• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.8 s.111
• /
• pp.788-794
• /
• 2006

In this paper, a Sommerfeld integral for an impedance half-plane is considered, which is one of classical problems in electromagnetic theory. First, the integral is evaluated into two series representations which are expressed in terms of exponential integral and Lommel function, respectively. Then based on the Lommel function expansion, an exact, closed-form expression of the integral is formulated, written in terms of incomplete Weber integrals. Additionally, based on the exponential integral expansion, an approximate expression of the integral is obtained. Validity of all formulations derived in this paper is demonstrated through comparisons with a numerical integration of the integral for various situations.

• Communications of the Korean Mathematical Society
• /
• v.34 no.2
• /
• pp.383-390
• /
• 2019

In this paper, we discuss special polynomials involving exponential distribution, which is related to life testing. We derive some identities of special polynomials such as the symmetric property, recurrence formula and so on. In addition, we investigate explicit properties of special polynomials by using their derivative and integral.

• Honam Mathematical Journal
• /
• v.39 no.1
• /
• pp.49-59
• /
• 2017

In this paper, a generalization of the exponential integral is given. As a consequence, several inequalities involving the generalized function are derived. Among other analytical techniques, the procedure utilizes the $H{\ddot{o}}lder^{\prime}s$ and Minkowskis inequalities for integrals.

• Korean Journal of Materials Research
• /
• v.4 no.5
• /
• pp.574-580
• /
• 1994

This study is about cure kinetics of DGEBA/MDA/MN(malononitrile) system by Barrett method and Integral method using DSC dynamic run. Curing behavior was shown through DSC and the heat change involved in a reaction could be measured directly with DSC. The kinetic parameters such as activation energy, pre-exponential factor and reaction order were given by Barrett method and Integral method obtained in an assumption that the area of DSC enthalpic analysis curve was propotional to the enthalpic change.

• Kyungpook Mathematical Journal
• /
• v.53 no.3
• /
• pp.349-369
• /
• 2013

The present paper envisages the $q$-analogue of the exponential operators, determined by G. Dattoli and his collaborators for translation and diffusive operators which were utilized to establish analytical solutions of difference and integral equations. The generalization of their technique is expected to cover wide range of such utilization.

• The Pure and Applied Mathematics
• /
• v.21 no.2
• /
• pp.141-145
• /
• 2014

In the paper, by directly verifying an inequality which gives a lower bound for the first order modified Bessel function of the first kind, the authors supply a new proof for the complete monotonicity of a difference between the exponential function $e^{1/t}$ and the trigamma function ${\psi}^{\prime}(t)$ on (0, ${\infty}$).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.6
• /
• pp.1173-1178
• /
• 2010

In this note, a systematic design of a new robust nonlinear integral variable structure controller based on state dependent nonlinear form is presented for the control of uncertain more affine nonlinear systems with mismatched uncertainties and matched disturbance. After an affine uncertain nonlinear system is represented in the form of state dependent nonlinear system, a systematic design of a new robust nonlinear integral variable structure controller is presented. To be linear in the closed loop resultant dynamics and remove the reaching phase problems, the linear integral sliding surface is suggested. A corresponding control input is proposed to satisfy the closed loop exponential stability and the existence condition of the sliding mode on the linear integral sliding surface, which will be investigated in Theorem 1. Through a design example and simulation studies, the usefulness of the proposed controller is verified.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.629-632
• /
• 2003

This paper has been studied analysis and design of microstrip Rotman lens operating over wide band and wide steering angle by the contour integral method along with the segmentation method. All mutual coupling, internal reflections between ports with exponential taper are taken into account. Equally spaced ports are designed and realized which gives less amplitude ripple at array ports. The measured results of 12 input and 12 output lens show $\pm$1.8 dB insertion loss deviation over 6~18GHz wide frequency range and beam steering accuracy less than 1$^{\circ}$ over $\pm$53$^{\circ}$ angle and agrees well with the analysis results.

• Journal for History of Mathematics
• /
• v.27 no.6
• /
• pp.409-419
• /
• 2014

In school mathematics, the logarithmic function is defined as the inverse function of an exponential function. And the natural logarithm is defined by the integral of the fractional function 1/x. But historically, Napier had already used the concept of logarithm in 1614 before the use of exponential function or integral. The calculation of the logarithm was a hard work. So mathematicians with arithmetic ability made the tables of values of logarithms and people used the tables for the estimation of data. In this paper, we first take a look at the mathematicians and mathematical principles related to the appearance and the developments of the logarithmic tables. And then we deal with the confusions between mathematicians, raised by the estimation data which were known as proportional parts or mean differences in common logarithmic tables.

• Structural Engineering and Mechanics
• /
• v.66 no.3
• /
• pp.329-341
• /
• 2018

This paper considers the smooth receding contact problem between a homogeneous half-plane and a composite laminate composed of an inhomogeneously coated elastic layer. The inhomogeneity of the elastic modulus of the coating is approximated by an exponential function along the thickness dimension. The three-component structure is pressed together by either a concentrated force or uniform pressures applied at the top surface of the composite laminate. Both semianalytical and finite element analysis are performed to solve for the extent of contact and the contact pressure. In the semianalytical formulation, Fourier integral transformation of governing equations and boundary conditions leads to a singular integral equation of Cauchy-type, which can be numerically integrated by Gauss-Chebyshev quadrature to a desired degree of accuracy. In the finite element modeling, the functionally graded coating is divided into homogeneous sublayers and the shear modulus of each sublayer is assigned at its lower boundary following the predefined exponential variation. In postprocessing, the stresses of any node belonging to sublayer interfaces are averaged over its surrounding elements. The results obtained from the semianalytical analysis are successfully validated against literature results and those of the finite element modeling. Extensive parametric studies suggest the practicability of optimizing the receding contact peak stress and the extent of contact in multilayered structures by the introduction of functionally graded coatings.