• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.187-191
• /
• 2001

In the paper, an approach to the development of the selective catalytic reduction process of NOx is presented. The reduction process can be efficiently controlled using a conventional combination of feed-forward and feed-back control structures. The aim of this paper is to test and verify an approach to the SCR process which is based on an industrial pilot plant of combustion and nitric oxide formation. The systems are based on measurements of a NOx removal ratio and the fuel flow rate, and NH$_3$slip which are usually available as a part of de-NOx control system.

• 제어로봇시스템학회논문지
• /
• 제18권2호
• /
• pp.87-93
• /
• 2012

In this paper, a formation guidance method for UAVs (Unmanned Aerial Vehicles) to simulate the formation flight of birds proposed. The proposed method solves all issues of approaching for formation, formation keeping, and scarce chance to be collided with each UAV during formation process. Also, we design the feedforward controller to compensate the change of speed and heading for maneuvering of the leader UAV and the feedback controller to consider the response lag of the system. The stability and performance of the proposed controller is verified via numerical simulations of the full 6-Dof model of UAV.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.525-529
• /
• 2001

A pulse frequency control(PFM) method for single-phase SEPIC-type rectifier is described in this paper. In the SEPIC rectifier, a relationship between the output power and the respective switching frequency is investigated to establish the control scheme of PFM. The propsed control method is provided with a feed-forward control loop of the output load as well as a feed-back control loop of the output voltage. The simulation results show good dynamic responses and unity power-factor operation.

• 한국시뮬레이션학회논문지
• /
• 제11권1호
• /
• pp.59-70
• /
• 2002

This article presents the results of research to develop a descriptive model of firm-level productivity that will allow a myriad of factor interactions to be directly accounted for. The model is a linked set of equations that attempt to capture how changes in one-factor influences the level of another factor. and ultimately bottom-line performance. The model is coded in SIMAN. It is used to determine the best use of an infusion of funds should they go for additional automation, or training etc. An application of the model to U.S. industry is presented based on parameter values obtained through a national survey.

• 정보학연구
• /
• 제8권1호
• /
• pp.51-56
• /
• 2005

The Back propagation algorithm is a very effective supervised training method for multi-layer feed forward neural networks. This paper studies the decision boundary formation based on the Back propagation algorithm. The discriminating powers of several neural network topology are also investigated against five manually created data sets. It is found that neural networks with multiple hidden layer perform better than single hidden layer.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.193-199
• /
• 1997

Until now, environmental problem has become more and more serious, and acoustic noise is one of environmental pollutions. For many years, ANC(Active Noise Control) has been made to reduce this noise. In this paper, active silencer using switching method is studied. This silencer is composed of single-phase full bridge inverter to drive cancelling loudspeaker. The inverter is controlled to reduce noise by ramp comparison control method. At the vacuum cleaner, noise control with FFCS(Feed-Forward Control Structure) is applied and geometric arrangement is replaced to avoid unstability of FFCS.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.269-275
• /
• 1997

This paper presents real time digital signal processor(DSP) control of UPS system feeding processor(DSP) control of UPS system feeding nonlinear loads to provide sinusoidal inverter output voltage. The control scheme is composed of an rms voltage compensator, the load current harmonics feed-forward loop for the cancellation of output voltage harmonics, and the output voltage harmonics feedback loop for system stability. The controller employs a Texas Instruments TMS320C40GFL50 DSP.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권1호
• /
• pp.112-118
• /
• 2000

A modified repetitive control is formulated and analyzed in the discrete-time domain. Sufficient conditions for the stability of a class of repetitive controllers are given by means of the regeneration spectrum method. When a periodic signal input is drived into the two-mass-spring plant, the performance of the proposed controller which comprises a low-pass filter and two feed-forward compensators, turns out highly accurate by comparing the tracking result from the conventional LQ controller.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.427-428
• /
• 2013

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.560-563
• /
• 2000

In this paper we proposed AC/DC boost converter to improve input current harmonic reduction in TIG welder. The proposed harmonic reduction circuit with UC2854AN acting on constant switching frequency average current control has a three-loop control structure : the inner current loop the line voltage feed-forward loop and th outer voltage loop. Also we applied the constant current strategy on full bridge IGBT inverter to stabilized the output current using the analog PI controller. To demonstrate the practical significance of the proposed methods some simulation studies and experimental results are presented.