 맹장내 총 혐기성미생물수도 6, 9, 10 빛 11주령에 처리구가 대조구보다 유의하게 많았다(P<0.05). 대조구 및 처리구 함께 맹장의 길이와 증체량간에는 r= 0.816의 상관관계가 인정되었다. 맹장의 길이와 맹장내 혐기성 미생물 수는 대조구 및 처리구 함께 r=0.95이상의 높은 상관 관계가 인정되었다(P<0.01). 결론적으로 성장중인 닭에 있어서 섬유소 함량이 높은 염소의 배설물 섭취 등의 영향에 따른 맹장내 혐기성 미생물 수의 증가가 맹장의 길이 증가에 관계되어진다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제9권1호
• /
• pp.73-81
• /
• 1986

This paper carried out an experiment on the characteristics of time, temperature, electric field and the dependense of electrode materials and gap length by the conduction current of the insulating oil used for x-ray tube housing. The obtained results can be summarized as following: 1. In the x-ray tube housing insulating oil with vacuum condition, conduction current is declined more than the x-ray tube housing insultaing oil with the air, and is held stable states. 2. At the low electric field the higher temperature of the x-ray tube housing insulating oil is increased, the more conduction current. 3. The dependence of electrode material is appeared at the low electric field and the short gap length than the high and the long with Fe> Cu >Al. 4. At the I-E characteristics, the low electric field than 1000 [V/cm] is appeared Ohm's law region, and the high become saturation region. 5. At the same electric field, the longer gap length become, the more conduction current is increased, and the same applied voltage, the longer, the less conduction current is decreased, the less low than high temperature x-ray tube housing insulating oil.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 춘계 학술대회
• /
• pp.513-517
• /
• 2005

This study examined the possibility of using striped field mice as a biological dosimeter or indicator for the environmental radio-surveillance. For this study, the external morphological characteristics and isoenzymic types of dark-striped field mice were studied after they were captured. Among the morphological external characteristics, the dark-brown coat, dark back stripe, head-to-tail length, tail length, and ear length matched the taxonomical characteristics of dark-striped field mice. The analyses on L-lactate dehydrogenase, aspartate aminotransferase, and malate dehydrogenese revealed that one species of dark-striped field mice, called Apodemus agrarius, was inhabitated throughout a wide range of Korea. On the other hand, A. agrarius and ICR mice to analyze their survival rate and frequency of micronuclei in peripheral polychromatic erythrocytes after irradiation (0, 0.5, 1, 3, 5, 7, 9 Gy). The $LD_{50/30}$ of A. agrarius and ICR mice were approximately 5 Gy and 7Gy, respectively. The results of the study reveal that wild A. agrarius have a high potential as a biological monitoring system to determine the impact of radiation effect in areas such as those within the vicinity of nuclear power plants.

• 한국식물병리학회지
• /
• 제11권1호
• /
• pp.94-97
• /
• 1995

In 1994, an abnormal rice growth was observed in a 0.5-ha scale farmer's field located at Chogye-Myeon, Hapcheon-Gun, Gyeongnam Province where rice cv. Hwayeongbyeo was seeded directly in dry paddy field conditions. The major symptoms were less stands per acreage, short leaf length, and hypertrophy of root tip portion. The disorder was identified as rice seeding bight caused by Rhizopus sp. The average plant stand per m2 in the infested field was 108, while it was 375 in the normal field, and leaf growth was retarded to less than one-third of healthy plant. The average leaf lengths of infected and healthy seedlings were 12.8cm and 38.9cm, respectively. When the infected seedlings were transplanted to pots, flooded-soil conditions developed no new root growth but upland conditions allowed 11.2 new roots emerging. The length of newly emerged root in infested soil was 5.3cm in upland and 7.1cm in intermediate flooding conditions. However, it was 10.9cm in non-infested soil with intermediate flooding conditions. When the plants were matured, the stem length of infected plants was reduced slightly as compared to normal plants, whereas the length of panicle was not significantly different between infected and healthy plants. The number of panicle per plant, however, greatly different with variation of infection degree. Grain quality such as the number of complete and incomplete grains per panicle, the complete grain weight per panicle, and the weight of 1000 grains was not significantly different.

• 소성∙가공
• /
• 제4권1호
• /
• pp.59-69
• /
• 1995

A simple kinematically admissible velocity field is proposed to determine the final-stage extrusion load and the average extruded length in the square-die forward extrusion of regular polygonal-shaped bars from circular billets. From the proposed velocity field, the upper-bound extrusion load and the average extruded length are determined by minimizing the total power consumption with respect to four parameters. Experiments have been carried out with hard solder billets at room temperature. The theoretical predictions of the extrusion load are in good agreements with the experimental results and there is generally reason able agreement in average extruded length between theory and experiment.

• 한국기계가공학회지
• /
• 제15권3호
• /
• pp.58-65
• /
• 2016

This study analyzed the structural weld strength for a door hinge for a field artillery ammunition support vehicle. In order to determine the optimal conditions, we measured the modal analysis and analyzed the leg length of a rear door hinge. From these methods, we acquired the vibration frequency of normal mode and the optimal welding leg length conditions. It was possible to obtain a structural stability for a rear door hinge of the field artillery ammunition support vehicle. In the future, this should be used as a reference source for the weld strength analysis of high vibration and high weight structures for another welding system design.

• 전자공학회논문지D
• /
• 제35D권8호
• /
• pp.38-43
• /
• 1998

An analytical model for the surface field distribution of the RESURF (reduced surface field)LD(lateral double-diffused) MOS is presented in terms of the doping concentration, the thickness of the n epi layer, the p substrate concentration, and the epi layer length. The reuslts are used to determine the breakdown voltage due to the surface field as a function of the epi layer length. The maximum breakdown voltage of the device is found to be that of the vertical n$^{+}$n$^{[-10]}$ p$^{[-10]}$ junction. Analytical results of the breakdown voltage vs. the epi layer length agree well with the numerical simulation results using MEDICI.I.

• Journal of Biosystems Engineering
• /
• 제2권1호
• /
• pp.49-54
• /
• 1977

In order to obtain the field efficiency of the power tiller plowing on the various size of and its length-width field tests were performed with 8ps.10ps. power tiller popularly used in the korean rural area, and Satoh 5ps. made in Japan, Land Master 5ps. made in England were tested to compare with the field efficiency of the above power tillers. The results obtained in this tests were as follows ; 1. In considering of the resting time and the refueling time and others, the field efficiency of Satoh was the highest among the power tillers as to be 80%, at the 8ps. power tiller 76.5%, at the 10ps. power tiller 79.3% and the lowest field efficiency was obtained at the Land Master as 75.7%. 2. The field efficiency of the each power tiller increased as the ratio of the length to width of the field was increased. 3. The increasing rate of field efficiency was much bigger in the below the ratio of 5 : 1 but at the upper ratio increased above, the ratio was nearly constant. 4. The field efficiency of the power tiller was higher at the smaller power tiller than the larger, except the Land Master , because of easily operating and turning of the power tiller by virtue of its lighter weight.

• 수산해양기술연구
• /
• 제47권4호
• /
• pp.290-299
• /
• 2011

Field tests were carried out with five different mesh sizes (86.6, 101.0, 121.2, 137.7, 151.5mm) to study the relative efficiency of monofilament and multifilament gill net for Marbled sole, Pleuronectes yokohamae, in the western sea of Korea, 2007-2009. The relative efficiency was analyzed by length distribution, catch in number, catch in weight and weight per individual for Marbled sole. Statistical T-test was done to verify the efficiency between two gears. In the field tests, the total body length range, catch in number and weight of Marbled sole was 15.8-48.2cm, 728 and 254,939g, respectively. During the field tests, Marbled sole less than 15cm length which is prohibition size of fishing was not caught, but the caught number of Marbled sole less than 19.5cm length which is first maturity length was 13 (1.8%) and the caught number of Marbled sole more than 19.5cm was 715 (98.2%). Catches of monofilament gill net was average 1.4 times more efficient than multifilament gill net. The weight per individual and total length by mesh sizes in the two gears tended to gradually increase according to mesh size increasing. But there was little difference of weight per individual and total length by mesh sizes between two gears.