• 대한기계학회논문집A
• /
• 제36권3호
• /
• pp.347-353
• /
• 2012

최근 휴대폰은 스마트폰의 출연으로 다기능화가 요구되고 있으며, 각 보드의 전기적 신호를 연결시키는 커넥터는 필수 핵심 부품이 되었다. 커넥터는 많은 양의 전기신호를 처리하기 때문에 소형화, 협피치화가 필요하다. 하지만, 커넥터의 소형화 및 협피치화는 구조적 안전성을 저하시키며, 외부하중에 의한 접촉불량을 발생시킨다. 따라서 본 논문에서는 초소형 협피치 FPC 커넥터를 개발하기 위해 벤치마킹을 통한 초기설계안을 도출하였으며, 터미널 두께 0.2mm, 개수 50 개를 기준으로 하였다. 체결성능을 평가하기 위해 수치해석 모델을 구성하였으며, 다구찌 방법을 이용하여 형상 최적화를 수행하였다. 또한, 터미널의 한계수명을 예측하기 위해 피로해석을 수행하였으며, 체결 성능이 향상된 최종형상을 도출하였다.

• 한국해양공학회지
• /
• 제20권6호
• /
• pp.123-129
• /
• 2006

The mechanical properties of bellows, such as the extensibility and the strength can be changed depending on the shape. For the shipbuilding material, it is desirable that the fatigue life is long due to the elastic property and the reduction of thermal stress in piping system. Nowadays, the domestic production and design of bellows are based on the E.J.M.A. Code. Therefore, the design standard is in need because of much errors and lack of detailed analysis. In this study, it is attempted to find out the optimal shape of U-type bellows using the finite element analysis. The design factors, mountain height, length, thickness, and the number of convolutions are considered and the proper values are chosen for the simulation. The results shaw that as the number of convolutions reduces, the volume decreases while the stress increases. However, as the number of convolutions increases, the volume increases above the standard volume and the stress obviously increases. In addition, the effect of the thickness of bellows on the stress is very large. Both of the mass and stress are decreasing at a certain lower value region. Also, we investigated shape optimization with considering maximum stress distribution tendency.

• 한국전산구조공학회논문집
• /
• 제31권2호
• /
• pp.97-104
• /
• 2018

본 논문에서는 페이즈필드 설계법 기반의 피로 제약 조건 구조물의 위상최적설계를 수행하였다. 페이즈필드 설계법의 도입으로 기존의 위상최적설계법에서 발생하기 쉬운 중간 영역의 크기를 크게 감소시켰다. 수정된 upper bound P-norm의 도입으로 모든 지점의 응력 성분을 고려하면서, 전역적 응력값이 국부적 최대 응력값과 근사한 값을 가질 수 있도록 설정하였다. 또한 기존의 피로 파괴 제약 조건 위상최적설계에서 다루지 않았던 응력 수정 계수에 대한 고려를 위하여 위상최적설계 결과물의 1차 주응력 성분을 고려하여 응력 수정 계수를 도입하고 이에 따라 허용 응력 진폭 값을 수정 하였다. 이를 통하여 인장 응력으로 인한 내구 한도 감소 요인을 반영한 체계적인 설계 방안을 제시하였다.

• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.109-121
• /
• 2004

This paper presents an optimal design method for structure-borne durability of a vehicle body structure. Structure-borne durability design requires a new design that can increase fatigue lives of critical areas in a structure and must prohibit transition phenomenon of critical areas that results from modification of the structure at the same time. Therefore, the optimization problem fur structure-borne durability design are consists of an objective function and design constraints of 2 types; type 1-constraint that increases fatigue lives of the critical areas to the required design limits and type 2-constraint that prohibits transition phenomenon of critical areas. The durability design problem is generally dynamic because a designer must consider the dynamic behavior such as fatigue analyses according to the structure modification during the optimal design process. This design scheme, however, requires such high computational cost that the design method cannot be applicable. For the purpose of efficiency of the durability design, we presents a method which carry out the equivalent static design problem instead of the dynamic one. In the proposed method, dynamic design constraints for fatigue life, are replaced to the equivalent static design constraints for stress/strain coefficients. The equivalent static design constraints are computed from static or eigen-value analyses. We carry out an optimal design for structure-borne durability of the newly developed bus and verify the effectiveness of the proposed method by examination of the result.

• 대한기계학회논문집A
• /
• 제38권4호
• /
• pp.379-384
• /
• 2014

가스터빈엔진의 가장 핵심 부품인 디스크와 블레이드는 고온, 고압축비, 고속 회전이라는 가혹한 환경에서 지속적으로 운용된다. 이러한 가혹한 환경과 디스크와 블레이드가 가지는 큰 회전 에너지로 인해 디스크 및 블레이드에 의해 유발되는 파손은 항공기 손상 혹은 탑승자의 피해로 이어지는 재해적 고장 혹은 한계 고장으로 이어진다. 그러므로 디스크와 블레이드의 구조적 건전성의 마진을 충분히 확보하기 위해서 본 연구에서는 디스크의 취약 부위인 도브테일의 형상을 최적화하고, 그 해의 강건성을 확인하기 위해 치수 공차와 피로 수명의 산포와 같은 불확실성에 대하여 신뢰도 해석을 수행하고자 한다. 이 결과를 통해 결정론적 방법인 최적설계의 필요성과 함께 한계를 확인하고, 향후 신뢰도 기반 최적설계의 필요성을 인지하고자 한다. 이를 위해 비선형 열-구조 연성해석과 접촉 해석을 포함한 유한요소해석을 수행하였다.

• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1080-1086
• /
• 2005

The preliminary design optimization of multi-stage spur gear reduction units has been a subject of considerable interest, since many high-performance power transmission applications (e.g., automotive and aerospace) require high-performance gear reduction units. There are multiple objectives in the optimal design of multi-stage spur gear reduction unit, such as minimizing the volume and maximizing the surface fatigue life. It is reasonable to formulate the design of spur gear reduction unit as a multi-objective optimization problem, and find an appropriate approach to solve it. In this paper an interactive physical programming approach is developed to place physical programming into an interactive framework in a natural way. Class functions, which are used to represent the designer's preferences on design objectives, are fixed during the interactive physical programming procedure. After a Pareto solution is generated, a preference offset is added into the class function of each objective based on whether the designer would like to improve this objective or sacrifice the objective so as to improve other objectives. The preference offsets are adjusted during the interactive physical programming procedure, and an optimal solution that satisfies the designer's preferences is supposed to be obtained by the end of the procedure. An optimization problem of three-stage spur gear reduction unit is given to illustrate the effectiveness of the proposed approach.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.246-255
• /
• 2016

When spring of the suspension is exerted by an external load, a car should be designed to prevent predictable damages and designed for a ride comfort. We used experiments design to design VON-MISES STRESS and K, a constant, of spring of suspension which is installed in a car as a goal level. We analyzed the result from Edison's Elastic - Plastic Analysis SW(CSD_EPLAST) by setting D, d, n as external diameter of coil, internal diameter of coil, the number of total coil respectively. The experiment design let the outcome be as Full-second order by using Box-Behnken which is one of response surface methods. Experimented and analyzed results based on the established experiments design, We found out design parameter which has desired VON-MISES STRESS and the constant K. Additionally, we predicted life time of when the external load was exerted by repeated load by using fatigue equation, and verification of plastic deformation has also been made. Additionally we interpreted a model, which is formed by optimized design parameter, with linear analysis and non-linear analysis, at the same time we also analyzed plastic deformation with the values from the both models. Finally, we predicted fatigue life of optimized model by using fatigue estimation theory and also evaluated a ride comfort with oscillation analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.389-394
• /
• 2003

In this paper, a shape optimization technique is applied to design of an air-conditioner mounting bracket. The mounting bracket is a structural component of an engine, on which bolts attach an air-conditioner compressor. The air-conditioner mounting bracket has a large portion of weight among the engine components. To reduce weight of the bracket, the shape is optimized using a finite element software. The compressor assembly, composed of a compressor and a bracket is modeled using finite elements. An objective function for the shape optimization of the bracket is the weight of the bracket. Two design constraints on the bracket are the first resonant frequency of the compressor assembly and the fatigue life of the bracket. The design variables are the shape of the bracket including thickness profiles of the front and back surfaces of the bracket, radius of outer bolt-holes, and side edge profiles. The coordinates of the FE nodes control the shape parameters. Optimal shapes of the bracket are obtained by using SOL200 of MSC/NASTRAN.

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.58-63
• /
• 2005

In order to minimize weight of vehicle seat, an optimum design of aluminum seat is presented while satisfying stress and fatigue life constraints. In this study, the analysis model is validated by comparing it's stress with that of test. Then, two-level orthogonal array is used to estimate the design sensitivity for 7 design variables. Finally, the sequential approximate optimization (SAO) is performed using the constructed RSM models. The approximate RSM models are sequentially updated using the analysis results corresponding to the approximate optimum obtained during the SAO. After 14 analyses, the SAO gives an optimal design that can reduce 16.7$\%$ of weight while increasing 369$\%$ of fatigue life and satisfying stress constraint.

• 한국자동차공학회논문집
• /
• 제15권2호
• /
• pp.81-86
• /
• 2007

We suggest a design method for reducing the number of spot welds in the vehicle body in terms of durability. To reduce the number of spot welds, we use the DOE(Design of Experiments) analysis with two influence indices for the durability and the fatigue life of a spot weld itself. Through the suggested design method, we select spot welds that could be removed without serious reduction of durability of the whole model. We apply this new methodology to the BIW(Body In White) model of a vehicle by choosing some practical parts where durability-related point of view must be considered importantly by experience.