Fit of Fixture/Abutment/Screw Interface of Internal Connection Implant Systems |
Shim, Deok-Bo
(Department of Prosthodontics, College of Dentistry, Chosun University)
Kim, Hee-Jung (Department of Prosthodontics, College of Dentistry, Chosun University) Oh, Sang-Ho (Department of Prosthodontics, College of Dentistry, Chosun University) Chung, Chae-Heon (Department of Prosthodontics, College of Dentistry, Chosun University) |
1 | Jeong YT, Chung CH, Lee HT. Screw joint stability according to abutment screw materials. J Korean Acad Prosthodont 2001;39:297-305 과학기술학회마을 |
2 | Binon PP, McHugh MJ. The effect of eliminating implant/ abutment rotational misfit on screw joint stability. Int J Prosthodont 1996; 9:511-519 |
3 | Carr AB, Brunski JB, Labishak J, Bagley B. Preload comparison between as received and cast to implant cylinder. J Dent Res(IADR Abstract) No. 695, 1994 |
4 | Norton MR. An in vitro evaluation of the strength of an internal conical interface compared to a butt joint interface in implant design. Clin Oral Implants Res 1997;8:290-298 DOI ScienceOn |
5 | Besimo CE, Guindy JS, Lewetag D, Meyer J. Prevention of bacterial leakage into and from prefabricated screw-retained crowns on implants in vitro. Int J Oral Maxillofac Implants 1999;14:654- 660 |
6 | Lee HT, Chung CH. Fit of fixture/abutment interface of internal connection implant system. J Korean Acad Prosthodont 2004;42;192-209 과학기술학회마을 |
7 | Schulte JK. External hex manufacturing tolerance of six implant systems : A pilot study. Implant Dent 1994;3:51-53 DOI ScienceOn |
8 | Schulte JK, Coffey J. Comparison of screw retention of nine abutment systems: A pilot study. Implant Dent 1997;6:28-31 |
9 | Kim NH, Chung CH, Son MS, Back DH. A study on the fit implant- abutment-screw interface. J Korean Acad Prosthodont 2003;41:503-518 과학기술학회마을 |
10 | Zarb HA, Schmitt A. The longitudinal clinical effectiveness of osseointegrated dental implants: The Toronto study. Part III: Problems and complications encounted. J Prostet Dent 1990;64: 185-194 DOI ScienceOn |
11 | Binon PP. Implants and components :Entering the new millennium. Int J Oral Maxillofac Implants 2000; 5:76-94 |
12 | Burguette RL, Johns MR, King TB, Patterson EA. Tightening characteristic for screwed joint in osseointegrated dental implant. J Prosthet Dent 1994;71:592-599 DOI ScienceOn |
13 | Sakaguchi RL, Borgersen SE. Nonlinear finite element contact analysis of preload dental implant components. Int J Oral Maxilofac Implant. 1993;655- 661 |
14 | Levine RA, et al. A multicenter retrospective analysis of ITI implant system used for single-tooth replacements: Preliminary results at six or more months of loading. Int J Oral Maxillofacial Implants 1997;12: 237-242 |
15 | Norton MR. Assessment of cold welding properties of internal conical interface two commercially available implant system. J Prosthet Dent 1999;81: 159-166 DOI ScienceOn |
16 | Gross M, Abramovich I, Weiss EI. Microleakage at the abutment- implant interface of osseointegrated implants. Int J Oral Maxillofac Implants 1999;14:94- 100 |
17 | Brunski JE, Hipp JE. In the forces on endosteal implant; A mea- surement system and biomechanical consideration. J Prosthet Dent 1984;51:82 DOI ScienceOn |
18 | Martin WC, Woody RD, Miller BH, Miller AW. Implant abutment screw rotations and preloads for four different screw materials and surfaces. J Prosthet Dent 2001;86:24-32 DOI ScienceOn |
19 | Byren D, Houston F, Cleary R, Claffey N. The fit of cast and premachined implant abutments. J Prosthet Dent 1998; 80:184-192 DOI ScienceOn |
20 | Boggan RS, Strong TA, Misch CE, Bidez MW. Influence of hex geometry and prosthetic table width on statig and fatigue strength of dental implants. J Prosthet Dent 1999;82:436-440 DOI ScienceOn |
21 | Sones AD. Complication with osseointegrated implants. J Prosthet Dent 1989;62:581-585 DOI ScienceOn |
22 | Quirynen M, Bollen CML, Eyssen H, van Steenberghe D. Microvial penetration along the implant components of the Brånemark system. An in vitro study. Clin. Oral Implants Res. 1994:5;239-244 DOI ScienceOn |
23 | Bozkaya D, Muftu S. Mechanics Mechanics of the taper integrated screwed-in (TIS) abutments used in dental implants. J Biomechanics 2005;38:87-97 DOI ScienceOn |
24 | Carr AB, Brunski JB, Hurley E. Effect of fabrication, finishing, and polishing procedures on preload in prostheses using conventional gold and plastic cylinders. Int J Oral Maxillofac Implants 1996;11: 589-598 |
25 | Binon PP. The effect of implant/abutment hexagonal misfit on screw joint stability. Int J Prosthodont 1996; 9:149-152 |
26 | Abrahamsson I, Berglundh T, Lindhe J. Soft tissue response to plaque formation at different implant system. A comparative study in the dog. Clin Oral Implant Res 1998;9:73-79 DOI ScienceOn |
27 | Besimo CE. Guindy JS, Lewetag D, Meyer J. Prevention of bacterial leakage into and from prefabricated screw-retained crowns on implants in vitro. Int. J Oral Maxillofac Implants 1999;14: 654-660 |