• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3056-3068
• /
• 1996

This papre presents the RDM algorithm for composition of bit. After this, we propose a digital signature scheme for facsimile document using RDM algorithm. We modify the even-odd feature in distance of changing pel between coding line and multiple reference line which have been scanned before, and run-length in coding line. The time to take in signature is reduced by spreading of signature. Non-repudiation in origin, the 3rd condition of digital signature is realized by proposed digital signature scheme. The transmitter embeds the signature secretly and tensfers it, and the receiver makes a check of any forgery on the signature and the document. This scheme is compatible with the ITU-T.4(G3 or G4 facsimile standard). The total amount of data transmitted and the quality of image are about the same to that of the original document, thus a third party does not notics signature embeded on the document.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.794-801
• /
• 2003

As it is important to measure the degree of the deterioration and predict service life caused by chloride in concrete structure the methods of measuring chloride in the concrete is raised important problems. This study is to set a new standard for using of the colorimetric method through grasping the character of the colorimetric distinction method, and measuring the chloride content at the place discolored. Also, to predict chloride content around embeded bar and time reaching limit chloride concentration through measuring the chloride content of concrete surface by colorimetric distinction method and this study presents the new concept of concrete degradation and diagnosis of the durability by salt damage. According the results, it is possible to use colorimetric distinction method as simplified measurement to measure the fixed quantity of the chloride concentration. What is more, it would make calculation of concrete surface chloride had a wide fluctuation at the general environment extended. Also, it would be make estimating durability of reinforced concrete structures applied to the basic data.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.4
• /
• pp.49-54
• /
• 2000

A new functional organic thin film optical waveguide ion sensor is designed, which can select a specific ion, i.e., $Ca^{2+}$ -ion. The sensing membrane was composed of PVC-PVAC-PVA copolymer matrix based on anionic cation-selective chromoionophor(ETH5294), neutral ionophore(K23El), anionic site and plasticizer and it was coated on the etched glass substrate as embeded type optical waveguide itself. The sensor sensitivity dependence on waveguide length and thickness, contence of chromoionophore, and each mode was investigated. And this sensor could detect $Ca^{2+}$ ion in concentrations ranging from 1$\times$10­6~1M(with 0.05M tris-HCI buffer solution of pH7.4) by measuring the absorbance change at 514nm of light. Utilizing thin film membrane, the fast response time and high sensitivity are obtained. Also, it is expected that this sensor can be applied to various biochemical important ions.ons.

• Journal of IKEEE
• /
• v.6 no.1 s.10
• /
• pp.47-53
• /
• 2002

This paper manufacturing one system and use this separatively, plan, and embody system that apply integration design method in research about characteristic of internal core of 8051 micro-processors and system reusability so that can use as module of other system. The proposed system itself by object style so that reusability may be possible in proposed method and object style for connection between this systems is required. Set on these request and when systems have own information and were linked with other systems, by supplying own information automatic movement itself is realized and system itself embodies ashes so that can be applied to other system. The proposed method in this paper analyzes and compares with existent Z-80 education board, as well as system that propose offers extensibility, it handles most function to software and development period, expense and baud dimension confirmed advantage of and so on that reduce. Also, design for object style system architecture and showed feature that extensibility and portability are augmented.

• Journal of the Korean Society for Railway
• /
• v.14 no.3
• /
• pp.248-255
• /
• 2011

Impact factor of concrete and ballast track which has been used in Korea railway was applied to equation (1+0.513V/100) from AREA. As the use of this equation, overcapacity of track design might be occurred. Therefore, this study compared impact of ballast track (well, bad) and concrete track (sleeper embeded system, rail floating and sleeper floating) by field test to analyzing dynamic effect of track structure's characterstic and wheel load on service line. In addition, it suggested a method to generate reasonable impact factor on each track type.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.1
• /
• pp.17-25
• /
• 2013

The mechanical properties appeared at the concrete mixed with Polypropylene fiber($1kg/m^3$, $3kg/m^3$, $5kg/m^3$) are compared with normal concrete and wire mesh one and evaluated. Achieved slump test to search effect that PP fiber gets to workability, even if the mixing amount of fiber increases, confirmed that slump value is no change almost. The no difference can be caused by hard mixture, but because of the big softness of fiber there is no effect greatly up to PP fiber mixing amount $5kg/m^3$ even with soft mixture. Compressive strengths and flexural strengths of the concretes with PP fiber and without the fiber are appeared almost alike. If examine load resistance ability by PP fiber mixing amount increase, it could know that the increase of fiber mixing amount improves load resistance ability and the toughness index is increased. While normal concrete is broken at the same time with crack, fiber mixed concrete stand in flexure load continuously after crack occurrence. In compare with wire mesh embeded concrete, wire mesh mixed concrete stands in some degree in flexure load by wire mesh crack occurrence and the test piece was broken at the same time. But, it could know that the PP fiber mixed concrete resist continuously to flexure load in bigger displacement.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.1
• /
• pp.117-125
• /
• 1995

Bond test was carried out to assess the effect of several variables on bond characteristics between reinforcing bar and concrete. Key variables are concrete compressive strength($f_c$'=340, 460, 6513, 904kg/$cm^2$), concrete cover (25, 38, 51, 105, IlOmm), and bar diameter(Dl3 and D22). Confining effect and bar spacing are not taken into account. Thirty-two specimens subjected to uniaxial tension were tested under hypothesis uniform bond stress distribution along the reinforcing bar embeded in concrete. Failure mode was examined and local bond stress versus slip relationship diagrams were represented to show effect of the above variables, also test results(u1timate bond stress) were compared with bond and development provisions of the ACI Building Code(AC1 318-89) and proposed equations from previous research. According to analysis, borld stress and ultimate bond stress increased although compressive strength increased beyond the ACI Building Code upper limit. Therefore in calculating development length. compressive strength effect(exceeding 700kg /$cm^2$) should be accounted.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.283-298
• /
• 2008

The purpose of this study was to evaluate mechanical fit of fixture- abutment-screw interface in the internal connection implant systems. In this study, each two randomly selected internal implant fixture- abutment assemblys from Certain, Xive, Replace, Ankylos, SS II. were used. The implants were perpendicularly mounted in liquid unsaturated polyester by use of dental surveyor. Each abutment was connected to the implant with recommended torque value using a torque controller. All samples were cross-sectioned with grinder-polisher unit after embeded in liquid unsaturated polyester, and then fixture-abutment-screw interfaces of all samples by using optical microscope and scanning electron microscope were analyzed. Conclusively, although a little variation in machining accuracy and consistency was noted in the samples, important features of all internal connection systems were the deep, internal fixture-abutment connections which provides intimate contact with the implant walls to resist micromovement, resulting in a strong stable interface.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.5
• /
• pp.974-983
• /
• 2017

In this paper, we have discussed the search function that can be embedded and used on Android-based applications. We used BM25 to suppress insignificant and too frequent words such as postpositions, Pivoted Length Normalization technique used to resolve the search priority problem related to each item's length, and Rocchio's method to pull items inferred to be related to the query closer to the query vector on Vector Space Model to support implicit feedback function. The index operation is divided into two methods; simple index to support offline operation and complex index for online operation. The implementation uses query inference function to guess user's future input by collating given present input with indexed data and with it the function is able to handle and correct user's error. Thus the implementation could be easily adopted into smartphone applications to improve their search functions.

• Journal of Veterinary Clinics
• /
• v.22 no.1
• /
• pp.36-42
• /
• 2005

Lots of waste are produced from cities and embeded at the depository. The waste produces chemicals and organic matters. Those toxicants contaminate air and water. The pollution causes the increase of insects thereby to spray pesticide on the depository as well as its outskirts. Chemicals and pesticide ingredients are accumulated on the depository and released into outskirts. Those toxic agents are assumed to generate DNA damage to animals exposed to the water and air pollutions. To prove the possibility of DNA damage to pollution, comet assay was conducted on lymphocytes of animals exposed to the pollution of a depository at Southern part of Seoul. Peripheral lymphocytes of animals were treated with endonuclease III and electrophoresed. Broken DNA was released and measured under fluorescence microscope. The measurement showed no statistically significant DNA damage but some individuals showed higher DNA damage than in that of control group. These experiments were carried out on rabbits and dogs, the most and the least contaminated, respectively. The rate of DNA damage of cows was in between that of rabbits and dogs.