• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.696-698
• /
• 2000

A new high voltage generator is designed and basic performance analysis by 2D-FEA is performed. The new generator is able to supply electricity directly to the high voltage grid without the need for a step-up transformer. For the 2D-FEA analysis, the generator model is coupled to external circuit components with inductance and end-winding resistance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.2
• /
• pp.124-132
• /
• 1987

In this paper, a new Open and Closed Loop Alternation(OCLA) frequency synthesizer is developed to eliminate a frequency error occurring in the transition state of a frequency hopping. This frequency synthesizer consists of a phase comparator(PC), two low pass filters(LPF), two voltage controlled oscillators(VCO), switching elements, a programmable divider and frequency hopping controller, and the stabilized output frequency can be obtained by switching performance. In addigion, it can be found that the characteristic of its circuit construction makes it easy to attach an external circuitry to the open loop.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.401-404
• /
• 2006

A new log-domain first-order multifunction filter is proposed in this letter. The proposed filter is systematically derived using the state-space synthesis procedure from a corresponding block diagram. It provides low-pass (LP), high-pass (HP), and all-pass (AP) responses simultaneously for a single input signal. The filter circuit has a very simple structure since it uses only bipolar junction transistors (BJTs) and a grounded capacitor. It can be electronically tuned by changing an external current. The filter has a greater bandwidth due to its inherent current-mode and log-domain operations. PSPICE simulations are given to confirm the theoretical analysis.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.3
• /
• pp.390-396
• /
• 2015

This paper proposes a method to reduce flicker when running an AC-power direct-drive type multiple string LED driver IC. The proposed method greatly decreases flicker using one capacitor and P-type MOSFET transistor (PMOS). The flicker index (FI) was reduced by over 40% through experiments, and less than half of the conventional external components are used in the passive valley fill circuit, which gives an advantage in the cost and utilization in the design of LED lighting modules. The 0.35 um 700 V BCD process was used to manufacture this LED driver.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.1
• /
• pp.59-64
• /
• 2011

A low noise and low power RF front-end for 5.8 GHz DSRC (Dedicated Short Range Communication) receiver is presented. The RF front-end is composed of a single-to-differential two-stage LNA and a Gilbert down-conversion mixer. In order to remove an external balun and 5.8 GHz LC load tuning circuit, a single-to-differential LNA with capacitive cross coupled pair is proposed. The RF front-end is fabricated in a 0.13 ${\mu}m$ CMOS process and draws 7.3 mA from a 1.2 V supply voltage. It shows a voltage gain of 40 dB and a noise figure (NF) lower than 4.5 dB over the entire DSRC band.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.4
• /
• pp.67-71
• /
• 2015

Product of technology developed in this study is an external interface for controlling the equipment of pendant key remote control system circuit board, and it is used in the electronic component test equipment system. Main control system module is in the role as a device for controlling the various control devices that make up the integrated system for microscopic examination at the request of the host computer engineers to control the inspection equipment. The pentane-key interface module to its role as a device for controlling the various control devices that make up the integrated system for microscopic examination at the request of the host computer for the engineer to control the inspection equipment. Development of the control system can be expected in the configuration of a system for efficient and accurate inspection of high-precision parts.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.832-837
• /
• 2006

ATC facility manipulates ground-on-board information, which transmits speed limit, varying as wayside environments - safety facility, track gradient, inclination, bridge and tunnel and other factors, installed for safe operation of trains on wayside. Efficientiation and automatification of operation and maintenance is being realized, by measuring if there are any erroneous information, using a measuring car. In this paper, we study in priority the methods for measuring accurately distinctive properties of internal malfunctions of track circuits, the performance decrease of condensers, and the unbalance of return cables, which are actually required for functionality improvement of high-speed line signal measure facilities, by measuring the unbalance of return current given because of damaged factors of external track circuits.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.3
• /
• pp.273-280
• /
• 1990

To prevent the shoot-through phenomena in a PWM inverter, a short dead time is usually provided between a pair of switching transistors in the same leg of the inverter. In this approach, the amount of the dead time is designed to meet the worst case condition of the inverter transistors and the base drive elements. So, in normal cases, relatively large portion of the dead time is unnecessary and it results in an undesirablecurrent waveform distortion and generates ripple torque on the motor shaft. In this paper, a new base drive method to remove the undesirable portion of the dead time is described. The method senses the transistor on/off states to interlock the other transistor of the leg without the external dead time. Also, for the transistors of large current rating, the Darlington drive circuit is combined to the proposed method and is tested to verify the effectiveness. The experimental results of the proposed method are described and compared with those of the conventional dead time method.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1515-1516
• /
• 2006

The low luminous efficacy is one of the major demerits of plasma display panel (PDP). In this work we propose the new driving method for high efficiency AC-PDP and analyze its discharge characteristics. The suggested method can control the effective capacitance of panel by external circuit. As a result of the new suggested method, the current becomes less and the discharge time becomes long, because of voltage distribution between panel and auxiliary capacitor. So this method can decrease the power consumption much more than that of the conventional driving method.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1304-1306
• /
• 1996

A regenerative signal amplifying gate driver of self-excited electronic ballast is presented. It can be used for high pressure sodium (HPS) lamp without auxiliary external ignitor. Since the HPS lamp requires very high ignition voltage at start up, the resonant frequency of the circuit must be increased to obtain high voltage oscillations in spite of relatively small resonant current. The presented gate driver amplifies the current of gate drive transformer and raises the gate-source voltage Quickly to turn on the MOSFET switches. Hence, the resonant frequency can be increased more than 100kHz. The HPS lamp used in the simulation and experiment has the rating of 400W input power at 220V input ac voltage source. The experiments show that the resonant frequency is above 150kHz at start up.