• Korea-Australia Rheology Journal
• /
• 제15권3호
• /
• pp.125-130
• /
• 2003

The emulsion stability of cosmetic creams based on the water-in-oil (W/O) high internal phase emulsions (HIPEs) containing water, squalane oil and cetyl dimethicone copolyol was investigated with various compositional changes, such as electrolyte concentration, oil polarity and water phase volume fraction. The rheological consistency was mainly destroyed by the coalescence of the deformed water droplets. The slope change of complex modulus versus water phase volume fraction monitored in the linear viscoelastic region could be explained with the resistance to coalescence of the deformed interfacial film of water droplets in concentrated W/O emulsions: the greater the increase of complex modulus was, the more the coalescence occurred and the less consistent the emulsions were. Emulsion stability was dependent on the addition of electrolyte to the water phase. Increasing the electrolyte concentration increased the refractive index of the water phase, and thus decreased the refractive index difference between oil and water phases. This decreased the attractive force between water droplets, which resulted in reducing the coalescence of droplets and increasing the stability of emulsions. Increasing the oil polarity tended to increase emulsion consistency, but did not show clear difference in cream hardness among the emulsions.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.123-131
• /
• 2018

Using mixed nonionic surfactants Span/Tween, we investigated the effects of HLB value on the O/W emulsion stability and rheological behaviors. In this study, MS-01 (Span 60 & Tween 60) and MS-02 (Span 80 & Tween 80) was used as mixed nonionic surfactants. We considered required HLB value 10.85 and selected corresponding HLB value range 8-13. The droplet size distributions, droplet morphology, rheological properties, zeta-potential and creaming index of the emulsion samples were obtained to understand the mechanism and interaction of droplets in O/W emulsion. The results indicated that optimal HLB number for O/W emulsions was 10.8 and 10.7, while using MS-01 surfactant and MS-02 surfactant respectively. MS-01 (HLB = 10.8) sample and MS-02 (HLB = 10.7) sample showed smallest droplet size and highest zeta-potential value. Rheological properties are measured to understand rheological behaviors of emulsion samples. All emulsion samples showed no phase separation until 30 days storage time at $25^{\circ}C$.

• 분석과학
• /
• 제7권2호
• /
• pp.233-236
• /
• 1994

유중수적형 유화계의 유화안정지수를 산출하는 방법을 확립하기 위하여 간편하면서도 예민한 "부피 직접 측정법"을 개발하였는 바, 먼저 강력한 혼합기인 일종의 Ultra-turrax T25를 이용하여 유지방, 유화제 및 물로 구성되면서 유지방이 물보다 많이 함유되는 유중수적형의 유화계를 형성시킨 후 상온에서 시간이 경과함에 따라 분리되어지는 수분층의 부피를 측정하였으며, 유화안정지수는 $(1-V_s/V_a){\times}100$(단, $V_a$는 유화계내에 함유되어 있는 총 수분의 부피이며, $V_s$는 시간이 경과함에 따라 유화계로부터 분리되어지는 수분층의 부피를 의미한다)의 계산식에 대입하여 산출하였다. 한편, sorbitan trioleate, span 60 및 tween 20을 첨가하여 유중수적형 유화계를 형성시킨 후 90분이 경과한 다음 "부피 직접 측정법"에 의하여 유화안정지수를 산출하였는바, 각각 $95.4{\pm}1.8$, $56.1{\pm}2.8$ 및 $41.6{\pm}2.2$였으며, 이러한 값은 유화안정지수의 산출방법으로서 일반적으로 사용하고 있는 "Titus의 방법"과 비교해 볼 때 5.0 이내의 차이-유화안정지수가 평형에 도달하였을 때의 차이 값-를 나타냄을 알 수 있었다.

• 한국축산식품학회지
• /
• 제34권6호
• /
• pp.808-814
• /
• 2014

This study investigated the effect of gum arabic (GA) combined with microbial transglutaminase (TG) on the functional properties of porcine myofibrillar protein (MP). As an indicator of functional property, heat-set gel and emulsion characteristics of MP treated with GA and/or TG were explored under varying NaCl concentrations (0.1-0.6 M). The GA improved thermal gelling ability of MP during thermal processing and after cooling, and concomitantly added TG assisted the formation of viscoelastic MP gel formation. Meanwhile, the addition of GA decreased cooking yield of MP gel at 0.6 M NaCl concentration, and the yield was further decreased by TG addition, mainly attributed by enhancement of protein-protein interactions. Emulsion characteristics indicated that GA had emulsifying ability and the addition of GA increased the emulsification activity index (EAI) of MP-stabilized emulsion. However, GA showed a negative effect on emulsion stability, particularly great drop in the emulsion stability index (ESI) was found in GA treatment at 0.6 M NaCl. Consequently, the results indicated that GA had a potential advantage to form a viscoelastic MP gel. For the practical aspect, the application of GA in meat processing had to be limited to the purposes of texture enhancer such as restructured products, but not low-salt products and emulsion-type meat products.

• 한국식생활문화학회지
• /
• 제38권5호
• /
• pp.356-364
• /
• 2023

This study compared the physicochemical properties of soybean curd residue and black soybean curd residue produced by hot air-drying and freeze-drying. Regardless of drying method, the crude protein, crude ash, crude fiber contents, pH, L, a, b color values and water soluble index were higher in soybean curd residue, whereas total polyphenol contents and antioxidant activity were higher in black soybean curd residue. Significant differences in water absorption index, oil absorption capacity and emulsion activity were observed between soybean curd residue and black soybean curd residue in freeze-drying. On the other hand, the emulsion stability was not significant difference in both hot-air drying and freeze-drying. The crude protein and crude fiber contents of soybean curd residue were not significant difference between hot-air drying and freeze-drying. Freeze-drying resulted in higher crude ash contents, pH, water absorption index, water soluble index, oil absorption capacity, emulsion activity and emulsion stability than hot-air drying. Hot-air drying have caused significantly higher water contents, water activity, total polyphenol contents and antioxidant activity in soybean curd residue than freeze-drying. In conclusion, soybean type and drying methods affect the physicochemical and quality characteristics of soybean curd residue, which could be important factors in the manufacture of processed foods.

• 대한화장품학회지
• /
• 제25권4호
• /
• pp.65-74
• /
• 1999

We have studied the stability of W/O high internal phase emulsions(HIPE) containing water, cetyl dimethicone copolyol and oils varying magnesium sulfate in the range 0 to 0.5 wt% and oil polarities, respectively. The rheological consistency was mainly destroyed by the coalescence of the deformed water droplets. The greater the increase of complex modulus was, the less coalescence occurred and the more consistent the concentrated emulsions were. The increasing pattern of complex modulus versus volume fraction has been explained with the resistance to coalescence of the deformed interfacial film of water droplets in concentrated W/O emulsion. The stability is dependent on: (i) the choice of the oil is important, the requirements coincide with the requirements for the formation of the rigid liquid crystalline phases; and (ii) addition of salts the aqueous phase opposes the instability due to coalescence. Increasing the salt concentration increases the refractive index of the aqueous phase. It lowers the difference in the refractive index between the oil and aqueous phases. This decreases the attraction between the water domains, thus increasing the stability.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 1999년도 IFSCC . ASCS 학술대회 발표 논문
• /
• pp.65-74
• /
• 1999

We have studied the stability of W/O high internal phase emulsions(HIPE) containing water, cetyl dimethicone copolyol and oils varying magnesium sulfate in the range 0 to 0.5wt% and oil polarities, respectively. The rheological consistency was mainly destroyed by the coalescence of the deformed water droplets. The greater the increase of concentrated modulus was, the less coalescence occurred and the more consistent the concentrated emulsions were. The increasing pattern of complex modulus versus volume fraction has been explained with the resistance to coalescence of the deformed interfacial film of water droplets in concentrated W/O emulsion. The stability is dependent on: (i) the choice of the oil is important, the requirements coincide with the requirements for the formation of the rigid liquid crystalline phases :5; and (ii) addition of salts the aqueous phase opposes the instability due to coalescence:. Increasing the salt concentration increases the refractive index of the aqueous phase. It lowers the difference in the refractive index between the oil and aqueous phases. This decreases the attraction between the water domains, thus increasing the stability.

• 공업화학
• /
• 제29권6호
• /
• pp.682-689
• /
• 2018

본 연구에서는 중심합성계획모델을 사용하여 닥나무 추출물을 함유한 cosmeceuticals 유화액의 안정성 조건을 설정하였다. 중심합성계획모델을 이용한 유화 최적화 조건으로 계량인자는 유화제와 유화안정제의 농도로, 반응치는 ESI와 PDI로 설정하였으며 ESI의 목표값은 60% 이상, PDI의 목표값은 최소값으로 하였다. 유화 최적화 결과 유화제와 유화안정제의 농도는 각각 3.73, 3.07 wt%이었으며, 이때 예상 반응치 ESI는 60%, PDI는 0.585로 산출되었다. 유화제와 유화안정제의 농도가 증가할수록 제조한 유화액의 안정성은 증가하는 경향을 보였으며, 두 가지의 계량인자 중 ESI에 가장 큰 영향을 미치는 인자는 유화제였으며, PDI에 대한 두 인자의 영향은 유사하게 나타났다. 중심합성계획모델의 실험조건으로 제조한 cosmeceuticals 유화액의 ESI는 적어도 약 45% 이상의 안정성을 보였으나 제조 후 4주 뒤에는 모두 분리되었다. 유화제의 농도가 3.72 wt% 이상일 때 ESI의 값은 60% 이상으로 나타났으며, 유화안정제의 농도가 증가할수록 층 분리 속도는 감소하였다.

• 한국응용과학기술학회지
• /
• 제32권3호
• /
• pp.469-479
• /
• 2015

본 연구는 내수성을 지니고 사용 시 백탁 현상이 없는 투명한 외관을 가지는 자외선 차단 화장료 제재를 개발 하는 방법이다. 외관이 투명한 자외선 차단제는 유화물의 수상부와 유상부의 굴절률 차이에 따른 투명도를 통하여 외관이 투명한 유중수 타입의 자외선 차단제를 연구하였다. 지속성 및 내수성이 우수한 유중수 타입의 에멀젼을 연구하고 제형의 수상부 및 유상부의 비율을 조정하여 유중수형 유화의 안정성을 극대화시키는 방향으로 제형을 설계하는 연구를 수행 하였다. 연구 결과, 수상부와 유상부의 굴절률 차가 0.004이하일 때 투명한 유중수형 에멀전을 형성 할 수 있었으며, 내상부인 수상의 함량이 70% (w/w) 이상에서 안정한 유중수형 에멀젼을 형성하였다. 임상 시험을 통하여 투명한자외선차단제의 자외선 A 차단지수와 자외선 B차단 지수를 측정하였다. 그 결과, 자외선 A 차단지수는 $3.01{\pm}0.30$ 으로 나타났으며, 자외선 B 차단지수는 $30.99{\pm}1.65$로 측정되었다.

• Journal of Pharmaceutical Investigation
• /
• 제37권2호
• /
• pp.113-117
• /
• 2007

The aim of this study was to investigate the effect of different wall material on the microencapsulation efficiency of microcapsules containing fish oil. The present work reports on the microencapsulation of fish oil by spray drying using hydroxypropyl methylcellulose (HPMC) 2910, maltodextrin, gelatin, sodium caseinate as wall materials. The emulsion stability was assessed by emulsion stability index value (ESI). The microstructural properties of microcapsules was evaluated by scanning electron microscopy (SEM) and microencapsulation efficiency (ME) was assessed by soxhlet method. The highest ESI and ME were observed in the case of a 1:1 gelatin/sodium caseinate ratio and 1:1 glycerin fatty acid ester/lecithin ratio, and ME of microcapsules was increased with increasing the ESI of emulsion. Thus, the stability of emulsion was a critical factor for the encapsulation of fish oil.