• Journal of Adhesion and Interface
• /
• v.21 no.3
• /
• pp.101-106
• /
• 2020

In this study, epoxy-modified acrylate was synthesized. The synthesized acrylate was added to the composition for sheet molding compound (SMC) in the range of 5 phr to 15 phr. The prepared SMC prepreg was molded at high temperature and pressure to produce a glass fiber reinforced composite. Physical properties such as tensile and impact strength of the composite were measured, respectively. Experimental data show that the composite with 5 phr of synthesized acrylate has 20% improved tensile strength and 12% improved impact strength than that of the reference sample.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.290-290
• /
• 2017

Rice (Oryza sativa L.) is one of the most consumed staple food crop which is energy source as carbohydrate and also is considered as the important antioxidant sources including various phenolic compounds. According to the increasing demand of healthy life, the concern to antioxidant also is increasing because of its health-promoting effect. Phenolic compounds are one of the plant secondary metabolites class, which shows various benefits to preventing or treating chronic diseases. In this study, we have measured the total phenol content from total 647 rice samples using the Floin-Ciocalteau method, and then were selected 30 rice genetic resources classified with high, middle, and low group on the basis of total phenol content. The average of the total phenol content of each group was high-group ($6892.9{\pm}488.5{\mu}g\;GAE/g$) > middle-group ($1428.1{\pm}76.0{\mu}g\;GAE/g$) > low-group ($97.6{\pm}11.4{\mu}g\;GAE/g$). The selected rice samples were analyzed with LC-MS/MS to find the composition and concentration of individual phenolic in rice grain. High-group and middle-group contained large amounts of protocatechuic acid and (+)-catechin whereas low-group showed limited amount. Among high-group samples, rice samples with black pericarp color (IT 174089, IT 220079, and IT 259958) had high content of peonidin-3-O-glucoside. Further, these black rice samples were special since polydatin, rarely found stilbenoid in rice grain, was detected. Overall, both the sum of phenolic acid and the sum of flavonoid were high-group > middle-group > low-group. Also, each group exhibited different phenolic compositions; high-group consisted of flavonoid more than phenolic acid, middle-group and low-group was comprised of phenolic acid rather than flavonoid, and non-pigmented rice was composed by fully phenolic acid. The total phenol content had positive relationships with the sum of phenolic compound (r = 0.64), the sum of flavonoid (r = 0.74) at the significance level of p < 0.0001. In addition, protocatechuic acid and quercetin showed positive correlation with above phenolic composition parameters; in order, r = 0.98, 0.65 for protocatechuic acid and r = 0.73, 0.78 for quercetin (p < 0.0001). In conclusion, the total phenol content assay showed the possibility of utilization as a phenolic composition indicator in rice grain. Also, this result was suggested study pigment on other material.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.17 no.2
• /
• pp.59-75
• /
• 2012

The species composition of plankton is essential to understand the material and energy cycling within marine ecosystem. It also provides the useful information for understanding the properties of marine environments due to its sensitivity to the physicochemical characteristics and variability of water masses. In this study we adopted metagenomics to evaluate eukaryotic plankton species diversity from coastal waters off Busan. Characteristics of water masses at sampling sites is expected to be very complex due to the mixing of various water masses; Nakdong River runoff, Changjiang diluted water (CDW), South Sea coastal water, and Tsushima warm current. 18S rDNA clone libraries were constructed from surface waters at the three sites off Busan. Clone libraries revealed 94 unique phylotypes from 370 clones; Dinophyceae(42 phylotypes), Ciliophora(15 phylotypes), Bacillariophyta(7 phylotypes), Chlorophyta(2 phylotypes), Haptophyceae(1 phylotype), Metazoa(Arthropoda( 17 phylotypes), Chaetognatha(1 phylotypes), Cnidaria(2 phylotypes), Chordata(1 phylotype)), Rhizaria (Acantharea(2 phylotypes), Polycystinea(1 phylotype)), Telonemida(1 phylotype), Fungi(2 phylotypes). The difference in species diversity at the closely located three sites off Busan may be attributed to the various physicochemical properties of water masses at these sites by the mixture of water masses of various origins. Metagenomic study of species composition may provide useful information for understanding marine ecosystem of coastal waters with various physicochemical properties in the near feature.

• Journal of the Korean Society of Radiology
• /
• v.9 no.7
• /
• pp.535-540
• /
• 2015

Collimator has important functions with control primary X-ray that decrease radiation exposure dose for patients and reduce scatter ray and make better quality of image. But there are no regulations for X-ray mammography device of collimator, so widely used device adopt rectangularly controlled collimator. Though digital X-ray mammography device expand supply recently, rectangularly controlled collimator of film/screen mode still used. After searching for real condition of beam field with digital mammography, we made a multi-leaf collimator which is able to adjust the beam field in accordance with size and shape of breast, and we measuring up the transitions of image quality, average glandular dose(AGD) and, Dose area product(DAP). There are no significant differences between rectangularly controlled collimator and multi-leaf collimator, and DAP value decreased by 50.72%. As conclusion, there needs to expand the use of multi-leaf collimator for optimum adoption of beam field in digital mammography, and also need to develop an automatic regulation of beam field for reduce of exposure dose to patients.

• Journal of Chest Surgery
• /
• v.33 no.6
• /
• pp.469-475
• /
• 2000

Background: Thoracic aortomyoplasty is one of the surgical treatment for heart failure and has advantages over artificial heart or intraaortic balloon pumps. It uses autogenous skeletal muscles and solves problems such as energy source. However its use in clinical settings has been limited. This preliminary study was designed to develop surgical technique and to determine the effect of acute descending thoracic aortomyoplsty. Material and Method: Thirteen adult Mongrel dogs were used. The left latissimus dorsi muscle was wrapped around the descending aorta under general anesthesis. Swan-Ganz and microtipped Millar catheter were used for the hemodynamics and endocaridial viability ratio. Data were collected with myostimulator on and off in normal hearts and the ischemic hearts. Result: In normal hearts, the mean aortic diastolic pressure increased from 72$\pm$15mmHg at baseline to 78$\pm$13mmHg with stimulator on. Coronary perfusion pressure increased from 61$\pm$11mmHg to 65$\pm$9mmHg. Diastolic time increased from 0.288$\pm$0.003 msec to 0.290$\pm$0.003msec. Systolic time decreased from 0.164$\pm$0.002msec to 0.160$\pm$0.002 msec. Endocardial viability ratio increased from 1.21$\pm$0.22 to 1.40$\pm$0.18. In ischemic hearts, mean aortic diastolic pressure incrased from 56$\pm$21mmHg at baseline to 61$\pm$15mmHg with stimulator on. Coronary perfusion pressure increased from 48$\pm$17mmHg to 52$\pm$15mmHg. Diastolic time increased from 0.290$\pm$0.003 msec to 0.313$\pm$0.004msec. Systolic time decreased from 0.180$\pm$0.002 msec to 0.177$\pm$0.003 msec. Endovascular viability ratio increased from 0.9$\pm$0.31 to 1.1$\pm$0.31. The limited number of cases ruled out the statistic significance. Conclusion: Descending thoracic aortomyoplasty is a simple operation designed to use patient's own skeletal muscles. It trends to increase diastolic augmentation and coronary perfusion pressure. Modification of surgical technique and stimulator protocol would maximize the effect to assist the heart.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.283-293
• /
• 2019

As applications in extreme environments such as aerospace, high-energy plasma and radio-active circumstances increases, the demand for materials that require higher melting points, higher mechanical strength and improved thermal conductivity continues to increase. Accordingly, in order to improve the oxidation/abrasion resistance of the carbon-carbon composite, which is a typical heat-resistant material, a method of using ultra high temperature ceramics was reviewed. The advantages and disadvantages of CVD coating, pack cementation and thermal plasma spraying, the simplest methods for synthesizing ultra-high temperature ceramics, were compared. As a method for applying the CVD coating method to C/C composites with complex shapes, the possibility of using thermodynamic calculation and CFD simulation was proposed. In addition, as a result of comparing the oxidation resistance of the TaC/SiC bi-layer coating and TaC/SiC multilayer coating produced by this method, the more excellent oxidation resistance of the multilayer coating on C/C was confirmed.

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.543-551
• /
• 2012

Road pavements in Korea generally show shorter service life than the predicted one. There are many reasons for this phenomenon including increased traffic load and other attacks from exposure conditions. In order to extend a service life and upgrade the pavement, a new multi-functional composite pavement system is being developed in Korea. This study is to investigate the performances of fiber-reinforced lean concrete for pavement base. This study considered mineral admixtures of fly ash and reject ash. The reject ash is defined as ash that does not meet the specifications for fly ash so that it cannot be used as a supplemental material for cement replacement. Due to the inherent property of lean concrete, compaction during the fabrication of specimens is a key factor. Therefore, this study suggests an appropriate compaction method. From the test results, the compressive strengths of the concrete satisfied the required limit of 5 MPa at 7 days. When a compaction roller was used to mimic actual field conditions, the strength development seemed to be influenced by the compaction energy rather than hydration of cement itself.

• KSBB Journal
• /
• v.20 no.6
• /
• pp.458-463
• /
• 2005

[ $H_2$ ] from CO and water was continuously produced in a trickle bed reactor(TBR) using Citrobacter amalonaticus Y19. When the strain C. was cultivated in a stirred-tank reactor under a chemoheterotrophic and aerobic condition, the high final cell concentration of 13 g/L was obtained at 10 hr. When the culture was switched to an anaerobic condition with the continuous supply of gaseous CO, CO-dependent hydrogenase was fully induced and its hydrogen production activity approached 16 mmol/g cell/hr in 60 hr. The fully induced C. amalonaticus Y19 cells were circulated through a TBR packed with polyurethane foam, and the TBR was operated for more than 20 days for $H_2$ production. As gas retention time decreased or inlet CO partial pressure increased, $H_2$ production rate increased but the conversion from CO to $H_2$ decreased. The maximum $H_2$ production rate obtained was 16 mmol/L/hr at the gas retention time of 25 min and the CO inlet partial pressure of 0.4 atm. The high $H_2$ production rate was attributed to the high cell density in the liquid phase circulating the TBR as well as the high surface area of polyurethane foam used as packing material of the TBR.

• Journal of The Korean Association For Science Education
• /
• v.24 no.6
• /
• pp.1245-1255
• /
• 2004

The purpose of this study is to develop a valid and reliable evaluating instrument for elementary school fifth and sixth graders. The instrument is developed through R&D procedure, which includes two checks of science specialist and two field trials of the instrument. Evaluating items are content-free for each science inquiry skill. Each science inquiry element is based on SAPA and the 7th curriculum. This study has selected 10 science inquiry skills(observing, classifying, measuring, predicting, inferring, recognizing of a problem, controlling variables, interpreting data, drawing a conclusion, designing an experiment), formulated a clear definition of the elements of science inquiry skills, and established the objectives of evaluation. The content areas are divided into three categories, material and energy, life and environment, and the earth and circulation. Each category contains 10 items. So the instrument consists of 30 items. The content validity of items, objectivity of the scoring keys, and clarity of the items has been checked twice by specialists in science education. At the same time, two field trials were performed to produce the reliability of the instruments, discrimination index, and item difficulty index. The instrument has the content validity is 91.6%, reliability 0.79, objectivity 93.3%, discrimination index 0.30, and item difficulty index 66.1%.

• Geomechanics and Engineering
• /
• v.20 no.6
• /
• pp.537-546
• /
• 2020

Oil and natural gas reserves have been recognised abundantly in clayey rich rock formations in deep costal reservoirs. It is necessary to understand the sedimentary history of those reservoir rocks to well explore these natural resources. This work designs a group of laboratory experiments to mimic the physical process of the sedimentary clay-rich rock formation. It presents characterisation results of the physical properties of the artificial clayey rocks synthesized from illite clay, quartz sand and brine water by high-pressure consolidation tests. Special focus is given on the effects of illite clay content and high-stress consolidation on the physical properties. Multi-step loaded consolidation experiments were carried out with stress up to 35 MPa on mixtures constituting of the illite clay, quartz sand and brine water with five initial illite clay contents (w=85%, 70%, 55%, 40% and 25%). Compressibility and void ratio were characterised throughout the physical compaction process of the mixtures constituting of five illite clay contents and their water permeability was measured as well. Results show that the applied stress induces a great reduction of clayey rock void ratio. Illite clay contents has a significant influence on the compressibility, void ratio and the permeability of the physically synthesized clayey rocks. There is a critical illite clay content w=70% that induces the minimum void ratio in the physically synthesised clayey rocks. The SEM study indicates, in the high-pressure synthesised clayey rocks with high illite clay contents, the illite clay minerals are located in layers and serve as the material matrix, and the quartz minerals fill in the inter-mineral pores or are embedded in the illite clay matrix. The arrangements of the minerals in microscale originate the structural anisotropy of the high-pressure synthesised clayey rock. The test findings can give an intuitive physical understanding of the deep-buried clayey rock basins in energy reservoirs.