• Tribology and Lubricants
• /
• 제29권1호
• /
• pp.1-6
• /
• 2013

Hydraulic transmission is the main component delivering power to the drive wheels of an excavator during forward and backward movement, and it has low speed, high torque and high speed, low torque gear change ratios as a forward/backward two-speed main function. It also has additional function of ensuring that the excavator is stably fixed on the ground with the built-in parking brake during excavation operations. In this study, optimal design specifications are determined by modeling and simulating about the multi-disc-type friction clutch, which is the main component improving the reliability of the hydraulic transmission for a 14-ton wheel excavator, and the friction properties of the transmission clutch are analyzed by performing sample tests.

• 한국터널지하공간학회 논문집
• /
• 제24권5호
• /
• pp.395-409
• /
• 2022

기존 암반 굴착공법이 갖는 한계점을 극복하기 위해 최근 연마재 워터젯 공법을 활용하는 연구가 활발히 진행되고 있다. 연마재 워터젯 암반굴착 공법은 암반에 연속적인 자유면을 형성하여 발파 시 발생하는 진동을 저감하고 굴착효율을 증진시키는 효과가 있다. 그러나 연마재 워터젯 절삭성능은 암반의 물리적 성질에 따라 변화한다. 따라서, 다양한 물리적 성질을 가진 암반이 혼재하는 굴착현장 특성상 효과적인 워터젯 활용을 위해서는 다양한 암종의 절삭성능을 분석하는 것이 필수적이다. 본 연구에서는 현무암과 화강암을 대상으로 수압, 이격거리, 이송속도를 변화시키며 절삭실험을 수행하고 결과를 분석하였다. 실험결과, 현무암은 화강암보다 평균적으로 약 41% 깊게 절삭되고, 절삭 폭은 약 18.5% 좁게 형성되었다. 본 연구결과는 향후 현무암과 같은 강도가 낮고 공극이 큰 암반 굴착현장에서 연마재 워터젯을 적용할 시 유용한 기초자료로 활용될 것으로 기대된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.319-326
• /
• 2000

It is investigated character of the dynamic behavior at over excavation zone of roadbed using crushed stone instead of lean concrete. It is considered that behavior of roadbed using PENTAGON-3D and Baber's equation. Typical load of sine wave type using impact factor is compared to moving load system to examine relationship in using PENTAGON-3D case. Variations of this paper are material properties of roadbed, train velocity, subgrade bearing capacity. Using variations, safety of roadbed is estimated by dynamic behavior character.

• 대한토목학회논문집
• /
• 제13권5호
• /
• pp.109-122
• /
• 1993

유체포화 다공매체에서의 단계적 굴착시 형상변화로 인한 구조거동을 시간종속적 배수이론으로 예측하기 위한 유한요소해석방법을 제시하였다 시간종속적 배수거동을 고려한 유한요소방정식을 유도하기 위하여 Biot의 방정식을 사용하였다. 이론해가 존재하는 재하 하중에 의한 시간종속적 배수거동 문제의 해석과 완전배수거동시 1단계 굴착과 다단계 굴착시의 변형이 동일한가를 확인하므로써 유도된 방법의 타당성을 검증하였다. 1차원 및 2치원 문제에 대하여 시간종속적 배수모형과 완전배수모형에 의한 결과를 비교하여 그 차이를 예시하였다. 또한 단계적 굴착시 굴착속도 및 투수계수의 변화에 따른 영향도 분석하였다. 수치해석 시뮬레이션을 통해, 다공매체지반의 굴착해석시에는 시간종속적 배수거동에 근거한 해석이 보다 신뢰할 수 있음을 고찰하였다.

• 산업기술연구
• /
• 제20권A호
• /
• pp.257-267
• /
• 2000

It was difficult to apply conventional excavation methods in some sections from Seoul to Pusan high speed rail road construction of 1 lot 2, due to highway concrete road, gas pipe, water pipe and nearby factories with automatic control system machine. To excavate safely and efficiently in these sections new blast patterns were employed within allowable blast vibration level, by test blast and controlled vibration by sequential blast. Behaviors of the rock mass including convergence and displacement around tunnel were measured with construction works and the crack width in concrete wall was also monitored for controlling allowable limits. The results can be summarized as follow : 1. The allowable blast vibration level in structure site is less 1.0cm/sec for highway concrete, 0.5 cm/sec for gas pipe, water pipe and building housing and 0.3 cm/sec for automatic control system machine. 2. The convergence displacement, single rod extensometer and multi rod extensometer around tunnel and cracks in concrete wall were measured, it was confirmed that the measured values were converged within allowable level. 3. The empirical formular of ground vibrations with 90% confidence lines for PD-3 was given as follow. $$V_{90%}=45.549({\frac{D}{\sqrt{W}}})^{-1.353}$$

• Geomechanics and Engineering
• /
• 제15권4호
• /
• pp.973-986
• /
• 2018

The objective of this paper is to present abacuses obtained from a parametric study of deep-lined tunnels using a numerical finite element model. This numerical model was implemented in software GEOMEC91, which is a two-dimensional axisymmetric model that considers the progress of excavation and the placing of the lining through the activation and deactivation of elements. It is adopted a step of excavation constant (1/3 of radius), constant velocity and circular cross section along the tunnel axis. It is used for rock mass a viscoplastic constitutive law with von-Mises criterion of viscoplasticity without hardening whose deformation rate over time is given by the Bingham model. The lining uses a linear elastic constitutive law. In total are 1716 analysis presented in 60 abacuses that show the value of ultimate convergence ($U_{eq}$) due to tunneling speed. In addition, it is shown an example of the use of the abacuses to determine the ultimate convergence ($U_{eq}$) of the tunnel and pressure ($P_{eq}$) on the lining.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.664-670
• /
• 2010

The study on mechanical behavior of the structure at the site includes experimental method and numerical analysis method. Experimental method is categorized into true-scale test and laboratory model test. A laboratory model test is to monitor the failure mechanism with a model simulated similar with a real ground so as to identify the quantitative result, while a true-scale model test is the approach which enables to identify the potential problems that may occur with a simulated construction situation similar with a real site circumstance. Thus this study was intended to carry out the experimental test of non open-cut excavation by pipe roof method which is mostly common in domestic sites. as well as was aimed at identifying the ground behavior occurred during pipe penetration using laboratory model test. Appropriate reduced-scale model was selected, taking into account of domestic geological characteristics and operation characteristics of traditional and high-speed rail trains and the qualitative evaluation of displacement was carried out based on a certain ground loss volume depending on excavation after categorizing trackbed settlement pattern by depth of top soil.

• 화약ㆍ발파
• /
• 제22권3호
• /
• pp.65-70
• /
• 2004

최근 신설되는 도로의 경우 고속화/직선화로 인하여 터널의 연장 및 평균터널 길이, 3차선이상의 대 단면 터널이 날로 증가하고 있어 이에 따른 굴착 효율 극대화가 필요한 시점에 있다. 사패산 터널은 약 4km의 4차선 대단면 도로터널로, 환경문제로 인해 늦춰진 공기를 단축시키기 위하여 터널 굴착 시 굴진효율에 가장 큰 영향요소인 굴진장과 여굴관리, 발파효율의 개선을 위한 다양한 신 공법이 적용되고 있다. 본 논문은 당 현장에서 시도되고 있는 신 공법 중, 새로운 형태의 폭약인 Bulk 폭약에 대하여 소개하고, Bulk 폭약의 대 단면 터널 적용에 대한 효율을 검증하고자 하였다.

• Geomechanics and Engineering
• /
• 제21권2호
• /
• pp.153-164
• /
• 2020

Tunnel excavation in shallow soft ground conditions of urban areas experiences inevitable surface settlements that threaten the stability of nearby infrastructures. Surface settlements during shield TBM tunneling are related to a number of factors including geotechnical conditions, tunnel geometry and excavation methods. In this paper, a database collected from a construction section of Hong Kong subway was used to analyze the correlation of settlement-inducing factors and surface settlements monitored at different locations of a transverse trough. The Pearson correlation analysis result revealed a correlation between the factors in consideration. Factors such as the face pressure, advance speed, thrust force, cutter torque, twin tunnel distance and ground water level presented a modest correlation with the surface settlement, while no significant trends between the other factors and the surface settlements were observed. It can be concluded that an integrated effect of the settlement-inducing factors should be related to the magnitude of surface settlements.

• 터널과지하공간
• /
• 제17권3호
• /
• pp.216-224
• /
• 2007

화약의 동적 충격에너지를 이용하는 발파굴착은 매우 효율적인 터널굴착방법이다. 그러나 진동과 암소음 등의 발파공해가 발생하는 문제점이 있다. 최근 연구를 통해 노치공을 이용한 선균열 암굴착방법은 발파공해와 터널의 여굴을 상당히 줄일 수 있는 것으로 확인되었고 이에 따라 본 연구에서는 노치발파공의 성형을 위한 노치장비개발에 관한 연구를 수행하였다. 노치공을 효율적으로 성형하기 위해 노치비트의 길이, 높이 등을 다양하게 변화시켜 실험을 수행하여 최적화하였고, 천공속도, 천공정밀도를 높이기 위한 천공비트, 노치비트, 아답타, 노치 가이드로 이루어진 노치비트 시스템을 개발하였다.