Journal of the Korean Geotechnical Society (한국지반공학회논문집)

Korean Geotechnical Society (한국지반공학회)
권호 표지

Slope Stability Analysis Considering Seepage Conditions by FEM Using Strength Reduction Technique

강도 감소법에 의한 지하수위를 고려한 FEM 사면안정해석

  • 김영민 (전주대학교 토목환경공학과)
  • Published : 2004.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, a finite element based method far determining factor of safety of slopes which has certain advantages over conventional limit equilibrium methods is described. Particularly, the slope failure behaviour considering different seepage conditions is produced by finite element method using strength reduction technique. It is shown that both the failure mechanism and the safety factor that are analyzed by the FEM using strength reduction technique are an effective means of slope stability analysis. And the stability of a slope with rising water table and rapid drawdown are analyzed and the results are compared with the simplified Bishop Method of the Limit Equilibrium Methods.

본 논문은 기존의 한계 평형법 보다 사면의 파괴거동을 잘 묘사할 수 있는 유한요소법에 의한 사면의 안전율을 결정하는 방법에 대하여 기술하였다. 특히, 지하수위를 고려하는 사면의 파괴거동을 강도감소법에 의한 유한요소법으로 산정하였다. 그 결과, 강도 감소법을 이용한 FEM해석방법이 사면의 안정해석에 대하여 파괴거동과 안전율을 구하는데 유효한 수단임을 보여 주었다. 그리고 지하수 상승경우와 지하수 급강하 사면의 경우에 대하여 자세히 분석하였으며, 한계평형법인 Bishop간편법 해석결과와 비교, 검토하였다.

Keywords

References

  1. 김영민 (1999), '유한요소법에 의한 사면붕괴 거동해석에 미치는 영향분석', 한국지반공학회논문집, Vol.15, No.5, pp,19-28
  2. 김주용 (1997), '유한요소법을 이용한 사면안정해석', 한국과학기술원 박사학위논문
  3. Anderson, M.G and Richards, K.S. (1987), Slope stability, John Wiley
  4. Chowdhury, R.N. (1978), Slope analysis, Elsevier Scientific Publishing Company
  5. Davis, E.H. and Booker, J.R. (1989), 'The effect of increasing strength with depth on the bearing capacity of clay', Geotechnique, Vol.23, No.4, pp.551-563
  6. Duncan, J.M. (1996), 'State of art: limit equilibrium and finite element method analysis of slope', Journal of Geotechnical Engineerin, Vol.22, No.7, pp.577-596
  7. Farias, M.M. and Naylor, D.J. (1998), 'Safety analysis using Finite Elements', Computer and Geotechnics, Vol.22, No.2, pp.165-181 https://doi.org/10.1016/S0266-352X(98)00005-6
  8. Griffiths, D.V. and Lane, P.A. (1999), 'Slope stability analysis by finite elements', Geotechnique, Vol.49. No.3, pp.387-403 https://doi.org/10.1680/geot.1999.49.3.387
  9. Matsui, T. and San, K.C. (1990), 'A hybrid slope stability analysis method with its application to reinforced slope cutting', Soils and Foundations, Vol.30, No.2, pp.79-88 https://doi.org/10.3208/sandf1972.30.2_79
  10. Naylor, D.J. (1999), 'On the use of the FEM for assessing the stability of cuts and fills', Numical Models in Geomechanics NUMOGVII, pp.553-560
  11. Program PCSTABL5M (1987), developed in Department of Civil Engineering, Purdue University
  12. Pasternack, S.C. and Gao, S. (1988), 'Numerical methods in the stability analysis of slopes', Computers and Structure, Vol.30, No.3, pp.573-579 https://doi.org/10.1016/0045-7949(88)90291-X
  13. Sarma, S.K. (1979), 'Stability analysis of embankments and slopes', Journal of the Geotechnical Enigneering Division ASCE, Vol.105, pp.1511-1524
  14. Smith, I.M. and Griffiths, D.V. (1988), Programming the finite element method, John Wiley
  15. Zienkiewicz, O.C. and Cormeau. I.C. (1974), 'Visco plasticity and creep in elastic soilids - unified numerical solution approach', Int. J. Num. Meth. Eng., Vol.8, pp.821-845 https://doi.org/10.1002/nme.1620080411
  16. Zienkiewicz, O.C., Humpheson, C. and Lewis, R. (1975), 'Associative and non-associative viscoplasticity and plasticity in soil mechanics', Geotechniques, Vol.25, No.4, pp.671-689 https://doi.org/10.1680/geot.1975.25.4.671
  17. Zienkiewicz O.C. and Pande, G.N. (1977), 'Time dependent multilamiante model of rock: A numerical study of deformation and failure of rock masses', Int. Journ. for Num. and Analy. Meth. in Geomechanics, Vol.1, pp.219-247 https://doi.org/10.1002/nag.1610010302