• Journal of the Society of Disaster Information
• /
• v.14 no.2
• /
• pp.154-164
• /
• 2018

Purpose: Recent climate change makes weather-related disasters such as summer storms, heavy rains, winter snowfall disasters, and extreme cold temperature increase in trend. Heavy snowfall disasters requires speedy response due to various effects to traffic flows, buildings, and infrastructure. Heavy snowfall disaster response of South Korea is insufficient, even though heavy snowfall disasters affect urban safety. There have been lack of policy studies for heavy snowfall disasters. Method: This research analyzes case studies and explores implications using Information system technologies to snow removal vehicles and equipments for speedy snow removal during the heavy snowfall disasters. Results: Information system technology attachment to snow removal equipments can identify locations of snow removal vehicles and equipments for emergency period to support snow removal of adjacent jurisdictions. Conclusion: Case studies of this research can be further used for efficient application of snow removal tools of local governments.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.967-975
• /
• 2010

There have been a lot of efforts on the improvement for the ride comfort and handling stability of the combat vehicles. Especially most of vehicles for military purpose have bad inertial condition and severe operating condition such as the rough road driving, and need a high mobility in the emergency status. It is necessary to apply the controlled suspension system in order to improve the vehicle mobile stability and ride comfort ability of crews. A feasibility study is performed on the application of the semi-active suspension system with a magneto-rheological controlled shock absorber for a $6{\times}6$ combat vehicle. First, the dynamic simulation model of the vehicle including the control model for the semi-active suspension system was executed. Based on this model, a hardware-in-the-loop simulation(HILS) system which has a semi-active suspension controller hardware was constructed. After full vehicle simulations were performed in virtual proving courses with this system, the semi-active suspension system was proven to give better ride comfort and handling stability in comparison with the conventional passive suspension system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.521-528
• /
• 2018

Military vehicles use run-flat wheels for emergency situations. Run-flat wheels can run required distance in a defined duration with the pressure loss tire. For the application of a run-flat system, wheels are designed in 2 pieces, including an inner rim and outer rim. These rims are assembled using clamping bolts. Clamping bolts determine the durability of military vehicle wheels because fracture of clamping bolts account for most wheel failures. For improving wheel durability, clamping bolt durability must be improved. In this study, wheel test conditions and bolt design were investigated. Existing test standards are not sufficient to conduct endurance tests. Supplementary conditions were investigated. Using these modified test conditions, the durability of wheels including clamping bolts was tested and verified. Results found the durability of wheels improved more than 168%. This study also proposes improvements in the design process of clamping bolts.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.3
• /
• pp.97-106
• /
• 2024

The Data Storage System for Automated Driving(DSSAD) is a system that records driving information of Lv.4 or higher autonomous vehicles and is different from EDR that records car information in emergency situations. The study of DSSAD recordings is important for responding to various events that may occur in the future commercialization of Lv.4 autonomous vehicles. Therefore, in this study, we conducted a expressway automated driving demonstration and analyzed the collected data to derive the recording elements of DSSAD. During our two-year demonstration of autonomous driving on expressways, we collected and analyzed instances of disengagement. Our findings indicate that 51.6% of disengagement on expressways occurred during lane changes. From the study, we have identified DSSAD record elements for analyzing disengagement situations. Furthermore, implications of future research direction of disengagement analysis were presented.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.1 s.6
• /
• pp.15-29
• /
• 2005

Truck Shipment Safety Information, which is a part of the development of NERIS is divided into Optimal Route Guidance System and Emergency Response System. This research is for establishing an advance warning system, which aims for preventing damages(fire, explosion, gas-escape etc.) and detecting incidents that are able to happen during transporting hazardous materials in advance through monitoring the position of moving vehicles and the state of hazardous materials in real-time. This research is peformed to confirm the practical possibility of application of the advance warning system that monitors whether the hazardous materials transport vehicles move the allowed routes, finds the time and the location of incidents of the vehicles promptly and develops the emergency system that is able to respond to the incidents as well by using the technologies of CPS, CDMA and CIS with testing the ability of performance. As the results of the test, communication accuracies are 99$\%$ in freeway, 96$\%$ in arterial, 97$\%$ in hilly sections, 99$\%$ in normal sections, 96$\%$ in local sections, 99$\%$ in urban sections and 98$\%$ in tunnels. According to those results, the system has been recorded a high success rate of communication that enough to apply to the real site. However, the weak point appeared through the testing is that the system has a limitation of communication that is caused in the rural areas and certain areas where are fewer antennas that make communication possible between on-board unit and management server. Consequently, for the practical use of this system, it is essential to develop the exclusive en-board unit for the vehicles and find the method that supplements the receiving limitation of the GPS coordinates inside tunnels. Additionally, this system can be used to regulate illegal acts automatically such as illegal negligence of hazardous materials. And the system can be applied to the study about an application scheme as a guideline for transporting hazardous materials because there is no certain management system and act of toxic substances in Korea.

• Journal of Korean Society of Transportation
• /
• v.32 no.4
• /
• pp.293-302
• /
• 2014

Recently, advanced sensors and communication technologies have been widely applied to advanced safety vehicles for reducing traffic accidents and injury severity. To apply the advanced safety vehicle technologies, it is important to quantify safety benefits, which is a fundamental for justifying application. This study proposed a methodology for quantifying the effectiveness of the Advanced Driver Assistant System (ADAS) with the Analytic Hierarchy Process (AHP). When the proposed methodology is applied to 2008-2010 Gyeonggi-province crash data, ADAS would reduce about 10.18% of crashes. In addition, Adaptive Cruise Control, Automatic Emergency Braking System, Lane Departure Warning System and Blind Spot Detection System are expected to reduce about 10.43%, 10.17%, 9.96%, and 10.18%, respectively. The outcomes of this study might support decision making for developing not only vehicular technologies but also relevant safety policies.

• Journal of Radiation Protection and Research
• /
• v.32 no.2
• /
• pp.79-88
• /
• 2007

When an accident occurs at nuclear power plant and radionuclide material is released to the area around the plant, public evacuation is considered as a measure to protect the safety of the residents nearby. This study draws factors required to estimate evacuation time and make estimation of the time to evacuate all residents from the EPZ of Wolsong site in consideration of traffic condition in the neighborhood and on the basis of field data around the site for each factor. The traffic capacity and the traffic volume by season were investigated for the traffic analysis and simulation within EPZ of Wolsong site. As a result, the background traffic volume by season were established. To estimate TGT(Trip Generation Time), the questionnaire surveys were carried out for resident and transient. The TSIS code was applied to traffic analysis in the events of daytime/night and normal/adverse weather under normal day/summer peak traffic condition. The results showed that the evacuation time required for total vehicles to move out from EPZ took generally from 118 to 150 minutes. The evacuation time took longer maximum 17 minutes at night than daytime during summer peak traffic.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.319-326
• /
• 2018

The safety interval to prevent collision between trains in a train control system is based on the braking distance according to the emergency braking of the train. The evaluation of the braking performance is based on the longitudinal train dynamics or the commissioning test in the test track, but since the conditions such as the weakening of the adhesion coefficient between the wheel and rail can not all be considered, these conventional methods are not sufficient to design of the train control systems. Therefore, in this study, the Monte Carlo Method (MCM) which can consider various environments is used to analyze braking performance and limitations. The braking model is based on the air braking used in the emergency braking and is modeled to take into account the braking pressure, efficiency, friction coefficient, adhesion condition, and vehicle mass distribution. It is confirmed that braking performance can be improved by controlling the quality of braking device. In addition, the change of the braking performance was confirmed according to the vehicle constituting the train. The results of this study are expected to be used as basic information for designing safety clearance for the train control systems and as a basis for improving the braking performance of railway vehicles.

• Science of Emotion and Sensibility
• /
• v.22 no.4
• /
• pp.15-30
• /
• 2019

The reduction of traffic accidents is a primary potential benefit of autonomous vehicles (AVs). However, the prevalence of AVs also arouses a key question: to what extent should a human wrest control back from AVs? Specifically, in an unavoidable situation of emergency, should an AV be able to decide between the safety of its own passengers and endangered pedestrians? Should AV programming include well-accepted decision rules about actionsto take in hypothetical situations? The current study (N = 103) examined individual/situational variables that could perform critical decision-making roles in AV related traffic accidents. The individual variable of attitudes toward AVs was assessed using the Self-driving Car Acceptance Scale. To investigate situational influences on decisional processes, the study's participants were assigned to one of two groups: the achievement value was activated in one group and the benevolence value was triggered in the other through the use of a sentence completion task. Thereafter, participants were required to indicate who should be protected from injury: the passengers of the concerned AV, or endangered pedestrians. Participants were also asked to record the extent to which they intended to buy an AV programmed to decide in favor of the greater good according to Utilitarian principles. The results suggested that participants in the "achievement value: driver perspective" groupexpressed the lowest willingness to sacrifice themselves to save several pedestrians in an unavoidable traffic accident. This group of participants was also the most reluctant to buy an AV programmed with utilitarian rules, even though there were significant positive relationships between members' acceptance of AVs and their expressed intention to purchase one. These findings highlight the role of the decisional processes involved in the "achievement value" pertaining to AVs. The paper finally records the limitations of the present study and suggests directions for future research.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.39-45
• /
• 2008

A levitation rail is placed on the top of track structure to operate Maglev vehicles and a part of track that link up with a sleeper is applied repeated load in Maglev vehicles operation. This paper aimed to verify validity of design for levitation rail, through the fatigue analysis about load which is applied to levitation rail in Maglev vehicles operation and impact load occurring in an emergency landing. Load conditions applied design load(23kN/m) in normal operation and skid drop load(24kN/m) in vehicle drop. And boundary conditions are consider bolt fixing and welding. Through static analysis, weak point and maximum stress of levitation rail could be obtained. S-N(stress-life) method was used in oder to predict fatigue life, and Goodman relationship was applied to consider a effect of mean stress. Also damage was calculated by using Miner's. As a result of fatigue analysis, levitation rail had a fatigue life which was more than requirement ($10^6$cycle) in all analysis conditions. Assumption that $10^8{\sim}10^9$cycles is infinite life, all analysis conditions had infinite life except a case under drop load and bolt fixing($1.21{\times}10^6$).