• 제목/요약/키워드: experimental test

검색결과 18,659건 처리시간 0.052초

수중 무선 전화기의 설계 - 수중무선전화기 설계를 위한 수중소음분석을 중심으로- (The Design of Wireless Underwater Telephone -Analysis of Underwater Background Noise for Wireless Underwater Telephone Design -)

  • 박문갑;윤갑동;김석제;윤종락
    • 수산해양기술연구
    • /
    • 제37권4호
    • /
    • pp.302-307
    • /
    • 2001
  • 본 연구는 잠수기 어업용 수중무선전화기를 설계하는데 있어 최적의 반송 주파수와 송신 신호의 음원 준위를 결정할 목적으로 우리 나라 잠수기 주 조업장의 하나인 거제와 통영 해역의 해양 배경소음과 조업중인 잠수기 어장의 수중 소음에 대하여 검토, 고찰한 결과를 요약하면 다음과 같다. 1. 거제와 통영의 잠수기 어장의 해양 배경 소음을 분석한 결과, 음압 준위는 25∼301kHz 부근에서 가장 낮아 52∼57dB이었고, 주변 통항 선박량과 산업시설이 많은 거제 해역이 통영 해역보다 약 5dB 더 높았다. 2. 거제와 통영의 잠수기 어선의 조업중의 수중소음을 비교하면, 최저 음압준위는 30kHz 부근에서 거제 어장에서는 67dB로서 통영의 62d묘보다 5dB 높은 음압 준위를 나타냈다. 이것은 거제 해역은 잠수기 어선의 규모도 통영 해역의 잠수기 어선보다 약간 크고, 분사기를 사용하여 작업하는데 비해 통영 해역은 잠수기 어선의 크기도 상대적으로 작고, 주 어획 대상물이 달라 분사기를 사용하지 않는 것이 그 원인으로 판단된다. 3. 거제 해역의 패류 채취용 분사기를 사용할 때의 수중 소음의 음압 준위는 102dB었다. 4. 거제 해역의 조업중에 대한 수중 배경 소음을 67dB라 가정할 때, 최대 500m까지 통화하기 위한 송신 신호의 음원 준위는 131dB 정도이다. 그러나, 통영 해역의 잠수기 조업은 분사기를 사용하지 않는 조업으로 이 경우 배경 소음은 약 62dB로서 송신 신호의 음원 준위는 126dB정도이다. 잠수기 조업중이 아닌 경우 즉, 스쿠버 다이버용 수중무선 전화기인 경우에는 배경 소음이 52∼57dB이므로 송신 신호의 음원 준위는 l16∼121dB이면 될 것으로 판단된다. 협동학습 모형이 수학 수업에 보다 발전적으로 널리 적용되기를 기대한다.cal results well visualized the streamlines, pressure fields, and speed vectors of a simple cambered and slot cambered otter board with slot size 0.02C. The slot cambered one with slot size 0.02C was shown that pressure field was distributed moderately on front and back side of otter board. And, the delay and decrease of separation were favorably achieved by flow through slot. 4. Computed result on the pattern of hydrodynamic field and the values of C/sub L/ and C/sub D/ by the commercial CFD code, FLUENT, show almost the same as those of the experimental result.erence was found in its fragrance. And, no difference was found in brightness and viscosity between samples. As a result of conducting the palatability test, no difference was showed in the appearance, but as for the overall palatability

  • PDF

Flowable 및 microfill 복합레진으로 충전된 제 5급와동에서 load cycling 전,후의 미세변연누출 비교 (MICROLEAKAGE OF MICROFILL AND FLOWABLE COMPOSITE RESINS IN CLASS V CAVITY AFTER LOAD CYCLING)

  • 강석호;김오영;오명환;조병훈;엄정문;권혁춘;손호현
    • Restorative Dentistry and Endodontics
    • /
    • 제27권2호
    • /
    • pp.142-149
    • /
    • 2002
  • Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988: Crim, 1989). Plowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfill had the least leakage (Rundle et at. 1997) Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 compostite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group (group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St. Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfill [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite[AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix II system, MTS Systems Corp. Minn. USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2% methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruscal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p = 0.05) Results : 1. There was significantly less microleage in enamel margins than dentinal margins of all groups (p<0.05) 2. There was no significant between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. there was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R>A =H=M>D>Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In enamel margins, load cycling did affect the marginal microleakage only in Revolution. (p<0.05).

근관내 주요 혐기성 병인균에 대한 수종 항생제와 근관충전용 세멘트의 항균효과에 관한 연구 (ANTIMICROBIAL EFFECT OF ANTIBIOTICS AND ROOT CANAL CEMENTS ON THE PREDOMINANT PATHOGENIC ANAEROBIC MICROFLORA IN ROOT CANALS)

  • 배광식
    • Restorative Dentistry and Endodontics
    • /
    • 제18권2호
    • /
    • pp.515-525
    • /
    • 1993
  • The purpose of this study was to evaluate the susceptibility of anaerobic microorganisms to certain antibiotics and root canal cements. Prevotella intermedia(Bacteroides intermedius) ATCC 25611(serotype A), Fusobacterium nucleatum ATCC 25586, Actinomyces viscosus ATCC 15987 which are the predominant pathogenic anaerobes in dental root canals were cultured in BHI for 48 hours(Fig.1). After each $200{\mu}l$ of those broths with microorganisms was streaked on each surface of blood agar plate, 2 to 5 antibiotic discs which are impregnated with Tetrncycline, Erythromycin, Ampicillin, Clindamycin, or Vancomycin were applied on each surface of blood agar plate and cultured for 5 days anaerobically in the anaerobic chamber (Fig.2). 15 antibiotic discs for each kind of antibiotics and each species of microorganisms were tested. Also each kind of root canal cement tubes which include Zinc oxide eugenol cement, Zinc phosphate cement, Calcium hydroxide powder+DD.W., Calcium hydroxide paste(Pulpdent Tempcanal), or Vitapex(Table 1) were applied on the inoculated BAPs after $200{\mu}l$ of each experimental species of microorganisms was streaked on the surface of blood agar plates, and they were cultured for 5 days anaerobically in the anaerobic chamber(Fig.3). The sensitivity(antimicrobial effect) was determined by the diameter of the inhibition zone. The results are as follows: 1. The results of antibiotic susceptibility test(Table 2) 1) All of the tested antibiotics had antimicrobial activity with various degrees. 2) In Prevotella intermedia (old Bacteroides intermedius), the diameter of inhibition zone to Erythromycin($37.87mm{\pm}2.20$) was largest, those to Tetracycline($26.20mm{\pm}2.96$), Vancomycin($21.53mm{\pm}1.96$), Clindamycin($18.73mm{\pm}0.96$) was smaller than former orderly, and That to Ampicillin ($7.87mm{\pm}0.83$) was smallest. 3) In Actinomyces viscosus, the diameter of inhibition zone to Erythromycin($28.73mm{\pm}1.22$) was largest, those to Ampicillin($21.73mm{\pm}1.03$), Clindamycin($21.33mm{\pm}1.59$) was similarly next order, that to Vancomycin($19.00mm{\pm}1.96$) was smaller than Clindamycin, and that to Tetracycline($11.93mm{\pm}0.70$) was smallest. 4) In Fusobacterium nucleatum, the diameter of inhibition zone to Ampicillin($31.07mm{\pm}1.91$) was largest, that to Erythromycin($28.87mm{\pm}0.92$), Clindamycin($20.47mm{\pm}1.51$), Vancomycin ($16.73mm{\pm}0.96$), Tetracycline ($12.13mm{\pm}1.06$) are smaller than former orderly. 2. The results of root canal cements and pastes(Table 3) 1) The external diameter of tube is 4mm, so 4mm of the inhibition zone diameter means non-susceptable. Prevotella intermedia (old Bacteroides intermedius) was non-susceptable to Calcium hydroxide powder+D.D.W., Calcium hydroxide paste(pulpdent Tempcanal), and Actinomyces viscosus was non-susceptable to Zinc phosphate cement, Calcium hydroxide powder + D.D.W., Calcium hydroxide paste(pulpdent Tempcanal). 2) In Prevotella intermedia (old Bacteroides intermedius), the diameter of inhibition zone to Zinc oxide eugenol cement($13.67mm{\pm}3.30$) was largest, that to Vitapex($9.20mm{\pm}2.96$), Zinc phosphate cement($6.13mm{\pm}2.07$) was smaller than former. 3) In Actinomyces viscosus, the diameter of inhibition zone to Zinc oxide eugenol cement($17.40mm{\pm}5.20$) was largest and that to Vitapex($8.80mm{\pm}1.70$) was next order. 4) In Fusobacterium nucleatum, the diameter of inhibition zone to Vitapex($42.33mm{\pm}17.2$) was largest and those to Calcium hydroxide paste(Pulpdent Tempcanal)($14.47mm{\pm}3.72$) and Zinc oxide eugenol cement($8.93mm{\pm}2.71$), Zinc phosphate cement($8.20mm{\pm}2.27$), Calcium hydroxide powder+D.D.W.($5.53mm{\pm}2.10$)was next orderly. And then In Zinc oxide eugenol cement and Zinc phosphate cement group, two of fifteen samples showed no inhibition zone, in Calcium hydroxide powder + D.D.W. group, 8 of 15 samples showed no inhibition zone.

  • PDF

Fractographic 분석을 통한 HEROShaper 니켈티타늄 전동 파일의 피로파절에 미치는 표면결함의 역할 (The Effect of Surface Defects on the Cyclic Fatigue Fracture of HEROShaper Ni-Ti rotary files in a Dynamic Model: A Fractographic Analysis)

  • 이정규;김의성;강명희;금기연
    • Restorative Dentistry and Endodontics
    • /
    • 제32권2호
    • /
    • pp.130-137
    • /
    • 2007
  • 본 연구의 목적은 니켈티타늄 전동파일의 피로파절에 있어서 표면 결함의 역할을 규명하고자 fatigue tester에서 반복적 인 fatigue force를 부여한 후 파절된 단면을 주사전자현미 경으로 관찰하여 파절 역학을 규명하는 것이다. 총 45개의 #30/.04 taper와 21 mm의 HEROShaper 니켈-티타늄 전동파일을 15개씩 3개의 군으로 분류하였다. 제 1군은 결함이 없는 새 HEROShaper파일, 제 2군은 제조과정에서 metal rollover나 machining marks와 같은 표면결함을 갖는 HEROShaper파일, 제 3군은 임상에서 4- 6개의 구치부 근관의 확대에 사용한 HEROShaper 파일을 사용하였다. 모든 파일들은 회전속도(300 rpm)와 pecking distance (3 mm)가 일정하게 맞춘 fatigue tester에서 파절될 때까지 시간을 측정한 후 통계분석을 통해 각 군간의 유의성을 분석하였고, 파절 단면의 farctographic analysis를 통해 파절역학을 규명하고자 하였다 실험결과 평균 파절시간에 있어서 group 1과 2, group 1과 3사이에는 통계학적으로 유의할 만한 차이가 있었으나 (p<0.05), group 2와 3사이에는 통계학적인 차이가 없었다. Fractographic analysis 결과 대부분의 파절면에서 microvoid와 dimple 소견을 갖는 ductile fracture양상이 관찰되었다. 또한 brittle fracture가 일어난 파절면에서는 파절선 전방에 수 많은 striation들이 관찰되었고 transgranular 및 intergranular cleavage 소견도 보였다. 표면결함이 있는 제 2, 3 군의 파절단면에서는 모든 시편에서 표면결함이 관찰되었다. 이와 같은 결과로 미루어 보아 표면결함이 반복 피로파절에서 미세균열의 기시점으로 중요한 역할을 하며 fractography분석법은 Ni-Ti 파일의 파절역학을 규명하는데 유용함을 알 수 있었다.

분산 서비스거부 공격 탐지를 위한 데이터 마이닝 기법 (Data Mining Approaches for DDoS Attack Detection)

  • 김미희;나현정;채기준;방효찬;나중찬
    • 한국정보과학회논문지:정보통신
    • /
    • 제32권3호
    • /
    • pp.279-290
    • /
    • 2005
  • 최근 분산 서비스거부 공격에 대한 피해사례가 증가하면서 빠른 탐지와 적절한 대응 메커니즘에 대한 필요성이 대두되었다. 그러나 지금까지 제안된 기존 보안 메커니즘은 이러한 공격들에 대해 충분한 대응책을 제공하지 못하고, 일부 공격에만 유효하거나 공격의 일부 변형에도 취약점을 갖고 있다. 그러므로 본 논문에서는 최신의 분산 서비스거부 공격 유형 잘 분류해 낼 수 있고, 기존 공격의 변형이나 새로운 공격에도 탐지 가능하도록 데이타 마이닝 기법을 이용한 탐지 구조를 제안한다. 이 탐지 구조는 이미 발견된 공격을 유형별로 분류할 수 있도록 모델링하는 오용탐지모듈과, 공격의 일반적인 특성을 이용 하여 새로운 유형의 공격을 발견할 수 있도록 모델링하는 이상탐지모듈로 구성되어 있다. 이렇게 오프라인으로 생성된 탐지 모델을 통해 실시간 트래픽 데이타를 이용한 탐지 구조를 갖고 있다. 본 논문에서는 실제 네트워크의 상황을 잘 반영시켜 모델링을 하고 시험하기 위해 실제 네트워크에서 사용중인 액세스 라우터에서 NetFlow 데이타를 수집하여 이용하였다. NetFlow는 많은 전처리 과정 없이 플로우 기반의 통계 정보를 제공하므로 분산 서비스거부 공격 분석에 유용한 정보를 제공한다. 또한 공격 트래픽을 수집하기 위하여 잘 알려진 공격 툴을 이용하여 실제 공격 트래픽에 대한 해당 액세스 라우터에서의 공격 NetFlow 데이타를 수집하였다. 시험 결과, 이러한 트래픽을 이용하여 두가지 데이타 마이닝 기법을 결합한오용탐지모듈의 높은 탐지율을 얻을 수 있었고, 새로운 공격에 대한 이상탐지모듈의 탐지 가능성을 입증할 수 있었다., 10kg/10a 파종에서 바랭이, 명아주, 별꽃, 12kg/10a 파종에서는 명아주, 바랭이, 새포아풀 순위였다. 이상의 시험결과를 볼 때, 제주지역에서의 Creeping bent-grass의 적정 파종량은 10kg/10a으로 판단된다.$\cdot$하순에 조파하는 것이 바람직할 것으로 판단된다.d real time PCR을 이용하여 DBP 유전자를 증폭하는 새로운 방법으로 말라리아를 Semi-quantitative 하게 검출할 수 있음을 보였다.C로 확인 결과 retention time 3.36에 single peak를 나타내 단일 물질임을 확인할 수 있었다. 분리된 활성물질을 GC-MS(m/z)로 분석한 결과 m/z 222에서 base peak로 나타났으며 이 spectrum으로 NIST library 검색을 실시 한 결과, $C_{12}H_{14}O_4$의 diethyl phtalate로 시사되었다. C-NMR과 1H-NMR을 실시한 결과 참비름에서 분리한 물질은 구조식 $C_{12}H_{14}O_6$인 diethyl phtalate로 동정되었다. 특히 노인인구의 비율이 높은 읍면지역 및 섬지역의 음주문화는 주로 식사를 하면서 반주로 마시는 경우가 많아 음주가 일상화 되어 있다고할 수 있다. 따라서 음주로 인한 질병 예방이나 치료를 목적으로 건강식품을 섭취한다는 인식은 하지 않고 있다. 본 연구결과 통영시에 포함되어 있는 읍면 및 섬지역은 노령화가 가속화되고 있으며,도시의 생활권에서 벗어나 의료혜택을 충분히 받지 못하는 열악한 환경에 놓여 있는 실정 이다

찬물 흘려대기 논의 수온 분포에 따른 벼의 엽 전개 일수 및 주간엽수와 출수일수의 품종간 차이 (Varietal Differences in Days Required to Leaf Expansion, Leaf Number on Main Culm, and Days to Heading of Rice under Cold Water Flow System)

  • 윤성호;윤종선;유길림;박창기;정근식
    • 한국작물학회지
    • /
    • 제36권3호
    • /
    • pp.214-219
    • /
    • 1991
  • 관계수온에 따른 벼 품종들의 출수일수, 주간엽 전개 소요일수, 주간총엽수 등을 조사하여 수온과 벼 품종들의 출수특성과의 관계를 구명하고자, 삼강벼 등 12개 품종을 공시하고, 찬물계속 흘려대기를 실시하여 동일 포장 내에서 수온의 차이를 둔 벼 내냉검정포에서 시험을 수행한 결과를 요약하면 다응과 같다. 1. 담수심을 5 cm로하여 찬물계속흘려대기를 실시할 때 관계수 정체시간은 3 시간 이었으며, 포장 내의 수온은 찬물유입구로부터 배수고를 향하여 거리가 밀어질수록 상승되었다. 대체로 기온이 높아짐에 따라 수온도 높아지는 경향이었고, 배수구 쪽의 수온은 벼의 영양생장기에는 기온보다 높았지만, 생식성장기에는 낮았다 2. 수온 상승에 따라서 주간엽의 전개속도는 빨라지는 경향이었으며, 품종별로는 복광벼, 상풍벼, YR3486-16-2 등은 민감하였으나 Janack, 밀양4002 등은 다소 둔감한 편이었다 3. 영양생장기에 비하여 생식성장기에 1엽전개 소요일수가 두드러지게 늘어난 품종은 Janack, Paro-white 등이 었 다. 4. 1엽전개 소요일수의 품종간 차이는 수온이 높았던 영양생장기보다 상대적으로 수온이 낮았던 생식성장기에 켰다 5. 수온이 비슷한 조건일 때 수온의 차이에 의한 전체 공시품종의 평균 1엽전개소요일수의 영양생장기와 생식생장기의 생육단계간 차이는 인정되지 않았으며, 수온 13$^{\circ}C$-23$^{\circ}C$ 범위에서는 1$^{\circ}C$ 상승에 따라 1.3 일만큼 감소하는 것으로 추정 되었다. 6. 수온에 따른 주간총엽수의 증감은 품종간에 차이가 있었다. 수온이 상승됨에 따라 1 엽이 증가된 품종은 복광벼, 광명벼, China 988, YR3486-16 등이었고, 주간총엽수의 변화가 없었던 품종은 소백벼, Paro-white, 상풍벼, 풍산벼, 삼강벼, 밀양4002 등이었다 7. Janack 품종은 수온의 상승에 따라 주간총엽수가 증가되면서, 출수일수도 늘어났지만, 그밖의 품종들은 수온 차이에 의한 주간총엽수의 변화와는 관계없이 수온 상승에 따라 출수일수가 단축되었는데, 그 정도는 품종마다 달랐다.

  • PDF

해양 플랑크톤 군집의 전기분해 염소소독 효과 (The Electrochemical Chlorination for Marine Plankton Community Disinfection)

  • 강정훈;신경순;현봉길;장민철;김은찬;장만
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제10권3호
    • /
    • pp.127-137
    • /
    • 2007
  • 전기분해 염소소독기로 처리한 결과가 국제해사기구의 협약에서 제시한 생물처리 기준(D-2 regulation)을 만족하는지 확인하기 위해 박테리아, 식물플랑크톤($10-50\;{\mu}m$) 및 동물플랑크톤($>50\;{\mu}m$)의 사멸효과를 확인하였다. 실험조건은 대조구와 잔류염소농도 10 ppm(Expt. 1)과 30 ppm(Expt. 2)을 실험구로 설정하였고, 시험수를 $23.8\;m^3/hr$의 속도로 전기분해염소독기에 통과시켰다. 시험수의 생물조건은 국제해사기구에서 작성된 선박 평형수 관리 장치의 승인을 위한 지침서에서 제시한 기준을 따랐다. 식물플랑크톤의 생사판별은 광학현미경, 형광현미경 및 형광측정기(Turner Designs 10-AU)를 이용하여 확인되었다. 두 농도 조건(10 ppm, 30 ppm)의 처리수에서 운동성이 있는 식물플랑크톤은 움직임이 나타나지 않았고, 형광현미경 하에서 엽록소 형광색이 적색에서 녹색으로 바뀌었으며, 형광값은 고농도(Expt. 1: 6.95, Expt. 2: 7.11)에서 0으로 바뀌었다. 이는 식물플랑크톤의 활성이 상실되어 모두 사멸되었음을 의미한다. 동물플랑크톤의 생사판별은 해부현미경하에서 부속지의 움직임을 토대로 결정되었다. 전기분해 염소소독기 처리 후 해양환경에서 채집되어 농축된 자연군집 동물플랑크톤은 모두 사멸되었으나, 일부 Artemia가 생존하였다. 그러나 각 잔류염소 농도조건의 암소에서 노출시킨 지 24시간 뒤에는 모든 동물플랑크톤이 사멸되었다. 박테리아는 Petrifilm plates($3M^{TM}$)를 이용한 접종배양법으로 처리수의 총 세균, 대장균 군 및 대장균의 사멸효과를 확인한 결과, 균주가 전혀 관찰되지 않았다. 또한 각 염소농도 조건의 처리수에서 추가적으로 노출시킨 5일 동안 세 그룹의 생물에서 재성장이 나타나지 않았다. 본 연구결과는 세 그룹의 생물에 대한 전기분해염소소독기 처리결과가 국제해사기구에서 제정한 선박 평형수 배출기준을 만족시켰음을 보여주었다.

  • PDF

브로일러의 성장에 관한 파리번데기 동충하초 급여효과 (Effect of Feeding Cordyceps with Fly Pupa on Growth Performance in Broiler Chickens)

  • 박병성
    • 생명과학회지
    • /
    • 제21권11호
    • /
    • pp.1541-1548
    • /
    • 2011
  • 본 연구는 파리번데기 동충하초(Cordyceps with fly pupa, CFP)의 급여가 브로일러의 성장능력에 미치는 영향을 조사하기 위하여 수행하였다. 부화 1일령 육계(Ross 308) 400수를 이용하여 4개의 처리구로 완전임의배치 한 후 35일 동안 사육하였다. 처리구는 T1 (CFP를 첨가하지 않은 무첨가 대조구), T2 (CFP 2.0% 첨가구), T3 (CFP 3.5% 첨가구) 및 T4 (CFP 5.0% 첨가구)로 구분하였다. 시험 전 기간 동안 브로일러의 증체량 및 사료효율은 T3가 유의하게 가장 높았으나(p<0.05) T1과 T2, T4 사이의 통계적인 유의차는 나타나지 않았다. 혈액 중성지방, 총 콜레스테롤 및 LDL.C 함량은 CFP 첨가구가 대조구에 비해서 유의하게 낮았다(p<0.05). 혈액 지질의 감소율 범위는 대조구와 비교할 때 CFP 첨가구에서 중성지방 5.32-10.63%, 총콜레스테롤 9.23-12.62%, LDL.C 44.67-53.81%로 나타났다. 복강지방 무게비율은 CFP 첨가구가 대조구와 비교할 때 유의하게 감소하였으며(p<0.05) 복강지방의 감소율 범위는 17.67-21.68%로 나타났다. 브로일러의 도체중, 도체율 및 도체중에 대한 가슴살과 피부를 포함한 다리살의 무게는 T3가 유의하게 가장 높았으며 T1과 T2, T4 사이의 통계적인 유의차가 인정되었다(p<0.05). 장 내 유해균인 E. coli, Salmonella는 CFP 첨가구가 대조구에 비해서 낮았으나 유익한 균인 Bifidobacteria는 CFP 첨가구가 대조구에 비해서 유의하게 높았다(p<0.05). 본 결과는 파리번데기 동충하초가 브로일러의 증체량 및 도체특성을 개선시킬 수 있음을 시사해준다.

가공의치(架工義齒) 납착부(蠟着部)의 강도(强度)와 내부구조(內部構造)에 관(關)한 실험적(實驗的) 연구(硏究) (An experimental study of the strength and internal structure of solder joint of fixed partial denture)

  • 박상남;계기성
    • 대한치과보철학회지
    • /
    • 제23권1호
    • /
    • pp.39-59
    • /
    • 1985
  • The purpose of this study was to investigate how gap distances of 0.13mm, 0.15mm, 0.20mm, and 0.30mm affects solder joint strength from gold alloys and nickel-chromium base alloys and to examine the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys. The tensile test specimens were prepared in the split stainless steel mold with a half dumbbell shape 2.5mm in diameter and l2mm in length. 6 pairs of specimens of each gap distance group of gold alloys and nickel-chromium base alloys were made and 48 pairs of all specimens were soldered with solder gold of 666 fineness. All soldered specimens were machined to a uniform diameter and then a tensile load was applied at a cross-head speed of 0.10mm/min using Instron Universal Testing Machine, Model 1115. The fractured specimens at solder gold of solder joint fracture with each gap distance of 0.13mm, 0.15mm, 0.20mm, and 0.30mm were examined under the Scanning Electron Microscope, JSM-35c and the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys was analyzed by Electron Probe Micro Analyzer. The results of this study were obtained as follows: 1. In case of soldering of gold alloys, the tensile strength between gold alloys showed $37.33{\pm}2.52kg/mm^2$ at 0.13, $39.14{\pm}3.35kg/mm^2$ at 0.15mm, $43.76{\pm}2.97kg/mm^2$ at 0.20mm, and $49.18{\pm}4.60kg/mm^2$ at 0.30mm. There was statistically significant difference at each gap distance, and so the greater increase of gap distance showed the greater tensile strength. 2. In case of soldering of nickel-chromium base alloys, the tensile strength between nickel-chromium base alloys showed $34.84{\pm}4.26kg/mm^2$ at 0.13mm, $37.25{\pm}2.49kg/mm^2$ at 0.15mm, $42.91{\pm}4.32kg/mm^2$ at 0.20mm, and $46.93{\pm}4.21kg/mm^2$ at 0.30mm. There was not statistically significant difference only between 0.13mm and 0.15mm and bet ween 0.20 mm and 0.30mm, but generally the greater increase of gap distance showed the greater tensile strength. 3. The greater increase of gap distance shoed less porosities in solder gold at solder joint fracture. 4. In solder gold Au, Cu, Ag, Zn, and Sn were composed and Au and Cu were mostly distributed uniformly. 5. In solder joints of solder gold and gold alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Au, Cu, Ag, Pt, and Pd were composed in gold alloys. Au and Cu of solder gold and gold alloys were mostly distributed uniformly and the diffusion of other elements except Pt and Pd around the solder joint was not almost found. In solder joints of solder gold and nickel-chromium base alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Ni, Cr, and Al were composed in nickel-chromium base alloys. Au and Cu of solder gold and Ni and Cr of nickel-chromium base alloys were mostly distributed uniformly and the diffusion of other elements except Cr around the solder joint was not almost found.

  • PDF

와동 세척제가 상아질 결합제의 결합에 미치는 영향 (EFFECT OF CAVITY DISINFECTANT ON THE BOND STRENGTH AND MICROLEAKAGE OF DENTIN BONDING AGENTS)

  • 송승호;이주현;박호원
    • 대한소아치과학회지
    • /
    • 제32권4호
    • /
    • pp.595-603
    • /
    • 2005
  • 와동 형성시 박테리아에 감염된 상아질이나 법랑질을 완전히 제거하지 않는 것은 수복학적 측면에서 볼 때 잠재적 문제점이 된다. 수복물 하방에서의 박테리아의 활동에 의해 술후 과민반응, 치수의 염증. 이차 우식 등이 진행될 수 있다. 와동세척제는 와동 형성 후 잔존 박테리아의 제거를 위해 효과적으로 사용될 수 있지만 상아세관에 잔유물을 남겨 상아질 결합제와 치질간의 긴밀한 결합을 방해하여 미세누출을 증가시키고 결합강도를 약화시킬 가능성이 있다. 본 연구는 2% 클로르헥시딘을 함유하는 와동 세척제인 $Consepsis^{(R)}$(Ultradent, USA)가 $Adper^{TM}$ $Scotchbond^{TM}$ Multi-Purpose(3M ESPE, USA), $Adper^{TM}$ Single Bond(3M ESPE, USA), $Adper^{TM}$ $Prompt^{TM}$ $L-Pop^{TM}$(3M ESPE, USA)의 결합에 미치는 영향을 평가하기 위하여 발거된 제 3대구치 120개를 이용하여 $Consepsis^{(R)}$ 와동 세척제를 사용한 군과 사용하지 않은 군으로 나누어 전단결합강토 측정과 수복물 변연에 나타나는 미세누출 정도를 색소 침투 평가 방법으로 분석함으로써 다음과 같은 결론을 얻었다. 1. $Consepsis^{(R)}$ 와동 세척제의 사용 유무는 $Adper^{TM}$ $Scotchbond^{TM}$ Multi-Purpose, $Adper^{TM}$ Single Bond, $Adper^{TM}$ $Prompt^{TM}$ L-Pop의 전단결합강토에 있어 통계학적으로 유의한 차이를 보이지 않았다(p>0.05). 2. $Consepsis^{(R)}$와동 세척제의 사용 유무는 $Adper^{TM}$ $Scotchbond^{TM}$ Multi-Purpose, $Adper^{TM}$ Single Bond, $Adper^{TM}$ $L-Pop^{TM}$ $L-Pop^{TM}$의 미세누출 양상에 있어 통계학적으로 유의한 차이를 보이지 않았다(p>0.05).

  • PDF