• 한국기계가공학회지
• /
• 제3권4호
• /
• pp.63-72
• /
• 2004

In this paper, a finite element formulation using dynamic-explicit time integration scheme is used for numerical analysis of auto-body panel stamping processes. The lumping scheme is employed for the diagonal mass matrix and dynamic explicit formulation. Auto-body panel forming is analyzed by using dynamic-explicit finite element method. Further, the simulated results of the auto-body panel stamping processes are shown and discussed. Its application is being increased especially in the stamping industrial area for the cost reduction, weight saving, and improvement of strength.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.783-788
• /
• 2000

Hydroforming is a method for forming circular tubes. If this technology is to be applied economically, it is essential to have knowledge of the avoidance of failure cases as well as of the behavior of the tube in the tool under the compressive stress and forces that are exerted by the machine. A finite element simulation for manufacturing of lower arm from straight tubes, using the hydroforming method, was performed to investigate the effects of varying process parameters. Explicit method is used to simulate hydroforming in many cases, but that is not included flow rule. And then it needs simulation for implicit method. It was simulated by two methods, implicit and explicit, to compare the result of the hydroforming.

• 한국정밀공학회지
• /
• 제15권6호
• /
• pp.97-106
• /
• 1998

In this Paper, a fuel minimizing closed loop explicit inertial guidance algorithm for orbit injection of a rocket is developed. In the formulation, the fuel burning rate and magnitude of thrust are assumed constant. The motion of rocket is assumed to be subject to the average inverse-square gravity, but negligible effects from atmosphere. The optimum thrust angle to obtain a given velocity vector in the shortest time with minimizing fuel consumption is first determined, and then the additive thrust angle for targeting the final position vector is determined by using Pontryagin's maximum principle. To establish real time processing, many algorithms of onboard guidance software are simplified. The explicit guidance algorithm is simulated on the 2nd-stage flight of the N-1 rocket developed in Japan. The results show that the explicit guidance algorithm works well in the presence of the maximum $\pm$10% initial velocity and altitude errors, and exhibits better performance than the open-loop program guidance. The effects of the guidance cycle time are also examined.

• 한국주거학회논문집
• /
• 제15권3호
• /
• pp.93-99
• /
• 2004

This study was conducted to estimate the solar energy, as an alternative energy evaluating an effect of solar radiation on indoor space of residential building. The basic data of solar radiation which is useful for architectural design was suggested using theoretical and experimental analysis. Accordingly, this study was carried out measuring the solar energy using Explicit Method. These results were compared with the results using steady state heat transfer method. The results of this study are summarized as follows; Based on the results using Explicit Method and steady state heat transfer on the indoor space of building, it was shown that an analysis on heat transfer using Explicit Method is more sensitive to the outdoor environmental changes. The results using Explicit Method to analysis and evaluate the solar radiation should be used for residential building design.

• 통합자연과학논문집
• /
• 제9권1호
• /
• pp.10-15
• /
• 2016

In this paper the approximation methods of offset curve of conic with explicit error bound are considered. The quadratic approximation of conic(QAC) method, the method based on quadratic circle approximation(BQC) and the Pythagorean hodograph cubic(PHC) approximation have the explicit error bound for approximation of offset curve of conic. We present the explicit upper bound of the Hausdorff distance between the offset curve of conic and its PHC approximation. Also we show that the PHC approximation of any symmetric conic is closer to the line passing through both endpoints of the conic than the QAC.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.10-22
• /
• 1998

In the present work the elastic-plastic FE formulations using dynamic explicit time integration schemes are used for numerical analysis of a large auto-body panel stamping processes. For analyses of more complex cases with larger and more refined meshes, the explicit method is more time effective than implicit method, and has no convergency problem and has the robust nature of contact and friction algorithms while implicit method is widely used because of excellent accuracy and reliability. The elastic-plastic scheme is more reliable and rigorous while the rigid-plastic scheme require small computation time. In finite element simulation of auto-body panel stamping processes, the roobustness and stability of computation are important requirements since the computation time and convergency become major points of consideration besides the solution accuracy due to the complexity of geometry conditions. The performnce of the dynamic explicit algorithms are investigated by comparing the simulation results of formaing of complicate shaped autobody parts, such as a fuel tank and a rear hinge, with the experimental results. It has been shown that the proposed dynamic explicit elastic-plastic finite element method enables an effective computation for complicated auto-body panel stamping processes.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 자동차부품 제작기술의 진보
• /
• pp.97-109
• /
• 1996

In the present work computations are carried out for analysis of complicated sheet metal forming process such as forming of a rear hinge. Finite element formulation using dynamic explicit time integration scheme and step-wise combined Implicit/Explicit scheme are introduced for numerical analysis of sheet metal forming process. The rigid-plastic finite element method based on membrane elements has long been employed as a useful numerical technique for the analysis of sheet metal forming because of its time effectiveness. The explicit scheme in general use is based on the elastic-plastic modelling of material requiring large computation time. In finite element simulation of sheet metal forming processes, the robustness and stability of computation are important requirements since the computation time and convergency become major points of consideration besides the solution accuracy due to the complexity of geometry and boundary conditions. The implicit scheme employs a more reliable and rigorous scheme in considering the equilibrium at each step of deformation, while in the explicit scheme the problem of convergency is eliminated at the cost of solution accuracy. The explicit approach and the implicit approach have merits and demerits, respectively. In order to combine the merits of these two methods a step-wise combined implicit/explicit scheme has been developed.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1994년도 수공학연구발표회논문집
• /
• pp.361-366
• /
• 1994

저수지 운영방안 정책결정에 있어 보다 효과적으로 적용할 수 있는 방법론의 개발이 여러측면에서 이루어져 왔다. 이중 동적계획기법의 Explicit 및 Implicit 해에 의한 최적운영방안의 검토가 한강수계의 충주댐을 대상으로 이루어졌다. 이들 방법은 한정된 과거 기록치로부터 합성유량을 발생하여 동적계획기법에 의한 충주댐 최적 운영모형에 적용하여 얻어진 상태변수 및 결정변수의 상관관계를 기준으로 도출한 운영율에 기초하여 모의운영모형을 개발할 수 있다. 개발된 모형중 Explicit 기법은 조건확율에 따른 전단계의 이산화된 유입량 조건별 운영단계의 월초저류량을 기준으로 월말 저류량은 결정하는 방법이며, Implicit 기법은 전단계 저류량 및 유입량, 운영단계 저류량 및 유입량을 대상으로 조합에 의한 회귀분석후 상관성이 우수한 운영율 방정식을 개발하게 된다. 본 연구에서는 이렇게 개발된 두가지 운영율을 기준으로 다목적 운영정책 결정을 위한 저수지 모의운영 모형을 개발하여 모형의 이행도를 평가하였다. Explicit 및 Implicit 기법에 기초한 모의모형의 평가방법은 모의치와 과거 운영실적을 비교하는 것으로 하고 Explicit 기법의 적용에서 홍수기 수문사상의 불확실성에 따른 저수지 운영 효율개선을 위하여 수정 방류량 결정방법을 도입하여 가장 적절한 저수지 운영모의모형 개발방법을 제시하고 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권3호
• /
• pp.1570-1594
• /
• 2017

Social network services have recently changed from environments for simply building connections among users to open platforms for generating and sharing various forms of information. Existing user reputation computation methods are inadequate for determining the trust in users on social media where explicit ratings are rare, because they determine the trust in users based on user profile, explicit relations, and explicit ratings. To solve this limitation of previous research, we propose a user reputation computation method suitable for the social media environment by incorporating implicit as well as explicit ratings. Reliable user reputation is estimated by identifying malicious information raters, modifying explicit ratings, and applying them to user reputation scores. The proposed method incorporates implicit ratings into user reputation estimation by differentiating positive and negative implicit ratings. Moreover, the method generates user reputation scores for individual categories to determine a given user's expertise, and incorporates the number of users who participated in rating to determine a given user's influence. This allows reputation scores to be generated also for users who have received no explicit ratings, and, thereby, is more suitable for social media. In addition, based on the user reputation scores, malicious information providers can be identified.

• 대한불안의학회지
• /
• 제8권1호
• /
• pp.3-8
• /
• 2012

Patients with panic disoder (PD) show recollection of their first panic attack, which resembles a trauma that is perceived as an unexpected frightening and subjectively life-threatening event. Information-processing models suggest that anxiety disorders may be characterized by a memory bias for threat-related information. This paper reviews the previous researches that investigated the implicit and/or explicit biases in patients with panic disorder. Among the 17 studies, which addressed the explicit memory bias in PD patients, 11 (64.7%) were found to be explicit memory bias in PD patients. In regards to the implicit memory bias, 4 out of 9 studies (44.4%) were found to support the memory bias. The result shows that evidence of explicit memory bias in PD patients was supported by a number of previous researches. However, evidence of implicit memory bias seems less robust, thus, needs further research for replication. Also, development of new paradigms and applications of various methods will be needed in further researches on memory bias in PD patients.