• Restorative Dentistry and Endodontics
• /
• v.44 no.3
• /
• pp.23.1-23.9
• /
• 2019

Objectives: The aim of this study was to investigate the microshear bond strength (${\mu}SBS$) of different universal adhesive systems applied to hybrid computer-aided design/computer-aided manufacturing (CAD-CAM) restorative materials repaired with a composite resin. Materials and Methods: Four types of CAD-CAM hybrid block materials-Lava Ultimate (LA), Vita Enamic (VE), CeraSmart (CS), and Shofu Block HC (SH)-were used in this study, in combination with the following four adhesive protocols: 1) control: porcelain primer + total etch adhesive (CO), 2) Single Bond Universal (SB), 3) All Bond Universal (AB), and 4) Clearfil Universal Bond (CU). The ${\mu}SBS$ of the composite resin (Clearfil Majesty Esthetic) was measured and the data were analyzed using two-way analysis of variance and the Tukey test, with the level of significance set at p < 0.05. Results: The CAD-CAM block type and block-adhesive combination had significant effects on the bond strength values (p < 0.05). Significant differences were found between the following pairs of groups: VE/CO and VE/AB, CS/CO and CS/AB, VE/CU and CS/CU, and VE/AB and CS/AB (p < 0.05). Conclusions: The ${\mu}SBS$ values were affected by hybrid block type. All tested universal adhesive treatments can be used as an alternative to the control treatment for repair, except the AB system on VE blocks (the VE/AB group). The ${\mu}SBS$ values showed variation across different adhesive treatments on different hybrid CAD-CAM block types.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.1
• /
• pp.49-56
• /
• 2019

Generalized severely worn dentition causes occlusal disharmony, esthetic problems, and temporomandibular joint disorders. In order to solve these problems, it is necessary to make a precise analysis of vertical dimension and treatment plans considering it. This case report demonstrates the complete mouth rehabilitation of a 58-year-old male patient with a lot of worn teeth by increasing vertical dimension. Provisional restorations were cemented and after 4 months of evaluation for patient's compliance, permanent prostheses were fabricated. With these treatments, functionally and esthetically satisfactory results were obtained.

• Journal of the Korea Convergence Society
• /
• v.6 no.3
• /
• pp.59-64
• /
• 2015

A hinge is the most important part constituting door. Nowadays, the hinge is subdivided all the more under the category of the function, shape and material and is enlarged at the usage. Therefore, it is necessary to improve the manufacturing technique and more specialized design must be developed. As the structural analysis is carried on the hinge model mounted at door in this study, the deformation, stress distribution and fatigue life are analyzed when the door is applied with uniform force. The durabilities of hinge models due to each shape are anticipated through this study. It is thought to be contributed at developing and designing more improved hinge model with durability. And it is possible to be grafted onto the convergence technique at design and show the esthetic sense.

• Journal of the Korea Convergence Society
• /
• v.9 no.8
• /
• pp.179-184
• /
• 2018

The driving methods of car are front wheel drive, rear wheel drive and four wheel drive. At driving methods, constant velocity joint is the most important part at carrying out two functions for converting to the direction which the driver wants and transferring the power to wheels. At driving on the road, the impact can be applied to the parts transmitting power according to the state of road surface. In this study, each models of three constant velocity joints whose shaft length are different respectively were modelled with CATIA and the structural and fatigue analyses were carried out by using ANSYS. This study result is thought to be the useful material at designing the constant velocity joint with the durability against impact. And it is possible to be grafted onto the convergence technique at the design of constant velocity joint and show the esthetic sense.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.6
• /
• pp.838-849
• /
• 2000

The purpose of this study was to investigate use and purchase behavior of sleeping wear for summer. Subjects in this study were composed of 591 males and females aged from twenties to fifties, living in Taejon and Chongju. For data analysis, descriptive analysis, $\chi$$^2$-test, t-test, ANOVA, and factor analysis were used. The results are as follows. First, subjects used sleeping wear(a night gown and pajamas), and home wear(T-shirts and sweat suit with zippered top) with similar rates. The subjects, who are females, married, older and have professional jobs, owned sleeping wear such as a night gown and pajamas more than home wear. Also, the mean of using pajamas was the highest, and they were satisfied with them more than others who didn't wear them. Second, one-third of consumers purchased sleeping wear once a year in a specialty store. Consumers mainly searched for information regarding sleeping wear in the display section. Most consumers weren't influenced by others when they made their purchases. When consumers decided to purchase a product, they considered six criteria such as fabric/management, wearing/fitness, esthetic, service, symbolic status, and economic for evaluating. Among them, the factor wearing/fitness was considered the most important. These results imply that consumers would be conscious of sleeping wear even though sleeping wear and home wear are used interchangeably. In addition, consumer behavior concerning sleeping wear is different from their characteristics such as sex, age, occupation, the level of education, and marital state. Therefore, the markets with sleeping wear would be able to be segmented based on consumers’characteristics. Also, marketers should focus on distribution channels to reform the markets of sleeping wear, that is, they may offer products in specialty stores. Additionally, market managers would be able to concentrate on visual merchandising in stores in order to increase brand awareness and market share.

• The Journal of the Korea Contents Association
• /
• v.17 no.3
• /
• pp.609-623
• /
• 2017

This study intends to find the meaning of signs' configuration in Korean and British school uniform advertisements, to investigate through reproduction of such signs what influences on students' identity issues are, and to discover the cultural significance of the both nations by analysing sexuality discourses around these ads. The authors apply semiotic analysis methods such as two-stage meaning structure and critical discourse analysis. The research subjects are School uniform advertisements of both in South Korea and in the UK. Through this study, women objectification, the power imbalances between men and women, and child erotica were revealed, and also the uniforms of the meaning and value turned out to be distorted. In addition, on the basis of critical discourse analysis, two nations' school uniform ads, which heavily focused on sexual objectification and commercialism, transformed aspects of unusual esthetic value, reminded of Lolita fantasy, implied wrong justification of deviant sexual orientation, and, caused Korean and British students the confusion of sexual identity and values.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.281-286
• /
• 2019

To repair the underside of the car, a repairman has to enter under the car body. But this work can make it difficult for him to fix it and the injuries can occur. To solve these difficult problems, the developed equipment is the automotive lift. In this study, three kinds of lift models 1, 2 and 3 were designed and the material properties of the structural steel were applied. As the same load were applied under the same conditions on all models, the structural analyses were conducted. Models 2 and 3 were shown to have the structural deformation less than model 1. Also, models 2 and 3 were shown to be more stable than model 1 structurally. By utilizing the design data on a convergence research through durability analysis according to the configuration of automotive lift obtained on the basis of this result, the esthetic feeling can be shown by being converged onto the automotive repair equipment parts at actual life.

• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.93-103
• /
• 2008

This research is designed for a consumer, not a supplier when it was designed. And the purpose is to present the reference data which is in order to improve the curriculum by analyzing the present subject of the curriculum. The research collected the curriculum for Dental Technology from a total of 20 schools --3-year colleges and 4-year colleges-- all in Korea. And we analyzed the average credits of subjects from students. As a result of this analysis, we get the conclusion below: 1. In a distribution which students answered about each subjects; Dental esthetic, Dental morphology I II, Dental morphology practice I II, and Seminar don't have many credits and mostly have a converged tendency in high points, according to the arithmetic mean of the major basis subjects. 2. In an analysis of the correlation which is based on the distinction of sex; Dental ceramics practice III, Medical terminology, Seminar, and The major basis subjects have a meaningful difference. (${\rho}$ < 0.05) 3. In an analysis of the correlation which is based on an age; The major basis subjects, and the application subjects have meaningful difference. (${\rho}$ < 0.05) 4. In a correlation coefficient between subjects; The correlation coefficient of the major application subjects is higher than the major basis subjects. According to the student ? t, we found that the level of significance is ${\rho}$ < 0.001, which is meaningful. We feel that Department of Dental Technology also highly need to design, and conduct focusing on a consumer who is working at the society, not a supplier. And we need to increase or decrease credits which have a meaningful difference.

• Journal of Technologic Dentistry
• /
• v.29 no.2
• /
• pp.49-64
• /
• 2007

This research collected the curriculum for Dental Technology from a total of 20 schools -3-year colleges and 4-year colleges- all in Korea. And we analyzed the average credits of subjects from students. As a result of this analysis, we get the conclusion below: 1. In a distribution which students answered about each subjects; Seminar, Dental morphology I II, Dental morphology practice I II, and Dental devices & instruments don't have many credits and mostly have a converged tendency in high points, according to the arithmetic mean of the major basis subjects. 2. In an analysis of the correlation which is based on the distinction of sex: Complete denture prosthodontics I II III, Dental orthodontics I II, Dental orthodontics practice I II, and Dental orthodontics & practice III have a meaningful difference. ($\rho$< 0.05 ) 3. In an analysis of the correlation which is based on an age The major basis subjects -Introduction to dental technology, Dental esthetic, and Dental casting procedure-, and the major application subjects -Crown and bridge prosthodontics practice, Complete denture prosthodontics, Dental orthodontics, Dental orthodontics practice, and Operative dentistry laboratory technology- have meaningful difference. ($\rho$< 0.05 ) 4. In a correlation coefficient between subjects; The correlation coefficient of the major application subjects is higher than the major basis subjects. According to the student - t, we found that the level of significance is $\rho$< 0.001, which is meaningful. We feel the lack of a limitation which we didn't survey all students who are major in Department of Dental Technology. And we also feel that we'd better to consider not only students who being in college but also graduated students.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.2
• /
• pp.430-440
• /
• 1998

This study was performed to establish the cephalometric standards and to compare measurement of Korean children in the Field I, II, III, IV, V, VI to Japanese and Caucasians by the Ricketts' analysis. Lateral cephalograms of 24 males and 27 females with normal occlusion and acceptable profile 9 years of age were obtained and statistically analyzed. 1. Norms of Korean males, females and both sexes at 9 years old were established. 2. Significant differences between male and female exist in incisor overjet, maxillary incisor protrusion, mandibular incisor inclination, cranial deflection, corpus length. Maxillary incisor of male was more protrude and overjet was larger than female 3. Korean was similar to Japanese but different from Caucasian. Compare with facial axis and facial depth, chin was retruded dolichofacial pattern and due to large mandibular plane angle and small corpus length, mandibular plane was inclined and mandible body was short. Compare with porion location, ramus position and posterior facial height, ramus was long and located posterior. Compare with maxillary depth and maxillary height, maxilla was located posterior and inferior. The distance between the upper molar and PTV was short, the amount of distalization is limited. Maxillary and mandibular incisor were more protruded and also lower lip was more protruded to esthetic line 4. In comparison between 9 and 11 years old, growth changes of facial depth, mandibular plane angle, corpus length and upper molar position were larger than that of Japanese and Caucasians.