Browse > Article
http://dx.doi.org/10.14775/ksmpe.2016.15.3.058

Structural Weld Strength Analysis on Door Hinge of Field Artillery Ammunition Support Vehicle  

Kang, Hyeon-Je (Defense Agency for Technology and Quality)
Kim, Byeong-Ho (Defense Agency for Technology and Quality)
Kim, Byung-Hyun (Defense Agency for Technology and Quality)
Seo, Jae-Hyun (Defense Agency for Technology and Quality)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.15, no.3, 2016 , pp. 58-65 More about this Journal
Abstract
This study analyzed the structural weld strength for a door hinge for a field artillery ammunition support vehicle. In order to determine the optimal conditions, we measured the modal analysis and analyzed the leg length of a rear door hinge. From these methods, we acquired the vibration frequency of normal mode and the optimal welding leg length conditions. It was possible to obtain a structural stability for a rear door hinge of the field artillery ammunition support vehicle. In the future, this should be used as a reference source for the weld strength analysis of high vibration and high weight structures for another welding system design.
Keywords
Weld Strength; Door Hinge; Structural Stability; Leg Length;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Cho, J. U. and Han, M. S., "Structural Analysis on Door Hinge of Car", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 2, pp. 33-39, 2010.
2 Han, M. S. and Cho, J. U., "Study on Structural Analysis of Front Axle", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 5, pp. 65-71, 2011.
3 Kim, S. K. and Lee, J. W., "Analytical Study on the Structural Strength of an Air Compressor for Main Engine Starting of 22000 TEU Class Container Ships", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 5, pp. 60-67, 2015.   DOI
4 Ye, S. D. and Min, B. H., "A Study on the Development of Friction Hinge with Automatic Closed Function", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 1, pp. 107-114, 2014.   DOI
5 Jung, J. W, Kim, K. P, Ji, H. C. and Moon, T. S., "Design Improvement of the Driving Bevel Gear in Transmissions of a Tracked Vehicle", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 1-6, 2015.   DOI
6 Park, J. K. and Lee S. J., "A Study on the Contour Design in the Hinge Mechanism for a Folder of a Mobile Phone", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 25, No. 9, pp. 86-94, 2008.