• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.275-277
• /
• 2004

Fictitious notch radius approach is based on the Neuter's microstructural support hypothesis which assumes that fatigue crack is governed by highly stressed volume of the material right on the weld toe area rather than the surface stress at a pin point of weld toe area. Variety of successes have been achieved in applying this methodology to the fatigue of welded joint, hence, it became one of recommended design procedure in IIW's recommendation as well as many ship classification societies. 1mm fictitious notch radius approach was applied to the various fatigue problems of welded joints in this study covering the effect of weld size, notch stress calculation for 3D geometry and low cycle fatigue problem. It was found that fictitious notch radius approach fumed out to be very effective and accurate in dealing with fatigue strength of welded joint.

• Computers and Concrete
• /
• 제9권1호
• /
• pp.51-61
• /
• 2012

According to the results of three-point bending tests of rubberized concrete and plain concrete, the parameters such as total fracture energy ($G_F$), initial fracture energy ($G_f$), and tensile strength ($f_t$) are obtained for concrete material. Using ABAQUS software and a bilinear softening fictitious crack model, the crack propagation process was simulated and compared to the experimental results. It is found that the increase of AE hit count has a similar trend with the increase of energy dissipation in FEM simulation. For two types of concretes, both experimental results and numerical simulation indicate that the rubberized concrete has a better fracture resistance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.125-130
• /
• 2002

The most important material parameters are fracture energy and the stress-crack opening displacement($\sigma$-w) curve to determine the behavior of concrete. Especially, the relationship between the $\sigma$-w curve is strongly important to determine the load-displacement curve of concrete that has a major influence on the fracture behavior of a concrete. In this paper, notched plain concrete beams with different strength level were tested under three-point bending and fracture energy, the load-deflection curve, and the load-crack mouth opening displacement(CMOD) curve were obtained from the experimental data. Also, the fictitious crack model(FCM) was applied to determine the load-deflection curve of notched plain concrete beams using various types of $\sigma$-w curve model proposed by Petersson and we compared experimental results with numerical ones carried out by Finite Element Method(FEM).

• 한국강구조학회 논문집
• /
• 제12권2호통권45호
• /
• pp.221-230
• /
• 2000

자유단이 있는 비등방성 판의 안정성을 검토할 때, 기존의 해석적인 방법으로는 다양한 하중 조건 및 경계조건에 대해 좌굴하중 및 좌굴모드를 구할 수 없다. 이러한 단점을 해결하기 위해 수치해석 기법인 유한차분법을 사용하였다. 유한차분법을 적용할 때, 자유경계의 가상점 처리가 가장 난해하게 되므로 1변이 자유이고 3변이 고정인 경우와 마주보는 2변이 자유이고 다른 2변이 고정인 경우를 해석 모델로 삼아 좌굴해석을 수행하였다. 본 논문에서는 자유경계를 갖는 비등방성 판의 해석 기법으로 유한차분법을 제시하였으며, 다양한 수치해석을 통하여 자유경계의 좌굴하중 및 모드 특성을 규명하였다.

• 한국음향학회지
• /
• 제31권1호
• /
• pp.19-28
• /
• 2012

Kirchhoff 적분식을 이용하여 외부 음향 문제의 시간 영역 응답을 계산하는 경우, 주파수영역 해석과 마찬가지로 가상적인 내부 음향 모드에 기인한 비유일성 문제가 발생한다. 이를 해결하는 방법들 중의 하나로서 CHIEF(Combined Helmholtz Integral Equation Formulation) 방법이 쓰이는데, 이는 몇몇 내부 수음점의 응답을 0으로 추가하여 구속하는 조건을 부가하는 기법이다. 이 기법은 주파수 영역 경계요소법에서는 간편한 수식 때문에 많이 사용되고 있지만, 시간 영역에서는 사용된 예가 없다. 본 연구에서는 대상체 내부의 가상 수음점과 경계 표면의 절점들간의 최소 거리에 대한 지연시간을 고려하여, 계산하고자 하는 미지수인 현재 시간의 경계 표면 음장을 구속함으로써, 시간 영역 해석에 적합하도록 CHIEF 방법을 수식화하였다. 예제로서, 반지름 방향으로 진동하는 구의 음향 방사 문제를 다루었다. CHIEF 방법을 적용함에 따라 저차의 내부 음향 모드에 기인한 비유일성 문제를 해결할 수 있었고, 비요동 모드에 의한 수치적 불안정성을 피할 수 있었다. 그러나, 유효주파수 밖에 남은 내부 음향의 고차모드들에 의한 수치적 불안정성은 증가하였다.

• Computers and Concrete
• /
• 제9권1호
• /
• pp.1-19
• /
• 2012

The size-effect study of various fracture parameters obtained from two parameter fracture model, effective crack model, double-K fracture model and double-G fracture model is presented in the paper. Fictitious crack model (FCM) for three-point bend test geometry for cracked concrete beam of laboratory size range 100-400 mm is developed and the different fracture parameters from size effect model, effective crack model, double-K fracture model and double-G fracture model are evaluated using the input data obtained from FCM. In addition, the fracture parameters of two parameter fracture model are obtained using the mathematical coefficients available in literature. From the study it is concluded that the fracture parameters obtained from various nonlinear fracture models including the double-K and double-G fracture models are influenced by the specimen size. These fracture parameters maintain some definite interrelationship depending upon the specimen size and relative size of initial notch length.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.530-532
• /
• 2001

This paper illustrates a method for evaluating nodal probabilistic production cost using the CMELDC. A new method for constructing CMELDC(the equivalent load duration curves of composite power system) was developed by authors. The CMELDC can be obtained by convolution integral processing between the probability distribution functions of the fictitious generators outage capacity and the load duration curves at each load point. Monte Carlo Methods are applied for the construction of CMELDC on this study. And IEEE-RTS 24 buses model is used as our case study with satisfactory results.

• 한국식품과학회지
• /
• 제27권2호
• /
• pp.164-169
• /
• 1995

퍼지 이론을 적용하여 압출성형공정을 제어하는 모의실험을 수행하였다. 압출물의 두께(팽화율)가 측정변수로 피드백 입력되고 퍼지제어기를 통하여 스크류 회전속도의 set point가 출력되었다. 얻어진 set point로 가상의 압출성형기가 작동하여 또 다른 두께값이 측정값으로 입력되었다. 이와같은 일련의 과정이 반복되면서 최종적으로 원하는 두께값을 얻을 수 있었고 피지제어기의 알고리즘은 압출성형 전문가로부터 얻어진 기본 법칙을 이용하여 작성 하였다.

• Advances in concrete construction
• /
• 제2권3호
• /
• pp.229-247
• /
• 2014

A numerical study of the influence of shear-span/depth ratio on the cohesive crack fracture parameters and double - K fracture parameters of concrete is carried out in this paper. For the study the standard bending specimen geometry loaded with four point bending test is used. For four point loading, the shear - span/depth ratio is varied as 0.4, 1 and 1.75 and the ao/D ratio is varied from 0.2, 0.3 and 0.4 for laboratory specimens having size range from 100 - 500 mm. The input parameters for determining the double - K fracture parameters are taken from the developed fictitious crack model. It is found that the cohesive crack fracture parameters are independent of shear-span/depth ratio. Further, the unstable fracture toughness of double-K fracture model is independent of shear-span/depth ratio whereas, the initial cracking toughness of the material is dependent on the shear-span/depth ratio.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권9호
• /
• pp.425-432
• /
• 2002

This Paper illustrates a method for evaluating nodal probabilistic production cost using the CMELDC. A new method for constructing CMELDC(CoMposite Power System Equivalent Load Duration Curve) has been developed by authors. The CMELDC can be obtained by convolution integral processing between the probability distribution functions of the fictitious generators outage capacity and the load duration curves at each load point. In general, if complex operating conditions are involved and/or the number of severe events is relatively large, Monte Carlo methods are more efficient. Because of that reason, Monte Carlo Methods are applied for the construction of CMELDC in this study. And IEEE-RTS 24 buses model is used as our case study with satisfactory results.