• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.215-222
• /
• 2003

Mild combustion or Flameless oxidation(FLOX) have been considered as one of the most prospective clean-combustion technologies to meet both the targets of high process efficiency and low pollutant emissions. A mild combustor with high air preheating and strong internal exhaust gas recirculation is characterized by relatively low flame temperature, low NOx emissions, no visible flame and no sound. In this study, the Steady Flamelet Approach has been applied to numerically analyze the combustion processes and NOx formation in the mild combustor. The detailed discussion has been made for the basic characteristics of mild combustor, numerical results and limitation of the present combustion modeling.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.2049-2057
• /
• 2004

In this study, the combustion characteristics and durability of a diesel engine using emulsified fuel was investigated. Water was used in oil type emulsified fuel. In order to understand the effect of emulsified fuel in a wide range of engine running conditions, D-13 mode was selected as a test condition, and a durability test was included to understand the long-term effect of water. Combustion pressure in a cylinder, exhaust emissions, specific fuel consumption, sound level and maximum torque were measured. NOx and PM were simultaneously reduced and the specific fuel consumption was increased and decreased at low and high loads, respectively. There was no trouble and any damage on the parts of the cylinder during a 500 hour durability test.

• 한국소음진동공학회논문집
• /
• 제17권10호
• /
• pp.950-957
• /
• 2007

This paper considers acoustic characteristics of silencer within a dry vacuum pump. The main objective is to reduce noise in dry vacuum pump using the new designed silencer. First, SPL and sound intensity are measured for noise source identification and the new model silencer is designed corresponding to noise characteristics. 4-pole parameters are used to predict the transmission loss which is one of the interest characteristics of the new silencer. The calculated transmission loss is then used to change main effective factor and optimal value is selected by using design of experiment. By conducting an experiment, it is proved that the new designed silencer has reduced noise level by 6 dB(A) more than the original one.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.60-67
• /
• 2005

Mild combustion or Flameless oxidation(FLOX) have been considered as one of the most prospective clean-combustion technologies to meet both the targets of high process efficiency and low pollutant emissions. A mild combustor with high air preheating and strong internal exhaust gas recirculation is characterized by relatively low flame temperature, low NOx emissions, no visible flame and no sound. In this study, the Steady Flamelet Approach has been applied to numerically analyze the combustion processes and NOx formation in the mild combustor. The detailed discussion has been made f3r the basic characteristics of mild combustor, numerical results and limitation of the present combustion modeling.

• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.66-75
• /
• 1997

Sound transmission from the luggage comparment into the car cabin is important in the viewpoint if exhaust and road noises of passenger cars. In this paper, acoustic modal coupling between passenger and luggage compartments through loudspeaker holes at parcel shelf is dealt with for a sedan type passenger car with rigid rear seat. For these purposes, a half-scaled model car is tested and computed by the indirect BEM. Predicted acoustic transfer functions are compared with experimental ones and they agree reasonably well. It is found that the fore-aft resonance frequencies of the passenger cavity in the absence of coupling holes are tend to shift to higher frequencies when the luggage compartment is coupled to the passenger cavity.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.37-45
• /
• 2003

The diesel engines was invented a little more than one hundred years ago and has ever since been developed for better fuel economy, increased power and smaller size. Thanks to its fuel economy, the diesel engine is today the dominating prime mover in many applications, such as smaller power plants, commercial ships, trains, trucks, buses and all kinds of mobile construction machinery. As engine for passenger cars, the diesel engine is steadily increasing its share of the market. However, its versatility and, consequently, large prevalence have led to environmental demands to its exhaust emissions, noise and vibration. This paper deals with the noise aspects of diesel engine designs of the so-called low speed two-stroke type installed in most large ships.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.277-282
• /
• 2006

Road traffic noise is not produced by any one factor rather occurs as a composition of various factors. Its occurrence is made by running engine noise, tire frictional, and exhaust noise etc. The quality of the noise depends on the size of the vehicles, rotation and engine speed, vehicle load, package state of the road and incline etc. The occurrence of noise level of heavy trucks appears louder than smaller vehicles and the noise levels produced differs according to speed and load etc between similar size vehicles. Other factors such as traffic density, average speed, mixing rate of heavy vehicles, and the distance between vehicles also generate road traffic noise. In this paper we examine 2, 4, and 6-lane roads in Jeonju. Consequently, this study examined the means used to measure road traffic noise. It was found that when there is a large traffic density and the average velocity is below 70 km/hr, the noise level could receive a relative proper value by the current measuring means. But in the case of night-time, it was found that the current measuring method is inapposite.

• 한국소음진동공학회논문집
• /
• 제17권3호
• /
• pp.274-281
• /
• 2007

Road traffic noise is not produced by any one factor rather it occurs as a composition of various factors. Its occurrence is made by running engine noise, tire frictional, and exhaust noise etc. The quality of the noise depends on the size of the vehicles, rotation and engine speed, vehicle load, package state of the road and incline etc. The occurrence of any noise level of heavy trucks appears louder than smaller vehicles and the noise levels produced differs according to speed and load etc between similar size vehicles. Other factors such as traffic density, average speed, mixing rate of heavy vehicles, and the distance between vehicles also generate road traffic noise. In this paper we examine 2, 4, and 6-lane roads in Jeonju. Consequently, this study examines the means used to measure road traffic noise. It was found that when there is a large traffic density and the average velocity is below 70 km/h, the noise level could receive a relative proper value by the current measuring means. But in the case of night-time, it was found that the current measuring method is inapposite.

• 터널과지하공간
• /
• 제11권4호
• /
• pp.319-327
• /
• 2001

장대도로터널 환기시스템의 최적 설계 및 운영은 새로운 설계도구의 개발을 요구하며 최근 환기 관련 변수들의 동적인 관계를 정량적으로 분석할 수 있는 도구로써 널리 이용되고 있다. 본 연구는 도로터널 환기시뮬레이션 모델인 NETVEN의 현장 검증연구를 국내 도로터널을 대상으로 수행함을 목적으로 하였다. 환기방식 및 차량통행방식이 다른 4개 터널을 대상으로 시뮬레이션 및 현장 측정연구를 수행하였으며 시뮬레이션 모델의 적용 결과와 측정 결과의 차이는 다음 4가지 요인에 기인한 것으로 분석된다. (1)실제 터널내 기류는 정상류 유동을 가정하는 시뮬레이션 모델과는 달리 천이-지연계의 특성을 가지고 있다. (2) 시뮬레이션 모델은 정상상태를 가정하나 측정값은 순간값을 대상으로 하므로 분산이 상대적으로 크게 나타난다. 환기력 관련변수들은 거의 정상상태가 아니며 교통 및 기상관련 변수들은 특히 순간적인 변화가 심한 편이다. (3) CO 농도의 경우에 출구부근에서의 차이가 상대적으로 크게 나타나는 현상이 뚜렷하며 특히 농도가 상대적으로 클수록 차이가 크다. 이는 난류확산에 의한 농도 저하가 원인으로 보인다. 난류확산 가능성은 최대 농도지점이 출구점이 아닌 약간 안쪽 지점에서 나타나는 현상에서도 나타나고 있다. (4) 교통량이 많을 경우 환기속도 오차가 크게 나타나므로 차량의 배기특성뿐만 아니라 공기역학적 특성에 대한 지속적인 연구가 필요하다.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.570-575
• /
• 2019

능동 머플러는 자동차 머플러의 배기소음을 저감하기 위하여 능동 소음 제어 기법을 적용하여 구현된다. 기존의 보편적인 Filtered_x LMS 알고리즘은 음향 궤환이 존재할 경우 제어필터의 차수가 매우 커지고 수렴성이 악화되는 문제가 있다. 이를 보완할 수 있는 Recursive LMS 알고리즘은 적응필터의 적응과정에서 쉽게 발산할 수 있어 적용이 제한되어 왔다. 본 논문에서는 수렴 성능과 계산량 부담이 개선되도록 1차 경로와 2차 경로 전달함수의 구조를 IIR 필터로 설계하였으며 IIR 필터 구조의 단점인 안정성 확보를 위해 안정화 필터 알고리즘을 적용하였다. 안정화 필터 알고리즘은 적응과정 중에 음향 궤환에 해당하는 전달함수의 극점이 발산하는 것을 방지하기 위하여 극점을 단위원 내부로 끌어 당기는 역할을 수행한다. 이러한 방법으로 능동 머플러 시스템의 계산량 절감과 수렴성능을 향상시킬 수 있다. 제안한 시스템의 유용성을 보이기 위하여 가변 환경인 디젤 엔진의 배기음향을 대상으로 기존의 Filtered_x LMS 알고리즘과 제안한 시스템과의 성능을 비교하여 그 우수성을 보였으며, 계산량은 절반 이하, 수렴 특성은 4배 이상의 성능을 보였다.