• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.535-541
• /
• 2004

For housing estate of a new administrative capital city, Noise reduction method is a important design factor. As measuring a noise level of traffic noise according to separation from road, it can be created a quite housing estate. Analyzing of merits and demerits in sound barrier walls and tunnels can be proposed environment friendly soundproofing facilities. Number of measurement was performed to know what kind of layout of housing estate is good for noise reduction. Through this measurement, ㄷ shaped layout or parallel layout has the advantage of sound insulation rather than right angled layout. In this case (ㄷ shaped layout or parallel layout) buildings neighboring to the road should be designed to insulate sound. Evergreen trees should be planted between housing estate and road more than 30m (at least 7～8m) in order to reduce noise and have masking effects. If broad-leaved trees are planted more than 30m, approximately 10dB noise is reduced and 2～4dB if 7～8m. Roads in the estate should be designed considering pedestrians first, and special roads for moving and ambulance should be designed as skew road, if possible. The result shows that 15$^{\circ}$-sloped‘S’road reduces 1～2dB noise and 30$^{\circ}$-sloped road reduces 4～7dB. If noise barrier is inevitably installed, it should be designed to go well wit neighboring environment so as to install Environment Friendly Noise Barrier using materials and trees including wood and soil. Through this study the results are used to guideline for construction of environment friendly housing estate

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.124-125
• /
• 2019

The use of road cutters in the maintenance of obsolete underground facilities maintains polluting dust, cutting sludge, etc, polluting the air environment, soil, and water, causing civil complaints caused by noise, and consequently interrupting work. Therefore, it is time for eco-friendly pavement cutting technology for fugitive dust and cutting sludge emission management and noise management. This study was based on research by the development of eco-friendly pavement cutting technology in urban areas. In this study, the current state of existing road cutters is investigated and the patented technology analysis of road cutters is conducted to derive the design elements of eco-friendly pavement cutting technology.

• Korean Institute of Interior Design Journal
• /
• v.24 no.2
• /
• pp.217-226
• /
• 2015

As the aging society is globally increasing, the guide for the aged-friendly city is suggested by WHO and many cities are preparing to meet with it. The base of this guide for an age-friendly city is an active aging. This study examined how degree the neighborhood environment is age-friendly from older persons' standpoints. The data were collected through the interview with old persons who aged more than 65 years, 117 persons in an urban area and 110 ones in a rural area. The age-friendly degree of neighborhood environment was examined from two aspects. One is how close 12 neighborhood facilities were from the elderly's houses. Another one is how degree the elderly were considered in 4 areas: pedestrian road, traffic, the amount of housing for the elderly, and space layouts of their houses. Findings were as follows. First, the elderly related neighborhood facilities in urban area were closer located to old persons' houses than in rural area, except the senior center. Second, in case of the age-friendly degree of their neighborhood environments, the space layout of house was the highest, and then traffic, pedestrian road, and the amount of housing for the elderly, in order. The consideration degree of wheelchair users was the lowest. Third, the age-friendly degree of pedestrian road, traffic, and room layout of house in rural area were higher than in urban area. However, the amount of housing for the elderly in urban area was higher than in rural area.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.129-138
• /
• 2011

This research has proposed a quantitative environmental assessment method of road routes based on the various policies and literature, and applied such proposal to the planned road routes to evaluate the environment-friendly road routes. Accordingly, the case sections per each region of Joong-bu, Gang-won, and Nam-bu were selected to execute the proposed environmental assessment method. Consequently, it has been confirmed that the distribution of environmental score of the subject region of each case section varied. In particular, for the Gang-won region, the high scores took up the most. Also, to indicate the degree of environment per each section, a route which minimizes the environmental effects per subject region was created to analyze the environmental degree per each section. As a result, the section in the region with the highest environmental sensitivity, in other words the Gang-won region with many high scores, had the lowest environmental degree.

• Journal of Korean Society on Water Environment
• /
• v.27 no.3
• /
• pp.357-363
• /
• 2011

In spite of numerous advantages in railroads such as mass transportation, high reliability, and environmental soundness etc., the value of railroad construction is relatively underestimated compared to road. This is because the current method of evaluation focuses mainly on economic effect. In this study, considering recent research results, the environmental value of railroad construction was assessed by calculating the effect of reduction of emissions and water contamination. With these two benefits, the environmental effect produced by railroads and road construction was calculated and compared to each other using EMME/3. As a result, the senario 4 which considers 'Hot/Cold start' condition and water contamination had highest benefits. Furthermore, the environmental effect produced by railroad is 55~101% higher than road construction. If the suggested method is used in the current appraisal system, the environment-friendly mode like railway would be highly valued, much more than before.

• Proceedings of the Korean Society of Environment and Ecology Conference
• /
• 2005.04a
• /
• pp.54-57
• /
• 2005

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.3
• /
• pp.255-262
• /
• 2008

Value of natural environment and the importance of conservation are augmented gradually, and collision of environment conservation and development are caused in various construction industries. In this study, Presented practical use way to ecological road design using vegetation information and high precision 3-dimensional geo-spatial data for minimizing pollution. Also, analyzed freezing danger of road surface in winter and direct ray of light danger through simulation of completed road and surrounding environment. And presented road design support way through view analysis.

• Journal of Environmental Impact Assessment
• /
• v.26 no.5
• /
• pp.354-364
• /
• 2017

Considerable amount of resources on roads, basic infrastructure, to promote economic development and distribution of goods is invested. Despite the necessity, its undesirable side effects are various environmental problems In order to efficiently evaluate these problems more than before, planning indictors for environment-friendly road constructions is proposed in this study. First, we make an investigation into real-life cases where the extracted planning indicators were applied. Second, it is suggested that an alternative assessment method efficaciously evaluate and/or adopt extracted planning indictors on road construction projects. Finally, criteria to determine environmental impacts with respect to planning indicators and apply them into real cases is proposed. This study has its significance in upgrading past pro-environmental indictors for road construction, suggesting reasonable applications of planning indicators, and setting criteria to determine environmental impacts based on planning indicators.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.123-132
• /
• 2012

PURPOSES: This study is to investigate the consideration which relates with a disaster from route alignment process and proposed the method it will be able to evaluate a disaster danger fixed quantity. METHODS: Use the landslide disaster probabilistic map of GIS based and in about landslide occurrence of the route alignment at the time of neighboring area after evaluating a risk fixed quantity, it compared LCC expense in about each alternative route. It developed the system it will be able to analyze a LCC and a disaster risk in about the alternative route. In order to verify a risk analytical algorithm and the system which are developed it selected national road 59 lines on the demonstrative route and it analyzed a disaster risk. RESULTS: Demonstrative route not only the disaster risk to be it will be able to compare a disaster risk fixed quantity like the economical efficiency degree in compliance with LCC expense productions it compared and there being the designer will be able to decide the alternative route, it confirmed. CONCLUSIONS: Roads can be designed by considering occurs repeatedly landslides and debris flow caused by disasters in advance and expect to be able to effect that can reduce the overall cost to recover losses caused by the disaster, and temporally loss is expected.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.6
• /
• pp.31-38
• /
• 2013

This study carried out fundamental study on the forest road pavement method of cementing the ground using the compaction equipment after laying by mixing with eco-friendly stabilizer, natural soil and water. Target strength of pavement was set to 2.0MPa and the specimen was produced per mixing ratio of cement, kinds of natural soil and curing period to evaluate the durability and unconfined compressive strength. Unconfined compressive strength test was conducted to compare strength by producing the test specimen mixing environment-friendly cement as well as the test specimen mixing cement with the same mixing ratio. To evaluate the durability, surface abrasion test and water flow resistance test were conducted. In addition, SB and GB tests were conducted using iron marble and golf ball to evaluate the walking satisfaction since it can be used by visitors due to the feature of forest road.