• 한국작물학회지
• /
• 제32권4호
• /
• pp.436-442
• /
• 1987

수도의 화기구조개량을 통한 1대 잡종 품종의 종자 생산성향상을 목적으로 약장, 자약장의 재식밀도, 시비수준에 따른 환경변이와 유전양상을 검토하였다. 그 결과를 요약하면 다음과 같다. 1. 동일이삭내에서 약장은 1차 지복에 비해 2차 지경에서 길었다. 2. Z97B에서는 재식밀도가 낮을수록 약장, 자약장이 길어졌으나 IR43에서는 일정한 경향이 없었다. 3. 시비수준을 달리했을 때 약장에는 차이가 없었다. 4. IR56이 관여된 모든 교배조합 F$_1$ 에서 약장, 자약장의 일반조합능력, 특정 조합능력이 높았다. 5. IR56/IR 8의 F$_2$ 세대에서 체장의 유전분난양상은 장약이 열성인 연속변리를 보였고 자약장은 장자약가 초우성인 연적변리를 보였다. 6. 화기형질의 광의의 유전력은 체장 0.46, 광업장 0.88 이었다. 7. 약장과 자약장의 표현형상관과 유전상관은 각각 0.33, 0.44 정도였다.

• 한국전자거래학회지
• /
• 제9권1호
• /
• pp.209-220
• /
• 2004

If protocol has fast operations and short key length, it can be efficient user authentication protocol. Lenstra and Verheul proposed XTR. XTR have short key length and fast computing speed. Therefore, this can be used usefully in complex arithmetic. In this paper, to design efficient user authentication protocol we used a subgroup of Galois Field to problem domain. Proposed protocol does not use GF(p/sup 6/) that is existent finite field, and uses GF(p²) that is subgroup and solves problem. XTR-ElGamal based user authentication protocol reduced bit number that is required when exchange key by doing with upside. Also, proposed protocol provided easy calculation and execution by reducing required overhead when calculate. In this paper, we designed authentication protocol with y/sub i/ = g/sup b.p/sup 2(i-1)//ㆍv mol q, 1(equation omitted) 3 that is required to do user authentication.

• 대한방사선기술학회지:방사선기술과학
• /
• 제2권1호
• /
• pp.55-57
• /
• 1979

Author had an experiment on the size and density of the lung field by respiration methods in taking chest roentgenogram, and obtained the results as follows; 1. General density of chest film in full inhalation was higher than the other respiration methads. a. Apex length of the lung was $2.49{\pm}0.54cm$ in full inhalation, $2.30{\pm}0.53cm$ in normal respiration, and $1.97{\pm}0.58cm$ in full exhalation respectively. 3. Size of the lung in full inhalation was the largest as $21.95{\pm}1.83cm$ in length and $26.37{\pm}1.22cm$ in width.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권4호
• /
• pp.451-457
• /
• 1995

Most important study on development of high-Tc superconducting magnet is magnetic properties with design conditions To study optimal design condition of high-Tc superconducting magnet, small size solenoid magnet was designed and simulated. Design conditions are radius of bobbin, radius of magnet, length of magnet, critical cur-rent and notch size. We know that intensity of magnetic fields was controled by critical current and uniformity of magnetic fields was controled by notch size. The optimal design conditions to get the high intensity and uniformity of magnetic field in this experiments were radius of bobbin=3[cm], radius of magnetic=12[cm], length of Z=10[cm], notch size=6[cm] and critical current=12[A].

• The Journal of the Acoustical Society of Korea
• /
• 제21권3E호
• /
• pp.112-118
• /
• 2002

An unconstrained tuning fork with a 3-D model has been numerically analyzed by Finite Element Method (FEM) and Boundary Element Method (BEM). The first three natural frequencies were calculated by the FEM modal analysis. Then the trend of the change of the modal frequencies was examined with the variation of the tuning fork length and width. An formula for the natural frequencies-tuning fork length relationship were derived from the numerical analysis results. Finally the BEM was used for the sound pressure field calculation from the structural displacement data.

• 콘크리트학회논문집
• /
• 제12권3호
• /
• pp.3-10
• /
• 2000

In this study, we compared a plain mortar with the CAS-system shrinkage compensation mortar for Ondol that is Korean traditional heating system. The Ondol mortar is necessary to have properties as non-crack, fine flatness and stability for thermal changes. especially, mortar'crack prevention is to be most important property in Ondol mortar. To develope the stable material on the crack-prevention, we used to calcium-sulfo-aluminate(CSA)system in shrinkage compensation mortar. And so, we confirmed the effects of calcium-sulfo-aluminate(CSA) system for mortar's physical properties such as setting time, compressive strength and expansion ratio for crack prevention. The initial and final setting time of the CSA mortar is faster than plain mortar about 2hours. And, Compressive strength increased about 20% that plain mortar. The crack length per unit area, plain mortar is 0.426∼0.481m/m2. The Results of apartment construction field test, the shrinkage compensation mortar is excellent about the crack-reduce effect.

• 전자공학회논문지A
• /
• 제31A권12호
• /
• pp.100-105
• /
• 1994

SOI(Silicon-On-Insulator) pn 다이오드의 최적 수평길이($L_{dr}$)와 항복전압에 대한 해석적인 표현식을 n' 츠리프트 영역의 농도 및 두께, 매몰 산화막 두께의 함수로 유도하였다. 최적($L_{dr}$은 n'n접합의 수직 방향전계에 의한 항복전압과 n'np'접합으 수평방향 전계에 의한 항복전압이 같다는 조건으로부터 유도하였다. 해석적 표현식의 결과는 PISCESII를 사용한 시뮬레이션 결과와 잘 일치하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권3호
• /
• pp.206-209
• /
• 2006

This paper presents an analytical noise model for the drain thermal noise, the induced gate noise, and their correlation coefficient in deep-submicron MOSFETs, which is valid in both linear region and saturation region. The impedance field method was used to calculate the external drain thermal noise current. The effect of channel length modulation was included in the analytical equation. The noise behavior of MOSFETs with decreasing channel length was successfully predicted from our model.

• 소음진동
• /
• 제9권3호
• /
• pp.466-471
• /
• 1999

The prediction methods of diffraction field in barrier has beenreported much about the infinite length barrier and it is very few work that reasonable sound source was used in experiment. This study, however, has worked about the several model barrier with acoustic scale model experiment. In the case of scale model experiment, it is difficult to use the kind of source with sufficiently characteristics. A spark discharge sound source with the high repeatability, broad band spectra, small size and omnidirectivity has veen used for the prediction of diffraction field. Several model barriers with different length on the ground were considered for the experiment and compared with the the results calculated by the approximation.

• 대한교통학회지
• /
• 제9권1호
• /
• pp.47-56
• /
• 1991

With respect to stochastic delays at linked signals the solid quantitative information has not been available as yet. On the basis of field data the values of "I" (variance-mean ration of flow) were related with the rate of flow. The stochastic delays with specific "I" values were obtained from the distribution of overflow queue, which were calculated by the use of Markov chains. This examination of the results led to the derivation of a simple method for calculating stochastic dclays through the introduction of "I" into Miller's model. The good agreement was shown between the model and the field. The relationships between the cycle lengths and delays were examinated in a large number of conditions with regard to degree of saturation. signal split and link length. Within the practical range of cycle length uniform delays were dominant and no critical point was found in terms of minimum, delay. In highly saturated conditions however the weight of stochastic delay is noticeable.