• 대한전자공학회논문지
• /
• 제16권5호
• /
• pp.12-17
• /
• 1979

DPSKtlsgheodursodp 상가성 잡음과 간섭도가 존재할 경우, 다상 DPSK신호의 의 수신오율에 대한 이론적 해석을 행했다. 이에는 수신합성위상의 확율밀도함수(pdf)를 이용, 다상 DPSKtls호의 수신오율를 구하기 위한 간결한 일반식을 도출하여 2상, 4상 및 8상에 대해 수치계산후 상응한 CPSK 결과와 비교검토를 행했다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.1051-1059
• /
• 1992

Two types of digital repetitive control systems are analyzed and designed to reduce the error spectrum including not only harmonic but also non-harmonic components. First, a novel gain scheduling algorithm is suggested for conventional and modified repetitive controller is scheduled to reduce the infinite norm of error in frequency domain. For this, the relative error transfer function is mewly defined as the ratio of the error spectrum for the system with a repetitive controller to the error spectrum for the system with a repetitive controller to the error spectrum for the system without a repetitive controller. Secondly, as an alternative of a repetitive control system with the gain scheduling, a repetitive control system with higher order repetitve function is analyzed and designed, where instead of equal weightings, weightings of the higher order repetitive function is determined in such a way that the infinite norm of relative error transfer function is minimized. To show the validities of proposed methods, computer simulation results are illustrated for a typical disk drive head positioning servo system.

• 제어로봇시스템학회논문지
• /
• 제4권1호
• /
• pp.56-61
• /
• 1998

The velocity measurement error in the velocity-aided SDINS on the maneuvering vehicle is unavoidable and degrades the performance of the SDINS. The characteristics of the velocity measurement error can be modeled as a random bias. This paper proposes a new method for estimating the velocity measurement error in the SDINS. The generalized likelihood ratio test is used for detecting the error and a modified separate-bias Kalman filter in the feedback configuration is suggested for estimating the magnitude of the velocity measurement error.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권1호
• /
• pp.40-52
• /
• 2020

In this paper, we consider a precoder design problem for multiuser interference channel. Most of the conventional schemes for precoder design utilize a signal-to-interference-plus-noise ratio (SINR) as a cost function. However, since the SINR metric of a desired transmitter-receiver pair is a function of precoding vectors of all transmitters in the multiuser interference channel, an analytic closed-form solution is not available for the precoding vector of a desired transmitter that maximizes the SINR metric. To eliminate coupling between the precoding vectors of all transmitters and to find a closed-form solution for the precoding vector of the desired transmitter, we use a signal-to-leakage-plus-noise ratio (SLNR) instead as a cost function because the SLNR at a transmitter is a function of the precoding vector of the desired transmitter only. In addition, channel estimation errors for undesired links are considered when designing the precoding vector because they are inevitable in a multiuser interference channel. In this case, we propose a design scheme for the precoding vector that is robust to the channel estimation error. In the proposed scheme, the precoding vector is designed to maximize the worst-case SLNR. Through computer simulation, we show that the proposed scheme has better performance than the conventional scheme in terms of SLNR, SINR, and sum rate of all users.

• 전기학회논문지P
• /
• 제57권1호
• /
• pp.6-13
• /
• 2008

National standard system for calibrating current transformer(CT) up to primary current of 20,000A have been established. The system consists of 20,000 A AC high current source, CT comparator, standard CT, CT under test and CT burden. An AC high current is applied tn the primary windings of both the standard CT and the CT under test, and then the CT comparator measures the ratio error and the phase displacement by comparing the secondary currents of the two transformers. As a validity check for 20,000 A CT calibration system, the comparison with the two national standard institutes(NMIs) has been performed using same CTs. The comparison results of the CTs are consistent with those measured at two NMIs within 0.004 % for ratio error and 0.1 min for phase displacement in the primary current ranges of Ip = 10 - 20,000 A with a secondary current of Is = 5 A.

• 한국통신학회논문지
• /
• 제10권3호
• /
• pp.135-146
• /
• 1985

임펄스성 잡음과 동일 채널 간섭이 존재하는 환경하에서 페이딩채널을 통과하는 MSK(Minimum Shift Keying)신호의 오율의 일반식을 유도하여 반송파 대 잡음 전력비(CNR), 반송파 대 간섭파 전력비(CIR), 임펄스지수, 가우스성 잡음 대 임펄스성 잡음 전력비 및 페이딩 지수를 파라미터로 하여 시스템의 성능을 오율적 측면에서 평가했다. 해석겨로가, 강한 페이딩하에서는 에러가 주로 가우으성 잡음에 의하여 발생되고 페이딩이 약해지면 가우스성 잡음에 의한 영향이 크게 줄어드는 반면 임펄스성 잡음의 영향은 그다지 줄지 않는다는 것을 알아냈다. 또 신호가 페이딩을 받게 되면 미약한 간섭파일지라도 수신 시스템의 성능을 크게 저하시킨다는 것을 알 수 있다.

• 한국통신학회논문지
• /
• 제17권11호
• /
• pp.1320-1331
• /
• 1992

부분대역 간섭 환경하에서 m-분포 페이딩 채널을 통해 수신되는 반복다이버시티 방식의 FH/MFSK 신호에 대한 오율식을 유도하고 이를 수치계산하여 비트 에너지 대 잡음 전력 밀도 비 $(E_b/N_0)$, 비트에너지 대 간섭 전력 밀도 비 $(E_b/N_1)$, 페이딩 지수(m), 부분대역 간섭의 대역 점유율$(\rho)$, 반복 정송수(L), 신호와 간섭 사이의 전력 상관계수 값을 함수로 하여 그림으로 나타내고 이를 분석했다. 본 논문에서는 이동무선 채널에서 발생하는 페이딩에 대처하기 위해 송신기에서 반복 전송 다이버시티를 사용할 때를 생각했는데 다이버시티를 사용할 때와 사용하지 않을 때의 오율을 비교한 결과 반복 전송 다이버시티가 페이딩에 매우 효과적이라는 것을 알 수 있었으며 다이버 시티 기법에 의해 얻어지는 오율의 개선정도를 알아내었다. 얻어진 결과로 부터 부분대역 간섭의 대역 점유율인 $\rho$가 작아지면 작아질수록 오율이 열화되는 것으로 보아 전대역 간섭보다는 부분대역 간섭의 영향이 더 크다는 것을 알 수 있었다. 아울러 $E_b/N_1$가 작고 $\rho$가 작을때는 페이딩의 심도가 깊으면 깊을수록 반복다이버 시티를 도입하므로서 오율특성의 개선이 현저하다는 것도 알수 있었다.

• 대한전자공학회논문지
• /
• 제6권3호
• /
• pp.8-11
• /
• 1969

In the precision measurement of the voltage standing wave ratio (VSWR) or reflection coefficient by means of the slotted line technique, one of the important factors is the maximum error due to the discontinuities and multi-reflection in the slotted line. Particularly, this error becomes a critical factor when the VSWR or the reflection coefficient to be measured is very small. In this paper, the exact expression of this error is obtained by means of the Signal flow graph method.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.409-421
• /
• 2003

The hierarchical recursive local-correlation PIV algorithm with CBC (correlation based correction) method was employed to increase the spatial resolution of PIV results and to reduce error vectors. The performance of this new PIV algorithm was tested using synthetic images, PIV standard images of Visualization Society of Japan, real flows including ventilation flow inside a vehicle passenger compartment and wake behind a circular cylinder with riblet surface. As a result, most spurious vectors were suppressed by employing the CBC method, the hierarchical recursive correlation algorithm improved the sub-pixel accuracy of PIV results by decreasing the interrogation window size and Increased spatial resolution significantly. However, with recursively decreasing of interrogation window size, the SNR (signal-to-noise ratio) in the correlation plane was decreased and number of spurious vectors was increased. Therefore, compromised determination of optimal interrogation window size is required for given flow images, the performance of recursive algorithm is also discussed from a viewpoint of recovery ratio and error ratio in the paper.

• Communications for Statistical Applications and Methods
• /
• 제18권4호
• /
• pp.537-548
• /
• 2011

In this paper following Singh et al. (2008), we propose a modified ratio-product type exponential estimator to estimate the finite population mean $\={Y}$ of the study variable y in presence of non-response in different situations viz. (i) population mean $\={X}$ is known, and (ii) population mean $\={X}$ is unknown. The expressions of biases and mean squared error of the proposed estimators have been obtained under large sample approximation using single as well as double sampling. Some realistic conditions have been obtained under which the proposed estimator is more efficient than usual unbiased estimators, ratio estimators, product estimators and exponential ratio and product estimators reported by Rao (1986) and Singh et al. (2010) are found to be more efficient in many situations.