• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.4069-4074
• /
• 2010

Phase change of calcium carbontae crystals in crystallization of precipitated calcium carbonate was researched by adding additives such as ethylenediaminetetraacetic acid(EDTA), diethylenetriaminepentaacetic acid(DTPA), citric acid(CIT) and pyromellitic amid(PMA). At low temperature $20^{\circ}C$, calcite crystal was made. At high temperature $80^{\circ}C$, aragonite crystal was made without additives. At middle temperature $40^{\circ}C$ and $60^{\circ}C$, Aragonite crystal also made by adding EDTA, DTPA. The crystal growth of Aragonite was retarded by the presence of CIT, PMA and the single phase of calcite was made. It was found that additives were important factors to make the single phase of calcium carbonate.

• Environmental Analysis Health and Toxicology
• /
• v.15 no.3
• /
• pp.99-106
• /
• 2000

Ethylenediaminetetraacetic acid (EDTA) and nitrilotriacetic acid (NTA) are various applied as chelating agents for metal ions, then they are widely used in many industrial processes and domestic products. A method is described for the determination of EDTA and NTA in water samples by GC/MS . The reaction temperature, reaction time and pH for esterification of EDTA and NTA were investigated using 10% sulfuric acid-methanol, ethanol and propanol. Optimum conditions were obtained by the esterification in 80$\^{C}$ for 1hr with ethanol. Method detection limits of ethylated EDTA and NTA in the 200 ml of water samples were 0.05 ng/ml, respectively, EDTA and NTA could be determined in the range of 0.05∼23.6 and 0.05∼7.0 ng/ml in treated water, and in the range of 0.06∼25.0 and 0.05∼6.40 ng/ml in raw water respectively. Risk assessments with EDTA and NTA exposure by drinking water ingestion were carried out. Based on the results of analysis, chronic daily intakes of EDTA and NTA would be less than the value of acceptable daily intake or tolerable daily intake.

• Clinical and Experimental Pediatrics
• /
• v.48 no.6
• /
• pp.675-677
• /
• 2005

Pseudothrombocytopenia is usually associated with anticoagulant ethylene diaminetetraacetic acid (EDTA). The platelet clumping that occurs in EDTA-dependent pseudothrombocytopenia (EDPT) can sometimes be prevented by the use of other anticoagulants such as heparin or sodium citrate. As an alternative, we used kanamycin before or after the withdrawal of EDTA-anticoagulated blood in a 6-year-old boy with EDPT. Kanamycin used supplementarily during the differentiation of EDPT effectively prevented platelet clumping.

• Journal of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.121-127
• /
• 1968

In the oligomerization of p-aminophenol under the catalytic action of the metallic complexes, the effects of the ligands are studied. When the initial velocity of $O_2$ uptake at pH 8 using Fe(Ⅲ) as the central metal and N-hydroxylethylethylenediaminetriacetic acid (HEDTA), ethylenediaminetetraacetic acid (EDTA), diethylenetriaminepentaacetic acid (DTPA), 1,2-cyclohexanediaminetetraacetic acid(CyDTA) as the ligands respectively are compared, the velocities are as the following order: HEDTA > EDTA > DTPA > CyDTA. Further when the effect of the ligands, nitrilotriacetic acid (NTA), HEDTA, EDTA, and DTPA, on the yields of oligomers are compared, the result shows as the following order: NTA > HEDTA > EDTA > DTPA. These are nearly reverse order of the stability constants of the complexes. In order to determine the composition of the mixed complexes at the initial step, the method of continuous variation is used, and it is found that the composition ratio of Fe-EDTA complex to monomer in the mixed complexes is one at pH 5-8 range. It is also found that at pH 9 or in the more alkaline range, side reactions occur to form water soluble dimer of quinone type and the catalytic action of the metallic complex markedly decreases on account of the hydrolysis of the central metal by the $OH^-$ ion.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.905-909
• /
• 2010

Magnetic beads (Dynabeads$^{(R)}$) embedded in ~1 micron size polystyrene beads bearing surface carboxylic acid groups were modified with aminobenzyl ethylenediaminetetraacetic acid (ABEDTA) to concentrate or separate metal ions using pH gradients on micro and nano scales. The immobilization of ABEDTA was achieved by amide formation. The presence of the metal chelating functional group in the fully deprotonated form was confirmed by FT-IR. The chelation efficiency of beads was tested by determining metal ions in supernatant using GFAAS when pH gradients from 3 to 7. Mixtures of Cu and Mg and of Cd and Mn (at 10 ng/mL of metal) were separated as the difference in formation constant with the functional group of ABEDTA. The separation was repeated twice with relative standard deviation of <18%. A polydimethylsiloxane (PDMS) microchip column packed with EDTA-coated magnetic beads was optimized to concentrate metal ion for practical applications by eluting a Cu solution of micro scale at pH 3.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.307-310
• /
• 2004

Micellar enhanced ultrafiltration (MEUF) is a surfactant-based separation process and it can remove heavy metal ions from aqueous stream effectively. However, it is necessary to recover and reuse surfactants for economic feasibility because surfactant is expensive. Foam fractionation was investigated for both anionic and cationic surfactant recovery. Chelating agent such as ethylenediaminetetraacetic acid (EDTA) was studied for the separation of heavy metals from surfactant solution. Anionic surfactants bound with heavy metals can be recovered by lowering pH (acidification). In this study, citric acid and imminodiacetic acid (IDA) were applied to release copper from sodium dodecyl sulfate (SDS) micellar solution and compared with EDTA. Precipitation of copper by ferricynide and sodium sulfide were also investigated. As a result, ca. 100 % of copper was released from SDS micellar solution by 5 mM of EDTA and citric acid. And 3.3 mM of ferricyanide formed precipitate with 82.7 % of copper. 5 mM of IDA and sodium sulfide released or formed precipitate 82.5 % and 58.9 % of copper, respectively. Citric acid is harmless to environments and ferricyanide precipitates with Cu easily. Therefore, it is considered that citric acid and ferricyanide have competiveness over a famous chelating agent, EDTA, for the separation of Cu from SDS solution.

• Journal of Radiation Protection and Research
• /
• v.36 no.4
• /
• pp.223-229
• /
• 2011

Ba is the most useful element to get the $Ba(Ra)SO_4$ precipitate. However, when the high concentrations of ions such as sulfate, calcium are existed in the leachate of phosphogypsum stack, it is difficult to get the $Ba(Ra)SO_4$ precipitate. Since this reason, the developed method for the Ba coprecipitate using EDTA was performed to determine the $^{226}Ra$ concentration in the high sulfate sample. The average concentration of $^{226}Ra$ in a leachate of phosphogypsum using this method was 0.102 $Bq{\cdot}kg^{-1}$ and the minimal detectable activity is 3.4 $mBq{\cdot}kg^{-1}$. The $mBq{\cdot}kg^{-1}$ method was 0.102 $Bq{\cdot}kg^{-1}$ and the minimal detectable activity is 3.4 $mBq{\cdot}kg^{-1}$. The $^{226}Ra$ stock solution and the CRM (Certified Reference Material) were analyzed to verify this method. In analyzed $^{226}Ra$ stock solution, bias with added concentration was approximately 1% and the correlation curve between $^{226}Ra$ concentration in simulated standard sample and measured $^{226}Ra$ concentration showed good agreement with a correlation coefficient ($R^2$) of 0.99. In analyzed CRM, maximum bias with reference value was 5.8% (k=1) and the analytical results were in good agreement with the reference value.

• Membrane and Water Treatment
• /
• v.6 no.2
• /
• pp.141-160
• /
• 2015

This study aims to investigate the impacts of chemical cleaning on the performance of a reverse osmosis membrane. Chemicals used for simulating membrane cleaning include a surfactant (sodium dodecyl sulfate, SDS), a chelating agent (ethylenediaminetetraacetic acid, EDTA), and two proprietary cleaning formulations namely MC3 and MC11. The impact of sequential exposure to multiple membrane cleaning solutions was also examined. Water permeability and the rejection of boron and sodium were investigated under various water fluxes, temperatures and feedwater pH. Changes in the membrane performance were systematically explained based on the changes in the charge density, hydrophobicity and chemical structure of the membrane surface. The experimental results show that membrane cleaning can significantly alter the hydrophobicity and water permeability of the membrane; however, its impacts on the rejections of boron and sodium are marginal. Although the presence of surfactant or chelating agent may cause decreases in the rejection, solution pH is the key factor responsible for the loss of membrane separation and changes in the surface properties. The impact of solution pH on the water permeability can be reversed by applying a subsequent cleaning with the opposite pH condition. Nevertheless, the impacts of solution pH on boron and sodium rejections are irreversible in most cases.

• Applied Chemistry
• /
• v.15 no.1
• /
• pp.25-28
• /
• 2011

A highly sensitive spectrofluorimetric method was developed for the determination of levodopa based on the formation of a ternary complex with Eu³⁺ in the presence of ethylenediaminetetraacetic acid. It was found that this complex manifests intense fluorescence at 591 and 613 nm with excitation at 372 nm and maximum intensity was obtained at 613 nm. Under the optimum conditions, the enhanced fluorescence intensity was proportional to the concentration of levodopa over the range of 3×10^-9-2.5×10^-7 mol L^-1 with limit of detection (LOD) of 4.37×10^-10 mol L^-1. The method offers higher sensitivity and selectivity which could be effectively applied for the determination of levodopa in pharmaceutical and biological samples.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.117-118
• /
• 2013

증기발생기 화학세정 모사 장치를 이용하여 고농도 화학세정(EPRI/SGOG) 용액인 EDTA(20%)가 인위적으로 제작한 결합 시편에 미치는 영향 평가를 수행하였다. 평가 방법은 세정 전 후 표면 산화막 성분, ECT 분석값 비교, 증기발생기 구성 재료 부식률를 이용하였다. 화학세정 전후 부식률은 A508은 $8.023{\mu}m$, Alloy 600(HTMA)은 $0.007{\mu}m$이며 갈바닉 시편의 경우 $63.193{\mu}m$로 모두 부식 허용치 이내이다. 표면 산화막 성분 및 ECT 분석값 역시 변함이 없었다. 이와 같은 결과로 화학세정 용액인 EDTA는 결함 튜브에 미치는 영향이 없는 것으로 판단된다.