• Journal of the Chungcheong Mathematical Society
• /
• v.23 no.4
• /
• pp.609-616
• /
• 2010

We characterize extreme rays of the cone $\mathbb{T}$ of all positive semi-definite block matrices whose partial transposes are also positive semi-definite. We also construct an algorithm checking whether a given PPTES generates an extreme ray in the cone $\mathbb{T}$ or not. Using this algorithm, we give an example of $4{\otimes}4$ PPT entangle state of the type (5, 5), which generates extreme ray of the cone $\mathbb{T}$.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.506-511
• /
• 1998

In this paper we consider multiobjective linear programming problems with coefficients of the objective functions specified by possibility distributions. Possibly and necessarily efficient solution sets are defined as funny solution sets whose membership grades represent possibility and necessity degrees to which a feasible solution is efficient. Considering efficiency condition and its dual condition in ordinary multiobjective linear programming problem, we propose efficiency test methods based on an extreme ray generation method. Since the proposed methods can be put in the part of a bi-section method, we can develop calculation and methods of the degree of possible and necessary efficiency for feasible solutions.

• Journal of the Optical Society of Korea
• /
• v.17 no.1
• /
• pp.38-43
• /
• 2013

In this study, we propose a simple and indirect method to determine the optical constants of Mo and ITO thin films in the extreme ultraviolet (EUV) wavelength region by using X-ray reflectometry (XRR) and Rutherford backscattering spectrometry (RBS). Mo and ITO films were deposited on silicon substrates by using an RF magnetron sputtering method. The density and the composition of the deposited films were evaluated from the XRR and RBS analysis, respectively and then the optical constants of the Mo and ITO films were determined by an indirect optical method. The results suggest that the indirect method by using the XRR and RBS analysis will be useful to search for suitable high absorbing EUVL mask material quickly.

• Journal of Korean Neurosurgical Society
• /
• v.45 no.6
• /
• pp.378-380
• /
• 2009

Osteoporotic patients who undergo percutaneous vertebroplasty (PVP) have the risk of a repeated collapse of their adjacent vertebral body due to alteration of load transfer into the adjacent vertebral body. The authors have experienced a rare case of repeated osteoporotic vertebral compression fractures (VCF) resulting in extreme multi-level PVP. A 74-year-old female developed severe back pain after slipping down one month ago. Her X-ray and MR images indicated a T11 VCF. She underwent successful PVP with polymethylmethacrylate (PMMA). Two weeks later, she returned to our hospital due to a similar back pain. Repeated X-ray and MR images showed an adjacent VCF on T12. A retrial of PVP was performed on T12, which provided immediate pain relief. Since then, repeated collapses of the vertebral body occurred 12 times in 13 levels within a 24-month period. Each time the woman was admitted to our hospital, she was diagnosed of newly developed VCFs and underwent repeated PVPs with PMMA, which finally eased back pain. Based on our experience with this patient, repeated multiple PVP is not dangerous because its few and minor complications. Therefore, repeated PVP can serve as an effective treatment modality for extreme-multi level VCFs.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.9
• /
• pp.45-55
• /
• 2020

X-ray computed tomography (CT) is very useful for the quantitative evaluation of internal structures, particularly defects in rock samples, such as pores and fractures. In situ CT allows 3D imaging of a sample subjected to various external treatments such as loading and therefore enables observation of changes that occur during the loading process. We reviewed state-of-the-art of in situ CT applications for geomaterials. Two triaxial cells made using relatively low density but high strength materials were developed aimed at in situ CT scanning during hydro-mechanical laboratory testing of rocks. Preliminary results for in situ CT imaging of granite and sandstone samples with diameters ranging from 25 mm to 50 mm show a resolution range of 34~105 ㎛ per pixel pitch, indicating the feasibility of in situ CT observations for internal structural changes in rocks at the micrometer scale. Potassium iodide solution was found to improve the image contrast, and can be used as an injection fluid for hydro-mechanical testing combined with in situ CT scanning.

• Journal of The Korean Astronomical Society
• /
• v.37 no.5
• /
• pp.433-438
• /
• 2004

Clusters of galaxies generally form by the gravitational merger of smaller clusters and groups. Major cluster mergers are the most energetic events in the Universe since the Big Bang. The basic properties of cluster mergers and their effects are discussed. Mergers drive shocks into the intracluster gas, and these shocks heat the intracluster gas. As a result of the impulsive heating and compression associated with mergers, there is a large transient increase in the X-ray luminosities and temperatures of merging clusters. These merger boost can affect X-ray surveys of clusters and their cosmological interpretation. Similar boosts occur in the strong lensing cross-sections and Sunyaev-Zeldovich effect in merging clusters. Merger shock and turbulence associated with mergers should also (re)accelerate nonthermal relativistic particles. As a result of particle acceleration in shocks and turbulent acceleration following mergers, clusters of galaxies should contain very large populations of relativistic electrons and ions. Observations and models for the radio, extreme ultraviolet, hard X-ray, and gamma-ray emission from nonthermal particles accelerated in these shocks will also be described. Gamma-ray observations with GLAST seem particularly promising.

• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.42-46
• /
• 2016

In LCD Display or semiconductor manufacturing processes, the anti-static technology of glass substrates and wafers becomes one of the most difficult issues which influence the yield of the semiconductor manufacturing. In order to overcome the problems of wafer surface contamination various issues such as ionization in decompressed vacuum and inactive gas(i.e. $N_2$ gas, Ar gas, etc.) environment should be considered. Soft X ray radiation is adequate in air and $O_2$ gas at atmospheric pressure while UV radiation is effective in $N_2$ gas Ar gas and at reduced pressure. At this point of view, the "vacuum ultraviolet ray ionization" is one of the most suitable methods for static elimination. The vacuum ultraviolet can be categorized according to a short wavelength whose value is from 100nm to 200nm. this is also called as an Extreme Ultraviolet. Most of these vacuum ultraviolet is absorbed in various substances including the air in the atmosphere. It is absorbed substances become to transit or expose the electrons, then the ionization is initially activated. In this study, static eliminator based on the vacuum ultraviolet ray under the above mentioned environment was tested and the results show how the ionization performance based on vacuum ultraviolet ray can be optimized. These vacuum ultraviolet ray performs better in extreme atmosphere than an ordinary atmospheric environment. Neutralization capability, therefore, shows its maximum value at $10^{-1}{\sim}10^{-3}$ Torr pressure level, and than starts degrading as pressure is gradually reduced. Neutralization capability at this peak point is higher than that at reduced pressure about $10^4$ times on the atmospheric pressure and by about $10^3$ times on the inactive gas. The introductions of these technology make it possible to perfectly overcome problems caused by static electricity and to manufacture ULSI devices and LCD with high reliability.

• Composites Research
• /
• v.28 no.5
• /
• pp.270-276
• /
• 2015

Polyvinylidene fluoride (PVDF)-based nanocomposites are fabricated by incorporation of boron nitride (BN) nanosheets with anisotropic orientation for a potential high thermal conducting ferroelectric materials. The PVDF is dissolved in dimethylformamide (DMF) and homogeneously mixed with exfoliated BN nanosheets, which is then cast into a polyimide film under application of high magnetic fields (0.45~10 T), where the direction of the filler alignment was controlled. The BN nanosheets are exfoliated by a mixed way of solvothermal method and ultrasonication prior to incorporation into the PVDF-based polymer suspension. X-ray diffraction, scanning electron microscope and thermal diffusivity are measured for the characterization of the polymer nanocomposites. Analysis shows that BN nanosheets are exfoliated into the fewer layers, whose basal planes are oriented either perpendicular or parallel to the composite surfaces without necessitating the surface modification induced by high magnetic fields. Moreover, the nanocomposites show a dramatic thermal diffusivity enhancement of 1056% by BN nanosheets with perpendicular orientation in comparison with the pristine PVDF at 10 vol % of BN, which relies on the degree of filler orientation. The mechanism for the magnetic field-induced orientation of BN and enhancement of thermal property of PVDF-based composites by the BN assembly are elucidated.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.66.1-66.1
• /
• 2017

Nuclear reactions in explosive stars such as novae, X-ray bursts, and supernovae are responsible for producing many of the elements that make up our world. Exotic nuclei not normally found on earth can play an important role in these events due to the extreme conditions that occur in the explosion. A frontier area of research involves utilizing beams of radioactive nuclei to improve our understanding of these explosions and the implications on cosmic element production. At the future radioactive ion beam facility of Korea, RAON, we will measure astrophysically important reactions using exotic beams to probe the details of cosmic events. Details of RAON and possible day-1 experiments at the facility will be presented.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.95-95
• /
• 2014

The mass measurement of neutron stars or black holes is of fundamental importance in our understanding of the evolution of massive stars and core-collapse supernova explosions as well as some exotic physics of the extreme conditions. Despite the importance, however, it's very difficult to measure mass of these objects directly. One way to do this, if they are in binary systems, to measure their binary motions (i.e., Doppler shifts) which can give us direct information on their mass. Recently many new highly-obscured massive X-ray binaries have been discovered by new hard X-ray satellites such as INTEGRAL and NuSTAR. The new highly-obscured massive X-ray binaries are faint in the optical, but bright in the infrared with many emission lines. Based on the near-infrared spectroscopy, one can first understand the nature of stellar companions to the compact objects, determining its spectral types and luminosity classes as well as mass losses and conditions of (potential) circumstellar material. Next, spectroscopic monitoring of these objects can be used to estimate the mass of compact objects via measuring the Doppler shifts of the lines. For the former, broad-band spectroscopy is essential; for the latter, high-resolution spectroscopy is critical. Therefore, IGRINS appears to be an ideal instrument to study them. An IGRINS survey of these new highly-obscured massive X-ray binaries can give us a rare opportunity to carry out population analyses for understanding the evolution of massive binary systems and formation of compact objects and their mass ranges. In this talk, we will present a sample near-infrared high resolution spectra of HMXB, IGR J19140+0951 and discuss about its spectral feature. These spectra are obtained on 13th July, 2014 from IGRINS commissioning run at McDonald 2.7m telescope. And at final, we will introduce the upgrade plan of IGRINS Operation Software (IGOS), to gather the input from IGRINS observer.