• 제목/요약/키워드: equilibrium factor

검색결과 418건 처리시간 0.022초

개별요소법과 한계평형법을 이용한 보은지역 암반사면 안전율 비교해석 (Comparison Analysis of Factor of Safety on Rock Slope in Boeun Region Using Distinct Element Method and Limit Equilibrium Method)

  • 이지수;유광호;박혁진;민경덕
    • 한국지반공학회논문집
    • /
    • 제19권4호
    • /
    • pp.33-41
    • /
    • 2003
  • 연구대상 사면은 충북 보은군 보은읍 도로공사구간 내의 절취사면으로 절취시공 후 암반사면내의 일부 구간에서 평면파괴로 인한 사면 붕괴가 발생하였다. 이 구간에서는 파괴면과 유사한 방향성을 갖는 불연속면이 암반사면 내에 다수 분포하여 추가 붕괴가 예상되는 불안정한 상태이다. 따라서, 본 사면에 대하여 암반사면의 안정성 해석에 보편적으로 사용되는 SMR, 평사투영법, 한계평형법 및 수치해석 등의 기법을 이용하여 사면의 안정성을 해석하였다. 사면의 안정성평가에 보편적으로 사용되는 한계평형법은 간단한 계산에 의해 사면의 안정성을 평가할 수 있는 장점이 있으나 파괴 활동면을 가정할 수 없는 단일 안전율에 의해 전체 사면의 안정성을 평가하는 단점이 있다. 따라서, 본 연구에서는 개별절리를 고려하여 사면의 안정성을 평가하는 전단강도 감소기법으로부터 안전율을 계산하였으며, 이를 한계평형해석의 결과와 비교ㆍ분석하였다. 또한 본 사면내에 지하수 영향을 고려하고 보강공법을 적용하여 종합적인 안정성을 검토하였다.

플라즈마 MHD 평형의 수치해석 (Numerical analysis of plasma MHD equilibrium)

  • 이홍식;황기웅
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1988년도 추계학술대회 논문집 학회본부
    • /
    • pp.206-209
    • /
    • 1988
  • Fixed boundary MHD static equilibrium for the axisymmetric toroidal plasma is analyzed numerically. The Grad-Shafranov equation is solved using FFM. The toroidal current tenn is expressed by plasma pressure p($\psi$) and toroidal field function g($\psi$). The numerical results are compared to the Solovev analytic equilibrium for the verification of the analysis. For SNUT-79 tokamak device in Seoul National University, flux surfaces and toroidal current profiles according to the variation of p and g profiles are observed. Also the safety factor q and average beta are obtained.

  • PDF

얕은 정현형(正弦型) 아치의 분기좌굴에 관한 연구 (A study on the bifurcation buckling for shallow sinusoidal Arches)

  • 김승덕;권택진;박지윤
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1998년도 봄 학술발표회 논문집
    • /
    • pp.457-464
    • /
    • 1998
  • The equilibrium path of shallow sinusoidal arches supported by hinges at both ends is investigated. The displacement increment method is used to get the solution of the nonlinear differential equations for these structures and to plot the equilibrium paths by the results. Using the equilibrium paths, the relations between the position of buckling point and buckling type for the case of sinusoidal distributed loads are inferred. From the result that the buckling type changes according to the normalized rise of arch, it is also shown that the arch rise is the governing factor to stability regions

  • PDF

아파트의 가격형성 메커니즘에 관한 연구 (A Study on the Equilibrium-Pricing Mechanism of Apartment)

  • 정재영;윤태권
    • 한국건축시공학회지
    • /
    • 제8권6호
    • /
    • pp.65-74
    • /
    • 2008
  • The aim is to get comprehensive view point for the price of apartment. Apartment construction cost is the sun of land cost and building cost. Land price reflects the value of location where building stands. When the gap between price and affordability is narrow enough, effective demand promote apartment construction. The today's trends of rising price, which began in apartment housing, spreads to real estates market and finally overall consumer price. Problem is that price is decided only by supplier's interest. Equilibrium-pricing is common process in housing market. However it is important to review hedonic price and the factor of housing services and focused on the affordability of demanders. AHP analysis was used to study real needs and preference of demanders and dealt with 200 interviewees with brief checklists. We found that social factor is more important than building cost or site development. Especially location of apartment is most important to affect environment quality and accessibility to facilities.

Modified Ammonia Removal Model Based on Equilibrium and Mass Transfer Principles

  • Shanableh, A.;Imteaz, M.
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권7호
    • /
    • pp.1920-1926
    • /
    • 2010
  • Yoon et $al.^1$ presented an approximate mathmatical model to describe ammonia removal from an experimental batch reactor system with gaseous headspace. The development of the model was initially based on assuming instantaneous equilibrium between ammonia in the aqueous and gas phases. In the model, a "saturation factor, $\beta$" was defined as a constant and used to check whether the equilibrium assumption was appropriate. The authors used the trends established by the estimated $\beta$ values to conclude that the equilibrium assumption was not valid. The authors presented valuable experimental results obtained using a carefully designed system and the model used to analyze the results accounted for the following effects: speciation of ammonia between $NH_3$ and $NH^+_4$ as a function of pH; temperature dependence of the reactions constants; and air flow rate. In this article, an alternative model based on the exact solution of the governing mass-balance differential equations was developed and used to describe ammonia removal without relying on the use of the saturation factor. The modified model was also extended to mathematically describe the pH dependence of the ammonia removal rate, in addition to accounting for the speciation of ammonia, temperature dependence of reactions constants, and air flow rate. The modified model was used to extend the analysis of the original experimental data presented by Yoon et $al.^1$ and the results matched the theory in an excellent manner.

하중전이를 고려한 앵커보강사면의 안정해석 (Stability Analysis of Anchored Slope Considering Load Transfer)

  • 김낙경;윤승권;김성규;주용선;박종식
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.1113-1124
    • /
    • 2009
  • The limit equilibrium method and finite element method have been commonly used to assess the stability of anchored slope. However, the existing limit equilibrium methods do not consider the load transfer of anchor and, if the potential failure surface crosses the bonded zone of anchors, the anchor loads are not included in computing the factor of safety. In this paper, simplified bishop method, one among several methods based on the limit equilibrium is used to develope the Excel Sheet program and the working load of anchor along the failure surface is calculated by Flamant's formula, proposed by Morlier and Tenier(1982). Additionally, the finite element analysis of anchored slope considering the load transfer is performed in order to compare with the result from the limit equilibrium analysis and analyze the reinforced effect of anchor. From this study, new modelling method that limits the reinforcing range and considers the load transfer is proposed and Excel Sheet program is developed. The factor of safety for several cases between PC STABL and Excel Sheet program is also compared for verification of the program.

  • PDF

상부자연사면 경사에 따른 토사사면의 안정성 평가에 관한 연구 (A Study on the Stability Evaluation of Soil Slope according to inclination of upper Natural Slope)

  • 이정엽;김진환;이종현;구호본
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2004년도 춘계학술발표회
    • /
    • pp.580-585
    • /
    • 2004
  • The purpose of this study is the stability evaluation of soil slope according to inclination of upper natural slope. Upper natural slope breeds loss of slope by inflow in slope of surface water by rainfal1 and f1uctuation of amount of materials in slope through method of cutting slope according to degree of inclination. Basis of standard inclination does not consider of inclination of upper natural slope and is presented uniformly. Therefore, in this study, analyzed stability of inclination of upper natural slope through limit equilibrium analysis. Result is same as following. First, safety factor through limit equilibrium analysis is almost direct decrease when gradient of soil slope is 1:1.2, 1:1.5. However, when gradient of soil slope is 1:1.0, 1:0.7, if sinclination of upper natural slope are $20^{\circ}$, it shows tendency that decrease of safety factor becomes low rapidly. Second, when when gradient of soil slope is fixed, inclination of upper natural slope increase tendency(maximum 3.0 times) that decrease of safety factor.

  • PDF

강도 감소법에 의한 지하수위를 고려한 FEM 사면안정해석 (Slope Stability Analysis Considering Seepage Conditions by FEM Using Strength Reduction Technique)

  • 김영민
    • 한국지반공학회논문집
    • /
    • 제20권8호
    • /
    • pp.97-102
    • /
    • 2004
  • 본 논문은 기존의 한계 평형법 보다 사면의 파괴거동을 잘 묘사할 수 있는 유한요소법에 의한 사면의 안전율을 결정하는 방법에 대하여 기술하였다. 특히, 지하수위를 고려하는 사면의 파괴거동을 강도감소법에 의한 유한요소법으로 산정하였다. 그 결과, 강도 감소법을 이용한 FEM해석방법이 사면의 안정해석에 대하여 파괴거동과 안전율을 구하는데 유효한 수단임을 보여 주었다. 그리고 지하수 상승경우와 지하수 급강하 사면의 경우에 대하여 자세히 분석하였으며, 한계평형법인 Bishop간편법 해석결과와 비교, 검토하였다.

경쟁적 전력시장에서 한계손실계수 적용시 기준모선 선정에 대한 연구 (A Study on the Selection of Slack Bus at Application of Marginal Loss-Factor in a Competitive Electricity Market)

  • 김상훈;이광호
    • 전기학회논문지
    • /
    • 제58권2호
    • /
    • pp.264-269
    • /
    • 2009
  • Marginal Loss Factor(MLF) is represented as the sensitivity of transmission loss, which is computed from the change of the generation at slack bus by the change of the load at the arbitrary bus. The MLF dependent on the selection of slack bus is one of the key factors affecting nodal pricing, Genco's profits, social welfare(SW) and Nash Equilibrium in a competitive electricity market. This paper addresses the methodology of slack bus selection by using Cournot model of Cost Based Pool market. Numerical results from sample cases show that the slack bus of MLF of the highest average is beneficial from the view points of SW.

강도 정수와 경사도 변화를 활용한 비탈면 해석기법에 따른 안전율 변화에 관한 연구 (A Study on Change of Safety Factor according to Slope Analysis Method using Strength Parameters and Slope Change)

  • 문효종;심정훈;정지수;이승호
    • 지질공학
    • /
    • 제27권1호
    • /
    • pp.31-40
    • /
    • 2017
  • 한계평형법에 의한 비탈면 안정성 해석은 활동면을 반복적인 해석 후 임계면을 설정하여 해석을 수행하고, 지반이 균질한 경우에만 적용이 가능하며, 안전율만 산정 할 수 있는 단점이 있다. 그러나 강도감소법을 적용한 해석에서는 수행자가 여러 가지 측면에 대해서 판단하고, 안전율을 산정 할 수 있는 장점 등이 있다. 본 연구에서는 동일한 크기의 비탈면을 대상으로 한계평형해석과 강도감소법을 활용하여 경사도 변화에 따른 두 해석법 간의 안전율 변화 양상과 점착력과 내부마찰각의 변화에 따른 안전율 변화 추이를 비교 분석하였다. 각각의 해석법에 따른 안정해석 분석 결과 지반내 응력, 변위와 변형률 등을 종합적으로 검토할 수 있는 강도감소법이 활용도가 높을 것으로 판단된다.