Browse > Article
http://dx.doi.org/10.12989/sem.2018.66.3.329

On the receding contact between a two-layer inhomogeneous laminate and a half-plane  

Liu, Zhixin (Jiangsu Key Laboratory of Engineering Mechanics, School of Civil Engineering, Southeast University)
Yan, Jie (Jiangsu Key Laboratory of Engineering Mechanics, School of Civil Engineering, Southeast University)
Mi, Changwen (Jiangsu Key Laboratory of Engineering Mechanics, School of Civil Engineering, Southeast University)
Publication Information
Structural Engineering and Mechanics / v.66, no.3, 2018 , pp. 329-341 More about this Journal
Abstract
This paper considers the smooth receding contact problem between a homogeneous half-plane and a composite laminate composed of an inhomogeneously coated elastic layer. The inhomogeneity of the elastic modulus of the coating is approximated by an exponential function along the thickness dimension. The three-component structure is pressed together by either a concentrated force or uniform pressures applied at the top surface of the composite laminate. Both semianalytical and finite element analysis are performed to solve for the extent of contact and the contact pressure. In the semianalytical formulation, Fourier integral transformation of governing equations and boundary conditions leads to a singular integral equation of Cauchy-type, which can be numerically integrated by Gauss-Chebyshev quadrature to a desired degree of accuracy. In the finite element modeling, the functionally graded coating is divided into homogeneous sublayers and the shear modulus of each sublayer is assigned at its lower boundary following the predefined exponential variation. In postprocessing, the stresses of any node belonging to sublayer interfaces are averaged over its surrounding elements. The results obtained from the semianalytical analysis are successfully validated against literature results and those of the finite element modeling. Extensive parametric studies suggest the practicability of optimizing the receding contact peak stress and the extent of contact in multilayered structures by the introduction of functionally graded coatings.
Keywords
receding contact; functionally graded coating; singular integral equation; Gauss-Chebyshev quadrature; finite element analysis;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Adiyaman, G., Oner, E. and Birinci, A. (2017), "Continuous and discontinuous contact problem of a functionally graded layer resting on a rigid foundation", Acta Mech., 228(9), 3003-3017.   DOI
2 Balci, M.N., Dag, S. and Yildirim, B. (2016), "Subsurface stresses in graded coatings subjected to frictional contact with heat generation", J. Therm. Stress., 40(4), 517-534.
3 Birinci, A., Adiyaman, G., Yaylaci, M. and Oner, E. (2015), "Analysis of continuous and discontinuous cases of a contact problem using analytical method and FEM", Lat. Am. J. Sol. Struct., 12(9), 1771-1789.   DOI
4 Civelek, M. and Erdogan, F. (1974), "The axisymmetric double contact problem for a frictionless elastic layer", Int. J. Sol. Struct., 10(6), 639-659.   DOI
5 Comez, I. (2010), "Frictional contact problem for a rigid cylindrical stamp and an elastic layer resting on a half plane", Int. J. Sol. Struct., 47(7-8), 1090-1097.   DOI
6 Comez, I., Birinci, A. and Erdol, R. (2004), "Double receding contact problem for a rigid stamp and two elastic layers", Eur. J. Mech. A-Sol., 23(2), 301-309.   DOI
7 Comez, I., El-Borgi, S., Kahya, V. and Erdol, R. (2016), "Receding contact problem for two-layer functionally graded media indented by a rigid punch", Acta Mech., 227(9), 2493-2504.   DOI
8 El-Borgi, S., Abdelmoula, R. and Keer, L. (2006), "A receding contact plane problem between a functionally graded layer and a homogeneous substrate", Int. J. Sol. Struct., 43(3-4), 658-674.   DOI
9 El-Borgi, S., Usman, S. and Guler, M.A. (2014), "A frictional receding contact plane problem between a functionally graded layer and a homogeneous substrate", Int. J. Sol. Struct., 51(25-26), 4462-4476.   DOI
10 Adiyaman, G., Yaylaci, M. and Birinci, A. (2015), "Analytical and finite element solution of a receding contact problem", Struct. Eng. Mech., 54(1), 69-85.   DOI
11 Erdogan, F. and Gupta, G.D. (1972), "On the numerical solution of singular integral equations", Q. Appl. Math., 29(4), 525-534.   DOI
12 Keer, L.M. and Chantaramungkorn, K. (1972), "Loss of contact between an elastic layer and half-space", J. Elast., 2(3), 191-197.   DOI
13 Gecit, M.R. (1986), "Axisymmetric contact problem for a frictionless elastic layer indented by an elastic cylinder", Comput. Mech., 1(2), 91-104.   DOI
14 Guler, M.A., Kucuksucu, A., Yilmaz, K.B. and Yildirim, B. (2017), "On the analytical and finite element solution of plane contact problem of a rigid cylindrical punch sliding over a functionally graded orthotropic medium", Int. J. Mech. Sci., 120, 12-29.   DOI
15 Itou, S. and Shima, Y. (1999), "Stress intensity factors around a cylindrical crack in an interfacial zone in composite materials", Int. J. Sol. Struct., 36(5), 697-709.   DOI
16 Johnson, K.L. (1985), Contact Mechanics, Cambridge University Press, London, U.K.
17 Kauzlarich, J.J. and Greenwood, J.A. (2001), "Contact between a centrally loaded plate and a rigid or elastic base, with application to pivoted pad bearings", P. I. Mech. Eng. C-J. Mec., 215(6), 623-628.   DOI
18 Keer, L.M., Dundurs, J. and Tsai, K.C. (1972), "Problems involving a receding contact between a layer and a half space", J. Appl. Mech., 39(4), 1115-1120.   DOI
19 Li, X. (2013), Integral Equations, Boundary Value Problems and Related Problems, World Scientific Publishing, Singapore.
20 Erdogan, F. and Ratwani, M. (1974), "The contract problem for an elastic layer supported by two elastic quarter planes", J. Appl. Mech., 41(3), 673-678.   DOI
21 Mi, C. (2017), "Surface mechanics induced stress disturbances in an elastic half-space subjected to tangential surface loads", Eur. J. Mech. A-Sol., 65, 59-69.   DOI
22 Roncevic, B. and Siminiati, D. (2010), "Two-dimensional receding contact analysis with NX Nastran", Adv. Eng., 4(1), 69-74.
23 Oner, E., Yaylaci, M. and Birinci, A. (2014), "Solution of a receding contact problem using an analytical method and a finite element method", J. Mech. Mater. Struct., 9(3), 333-345.   DOI
24 Ortega, J.M. and Rheinboldt, W.C. (1987), Iterative Solution of Nonlinear Equations in Several Variables, Society for Industrial and Applied Mathematics, Philadelphia, U.S.A.
25 Parel, K. and Hills, D. (2016), "Frictional receding contact analysis of a layer on a half-plane subjected to semi-infinite surface pressure", Int. J. Mech. Sci., 108-109, 137-143.   DOI
26 Rhimi, M., El-Borgi, S. and Lajnef, N. (2011), "A double receding contact axisymmetric problem between a functionally graded layer and a homogeneous substrate", Mech. Mater., 43(12), 787-798.   DOI
27 Rhimi, M., El-Borgi, S., Ben, S.W. and Jemaa, F.B. (2009), "A receding contact axisymmetric problem between a functionally graded layer and a homogeneous substrate", Int. J. Sol. Struct., 46(20), 3633-3642.   DOI
28 Roncevic, B., Bakic, A. and Kodvanj, J. (2016), "Numerical and experimental analysis of a frictionless receding contact between cylindrical indenter, layer and substrate", T. Famena, 40(2), 1-18.
29 Tsai, K.C., Dundurs, J. and Keer, L.M. (1974), "Elastic layer pressed against a half space", J. Appl. Mech., 41(3), 703-707.   DOI
30 Turan, M., Adiyaman, G., Kahya, V. and Birinci, A. (2016), "Axisymmetric analysis of a functionally graded layer resting on elastic substrate", Struct. Eng. Mech., 58(3), 423-442.   DOI
31 White, R. (2010), Asymptotic Analysis of Differential Equations, Imperial College Press, Singapore.
32 Yaylaci, M. and Birinci, A. (2013), "The receding contact problem of two elastic layers supported by two elastic quarter planes", Struct. Eng. Mech., 48(2), 241-255.   DOI
33 Yan, J. and Li, X. (2015), "Double receding contact plane problem between a functionally graded layer and an elastic layer", Eur. J. Mech. A-Sol., 53, 143-150.   DOI
34 Yan, J. and Mi, C. (2017a), "Double contact analysis of multilayered elastic structures involving functionally graded materials", Arch. Mech., 69(3), 199-221.
35 Yan, J. and Mi, C. (2017b), "On the receding contact between an inhomogeneously coated elastic layer and a homogeneous halfplane", Mech. Mater., 112, 18-27.   DOI
36 Yaylaci, M., Oner, E. and Birinci, A. (2014), "Comparison between analytical and ANSYS calculations for a receding contact problem", J. Eng. Mech., 140(9), 04014070.   DOI
37 Adiyaman, G., Birinci, A., Oner, E. and Yaylaci, M. (2016), "A receding contact problem between a functionally graded layer and two homogeneous quarter planes", Acta Mech., 227(6), 1753-1766.   DOI
38 Adibelli, H., Comez, I. and Erdol, R. (2013), "Receding contact problem for a coated layer and a half-plane loaded by a rigid cylindrical stamp", Arch. Mech., 65(3), 219-236.