Proceedings of the Korean Geotechical Society Conference (한국지반공학회:학술대회논문집)
- 2009.03a
- /
- Pages.1113-1124
- /
- 2009
Stability Analysis of Anchored Slope Considering Load Transfer
하중전이를 고려한 앵커보강사면의 안정해석
- Kim, Nak-Kyung (Dept. of Civil & Environmental Engineering, Sungkyunkwan Univ.) ;
- Yun, Seung-Kwon (Dept. of Civil & Environmental Engineering, Sungkyunkwan Univ.) ;
- Kim, Sung-Kyu (Dept. of Civil & Environmental Engineering, Sungkyunkwan Univ.) ;
- Joo, Yong-Sun (Dept. of Civil & Environmental Engineering, Sungkyunkwan Univ.) ;
-
Park, Jong-Sik
(Hanwha Institute of Construction Technology, Hanwha E&C Co, Ltd.)
- 김낙경 (성균관대학교 건설환경시스템공학과) ;
- 윤승권 (성균관대학교 건설환경시스템공학과) ;
- 김성규 (성균관대학교 건설환경시스템공학과) ;
- 주용선 (성균관대학교 건설환경시스템공학과) ;
-
박종식
(한화건설 기술연구소 토목연구팀)
- Published : 2009.03.27
Abstract
The limit equilibrium method and finite element method have been commonly used to assess the stability of anchored slope. However, the existing limit equilibrium methods do not consider the load transfer of anchor and, if the potential failure surface crosses the bonded zone of anchors, the anchor loads are not included in computing the factor of safety. In this paper, simplified bishop method, one among several methods based on the limit equilibrium is used to develope the Excel Sheet program and the working load of anchor along the failure surface is calculated by Flamant's formula, proposed by Morlier and Tenier(1982). Additionally, the finite element analysis of anchored slope considering the load transfer is performed in order to compare with the result from the limit equilibrium analysis and analyze the reinforced effect of anchor. From this study, new modelling method that limits the reinforcing range and considers the load transfer is proposed and Excel Sheet program is developed. The factor of safety for several cases between PC STABL and Excel Sheet program is also compared for verification of the program.