• 한국전기전자재료학회논문지
• /
• 제26권1호
• /
• pp.49-55
• /
• 2013

In this paper, semiconducting shield specimens for a DC cable os fabricated and characterized by measurement of volume resistance, tensile strength, and the coefficient of expansion to show the electrical and mechanical characteristics of the semiconducting shield. Due to the PTC phenomenon, the volume resistance at $25^{\circ}C$ increases rapidly in comparison to the volume resistance at $90^{\circ}C$. Since the compounding ration of carbon black is low, the tensile strength and density become lower and the coefficient of expansion is increased. As the general specification of the tensile strength and density is $0.8kgf/mm^2$ and 150%, respectively, the fabricated specimen in this paper has excellent mechanical characteristic.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.114-117
• /
• 2007

In IRR(Integral Rocket-Ramjet), the booster is integrated into the ramjet combustor. Such combustors do not contain combustor liners or flame holders within the combustor due to the limited volume and flame stabilization depends on the recirculation zones formed by the sudden expansion region between the inlet duct and the combustor. A numerical study was conducted on the effect of flame holder which could be added to the inlet duct of IRR. Two different types of flame holder installations, flame holder without sudden expansion region and flame holder with small sudden expansion region, were compared and showed different flame shapes and pressure rise in the combustor.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.160.2-160.2
• /
• 2014

Recently silicon has attracted intense interest as a promising anode material of lithium-ion batteries due to its extremely high capacity of 4200 mA/g (for Li4.2Si) that is much higher than 372 mAh/g (for LiC6) of graphite. However, it seriously suffers from large volume change (even up to 300%) of the electrode upon lithiation, leading to its pulverization or mechanical failure during lithiation/delithiation processes and the rapid capacity fading. To overcome this problem, Si nanowires have been considered. Use of such Si nanowires provides their facile relaxation during lithiation/delithiation without mechanical breaking. To design better Si electrodes, a study to unveil atomic-scale mechanisms involving the volume expansion and the phase transformation upon lithiation is critical. In order to investigate the lithiation mechanism in Si nanowires, we have developed a reactive force field (ReaxFF) for Si-Li systems based on density functional theory calculations. The ReaxFF method provides a highly transferable simulation method for atomistic scale simulation on chemical reactions at the nanosecond and nanometer scale. Molecular dynamics (MD) simulations with the ReaxFF reproduces well experimental anisotropic volume expansion of Si nanowires during lithiation and diffusion behaviors of lithium atoms, indicating that it would be definitely helpful to investigate lithiation mechanism of Si electrodes and then design new Si electrodes.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 2007년도 제57회 학술발표회논문집
• /
• pp.949-955
• /
• 2007

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1141-1148
• /
• 2008

One of the methods to increase the efficiency of an engine is to expand pressures obtained from combustions equal to the pressure of atmosphere as much as possible and then convert thermal energy into mechanical energy also as much as possible. In this research, the Diesel cycle was thermodynamically interpreted to evaluate the possibility of high efficiency by converting Diesel engines to the Atkinson cycle, and general cycle features were analyzed after comparing these two cycles. In the case of fuel air the Diesel-Atkinson cycle considering intake and exhaust similar to real cycles, the value of thermal efficiency and average effective pressure increased, though their values were smaller than those of standard air amount cycle, when expansion compression ratio increased. When normal Diesel engines of which compression stroke and expansion stroke are all the same, was converted to the Atkinson cycle by changing the time of intake value close, combustion pressure reduced due to reduced expansion compression ratio and intake air amount due to decreased effective cycle volume.

• 대한치과교정학회지
• /
• 제49권4호
• /
• pp.235-245
• /
• 2019

Objective: This study examined bone microstructure restoration after rapid maxillary expansion (RME) with and without corticotomy over multiple retention periods. Methods: Eighteen male Dorper sheep were randomly distributed into three groups (n = 6 each group): group 1, RME with corticotomy on the buccal and palatal sides; group 2, conventional RME treatment; and group 3, no treatment. Post-RME, trabecular bone microstructure and new bone formation were evaluated by using microcomputed tomography (microCT) and histomorphometry after a 4- or 12-week retention period. Intergroup differences in bone quality and bone remodeling were analyzed by using two-way analysis of variance with Bonferroni post-hoc test. Results: The bone volume fraction (bone volume [BV]/total volume [TV]) values relative to the control in groups 1 and 2 were 54.40% to 69.88% after the 4-week retention period and returned to approximately 80% after the 12-week retention period. The pooled BV/TV values of the banded teeth in groups 1 and 2 were significantly lower than those of the control after the 4-week retention period (p < 0.05). However, after the 12-week retention period, the pooled BV/TV values in group 2 were significantly lower than those in groups 1 and 3 (p < 0.05). Histomorphological analysis showed that the new bone formation area in group 1 was approximately two to three times of those in group 2 and control. Conclusions: Corticotomy significantly enhanced the restoration of bone quality after the retention periods for banded teeth. This benefit might result from the increased new bone formation after corticotomy.

• 항공우주기술
• /
• 제13권1호
• /
• pp.76-85
• /
• 2014

본 연구에서는 다양한 열팽창계수 예측기법을 활용해서 섬유강화 복합재료 라미나 등가 열팽창계수 예측을 수행하였다. 등가열팽창계수를 예측하는 많은 식들이 제안되어 왔지만 사용대상에 따라 제약이 있거나, 예측결과가 시험결과와 잘 일치하지 않는 문제점을 갖고 있다. 본 연구에서 실제 복합재료 형상과 유사한 대표체적요소를 선정하여 유한요소 모델링을 수행하고 여기에 주기적 경계조건을 부여하여 재료의 등가열팽창계수를 예측하였다. 예측결과를 기존의 예측식 및 시험결과와 비교하여 그 성능을 검증하였으며, 별추적기 지지구조물의 열지향오차해석을 수행하고 다양한 예측물성을 따라 그 정확도를 검토하였다.

• 청정기술
• /
• 제19권1호
• /
• pp.44-50
• /
• 2013

리튬이온전지에서 음극활물질의 저장용량을 증가시키기 위하여 주석산화물에 대한 연구가 많이 수행되고 있다. 주석산화물은 기존의 흑연 음극활물질보다 충방전 용량이 높다. 하지만 충방전이 진행되는 동안에 부피팽창률이 높아서 활물질이 파괴되는 현상이 나타나므로 과도한 비가역용량이 문제가 된다. 이를 해결하기 위하여 물리적 완충역할을 하는 물질이 첨가된 복합산화물을 제조하였다. $SnO_2-SiO_2$ 복합산화물을 솔-젤법을 이용하여 제조하였다. 10 vol% 프로필렌기체를 이용하여 탄소피복을 하여 전기전도성을 증가시켰다. TG/DTA, XRD, SEM과 FT-IR을 이용하여 제조된 물질의 물성을 분석하였으며, CR2032 코인셀을 제조하여 전기화학적인 특성을 조사하였다. $300^{\circ}C$로 열처리한 후에 탄소피복한 $SnO_2-SiO_2$ 활물질의 전기화학적 특성이 가장 우수하였다.

• 전기화학회지
• /
• 제18권2호
• /
• pp.68-74
• /
• 2015

본 실험에서는 리튬이차전지의 고용량 음극활물질로 주목받는 Si 합금의 부피팽창을 억제하기 위한 방법의 하나인 비활성-matrix상을 이용하고, 상태도를 이용하여 동일한 용량을 발현하는 Si계 이원계 합금 (Cr-Si, Ni-Si) 조성에서의 미세구조 및 전기화학적 특성을 비교/분석하였다. 급속응고공정(Rapid Solidification Process, Melt-spinning법)를 이용하여 동일조건하에서 리본 모양의 합금을 제작하였고, 제작된 리본합금은 동일조건에서 분쇄하여 X-선회절 (X-Ray Diffraction) 분석을 실시하였다. XRD 분석 결과, 상태도에서 예측된 것과 같이, 두 합금 모두 Si 상 및 비활성-matrix상($CrSi_2$ 및 $NiSi_2$)이 관찰되었으며, 이외의 제3의 상은 관찰되지 않았다. 또한, 주사전자현미경(SEM, Scanning Electron Microscope) 및 투과전자현미경-에너지분산분광법(TEM-EDS, Transmission Electron Microscopy - Energy Dispersive X-ray Spectroscopy)으로 미세구조를 살펴본 결과 Cr-Si 합금의 미세구조가 Ni-Si 합금보다 fine한 것을 알 수 있었고 이것은 상태도로부터 예측 가능하였다. 두 합금 조성에서 미세구조에 따른 전기화학적 특성을 비교 평가하기 위해 코인형 하프셀과 풀셀로 충방전 실험을 진행하였고 이와 별도로, 전극의 두께변화 측정이 가능하게 설계된 시험셀을 이용하여 반응 중 Si의 수축팽창을 측정하였다. coarse한 미세구조를 가진 Ni-Si 합금보다 fine한 미세구조를 갖는 Cr-Si 합금의 전극팽창이 비교적 잘 억제됨을 확인하였고, 충방전에 따른 수명 내구성도 우수함을 확인하였다. 이런 결과들로부터 합금의 조성에 따른 미세구조, 체적변화 및 전기화학적 열화와의 연관성을 유추할 수 있었다.

• Journal of the Optical Society of Korea
• /
• 제2권2호
• /
• pp.58-63
• /
• 1998

Cross-talk effects in high-density volume holographic interconnections are investigated using perturbative iteration method of the integral form of Maxwell's wave equation. In this method, the paraxial approximation and negligence of backward scattering introduced in conventional coupled mode theory is not assumed. Interaction geometries consisting of non-coplanar light waves and multiple index gratings are studied. Arbitrary light polarization is considered. Systematic analysis of cross-talk effects due to multiple index gratings is performed in increasing level of diffraction orders corresponding to successive iterations. Some numerical examples are given for first and third order diffraction.