• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.4002-4006
• /
• 2014

자동차 배출가스는 자동차에 의해 발생되는 일산화탄소, 탄화수소, 납 외에 사람의 건강 또는 생활 환경에 피해를 일으킬 염려가 있는 물질을 말한다. 배출가스를 감소시키기 위해서 다양한 기술을 개발하는 것도 중요하지만 현재 사용되어 지고 있는 요소를 분석하여 최적의 상태를 찾는 것도 중요한 사항이라 여겨진다. 본 연구는 냉각수에 함유되는 부동액이 배출가스에 영향을 미칠 수 있음에 착안하여 현재 국내에서 시판되고 있는 5개 회사제품의 부동액을 권고 수준의 양을 냉각수에 함유시켜 HC, NOx, $CO_2$ 배출량을 측정하고 배출가스에 미치는 영향을 파악하고자 하였다. 또한, 5개회사 부동액 제품에 대하여 냉각팬 구동시간과 NOx 배출량과의 상관관계를 살펴보고자 하였다. 엔진오일의 온도는 자동차 검사 규격에 맞도록 $90{\sim}93^{\circ}C$에 맞추었고, 수동기어를 사용하는 소형승용차의 검사 규격 속도 $40{\pm}2Km/h$에서 수행하였다. 실험결과 D사 부동액이 팬 작동시간이 가장 짧고, $CO_2$, NOx 배출량이 가장 적게 나타났다.

• Transactions on Electrical and Electronic Materials
• /
• 제17권2호
• /
• pp.92-97
• /
• 2016

This paper presents design and simulation of wide band RF microswitch that uses electrostatic actuation for its operation. RF MEMS devices exhibit superior high frequency performance in comparison to conventional devices. Similar techniques that are used in Very Large Scale Integration (VLSI) can be employed to design and fabricate MEMS devices and traditional batch-processing methods can be used for its manufacturing. The proposed switch presents a novel design approach to handle reliability concerns in MEMS switches like dielectric charging effect, micro welding and stiction. The shape has been optimized at actuation voltage of 14-16 V. The switch has an improved restoring force of 20.8 μN. The design of the proposed switch is very elemental and primarily composed of electrostatic actuator, a bridge membrane and coplanar waveguide which are suspended over the substrate. The simple design of the switch makes it easy for fabrication. Typical insertion and isolation of the switch at 1 GHz is -0.03 dB and -71 dB and at 85 GHz it is -0.24 dB and -29.8 dB respectively. The isolation remains more than - 20 db even after 120 GHz. To our knowledge this is the first demonstration of a metal contact switch that shows such a high and sustained isolation and performance at W-band frequencies with an excellent figure-of merit (fc=1/2.pi.Ron.Cu =1,900 GHz). This figure of merit is significantly greater than electronic switching devices. The switch would find extensive application in wideband operations and areas where reliability is a major concern.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.726-731
• /
• 2002

Reaction synthesis is a process to form ceramics, intermetallics and their composites from elemental powder mixture. Application of this process to a surface modification techniques has a possibilities to enable the process at a lower temperature or for a shorter time, although synthesized materials are likely to include voids and unreacted elements. This paper intend to examine the effect of Si addition to the mixture of Al and Ni on the densification of synthesized Ni-Al intermetallic compounds and to evaluate the surface properties of obtained coatings. By the Si addition, exothermic reaction temperature to form Ni-Al intermetallic was lowered to be below the melting point of Al. Si soluted $Al_3$Ni$_2$, $Al_3$Ni and $Al_{6}$Ni$_3$Si were mainly formed in the coating layer when powder mixture was heated to 973K for 300s. Besides, densification was enhanced by increasing hot press pressure, Si additions and heating rate. When the composition of eutectic Al-Si reaches 78%, void ratio of sintered compact reduced to 0.4%. It is caused by higher flowability of Al-Si liquid phase generated and its infiltration into the void. Since the hardness of NiAl(Si) compound (about 600HV) formed in the coating layer is higher than that of Ni-Al compound (about 400HV), coating layer with high density and superior wear property is obtained by hot press using reaction synthesis from Al-Ni-Si powder mixture.

• 보존과학회지
• /
• 제36권4호
• /
• pp.296-305
• /
• 2020

Konbaung Dynasty was the last unified dynasty that ruled Myanmar from 18^th to 19^th century. During this time Buddhist art flourished in Myanmar due to the interest of the rulers toward their traditional culture. Metal decorative artifacts in the 18^th century are classified into structures and Buddha statues. They are further subdivided into gilt-bronze and bronze objects, depending on their material component. Three-dimensional gilt-bronze decorative artifacts were cast with a brass alloy of Cu-Zn-Sn-Pb and their surfaces were gilded with extremely thin gold leaves (less than 1 ㎛ in thickness). The gilded layer approximately comprised 10 wt% silver in addition to the main element, gold. The lack of Hg in the gilded layer, indicated that the amalgam gilding technique was not applied. The analysis results indicated that the lacquered gilding technique was applied to the objects. Bronze decorative artifacts without gilding were cast with materials containing Cu-Sn-Pb. The bronze pavilions and bronze Buddha staues were crafted using the same alloy of high-tin bronze, which approximately contained 20 wt% Sn. No heat treatment was applied to reduce the brittleness of the objects after they were cast with a large amount of Sn. The most significant difference between the gilt-bronze and bronze decorative artifacts lie in their elemental compositions. The gilt-bronze decorative artifacts with their gilded surface were manufactured using brass containing zinc, while the unplated bronze decorative artifacts were composed of bronze containing tin. Artifacts of the same type and size are classified differently depending on the materials utilized in the surface treatment such as gilding.

• 대한화학회지
• /
• 제39권1호
• /
• pp.47-56
• /
• 1995

세자리 Schiff base의 몰리브네늄(V) 착물로써 $[Mo(Ⅴ)_2O(SOHB)_4],\; [Mo(Ⅴ)_2O_3(SOIP)_2(NCS)_2]$ 및 $ [Mo(Ⅴ)_2O_3(SOTB)_2(H_20)_2]$ (SOHB: Salicylidene-o-imino hydroxybenzene, SOIP; Salicylidene-o-imino pyridine, SOTB; Salicylidene-o-imino thiolbenzene)들을 합성하였다. 이들 착물들의 원소분석과 금속정량, IR, UV-visible spectrum 및 열무게분석(TGA)으로부터 금속과 리간드의 몰비가 1:1 및 1:2 착물임을 확인하였다. 0.1 M tetraethylammonium perchlorate (TEAP) 지지전해질을 포함한 비수용매에서 순환 전압-전류법과 시차펄스 폴라로그래피에 의한 전기화학적 측정으로부터 이들 착물들은 일전자 전이의 확산지배적인 환원과정이 다음과 같이 진행됨을 알았다. Mo(Ⅴ)Mo(Ⅴ)e-→ Mo(Ⅴ)Mo(Ⅳ)e-→Mo(Ⅳ)Mo(Ⅳ)e-→Mo(Ⅳ)Mo(Ⅲ).

• 폴리머
• /
• 제39권2호
• /
• pp.225-234
• /
• 2015

In this study, we proposed to synthesize thermally stable, soluble and conjugated Schiff base polymer (SbP). For this reason, a specific molecule namely 4,4'-thiodiphenol which has sulfur and oxygen bridge in its structure was used to synthesize bi-functional monomers. Bi-functional amino and carbonyl monomers namely 4,4'-[thio-bis(4,1-phenyleneoxy)] dianiline (DIA) and 4,4'-[thiobis(4,1-phenyleneoxy)]dibenzaldehyde (DIB) were prepared from the elimination reaction of 4,4'-thiodiphenol with 4-iodonitrobenzene and 4-iodobenzaldehyde, respectively. The structures of products were confirmed by elemental analysis, FTIR, $^1H$ NMR and $^{13}C$ NMR techniques. The molecular weight distribution parameters of SbP were determined by size exclusion chromatography (SEC). The synthesized SbP was characterized by solubility tests, TG-DTA and DSC. Also, conductivity values of SbP and SbP-iodine complex were determined from their solid conductivity measurements. The conductivity measurements of doped and undoped SbP were carried out by Keithley 2400 electrometer at room temperature and atmospheric pressure, which were calculated via four-point probe technique. When iodine was used as a doping agent, the conductivity of SbP was observed to be increased. Optical band gap ($E_g$) of SbP was also calculated by using UV-Vis spectroscopy. It should be stressed that SbP was a semiconductor which had a potential in electronic and optoelectronic applications, with fairly low band gap. SbP was found to be thermally stable up to $300^{\circ}C$. The char of SbP was observed 29.86% at $1000^{\circ}C$.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2004년도 제20회 발표논문집
• /
• pp.137-153
• /
• 2004

We have analyzed the ingredients of 17 pieces of Bronze Age bronze ware, and an additional 22 pieces of Koryo and Chosun dynasty bronze ware. We have also conducted analysis of the extraction sites where these bronze ware items were found. For analyzing the main ingredient the bronze ware items have been divided into 3 groups - Cu-Sn(70?75:20), Cu-Pb-Sn(70:10:10), Cu-Pb-Sn(60:10:20) type respectively. In tile cases of the Cu-Pb-Sn groups the division comes down to differences in the Cu content as the main component, and elements such as Ni, Fe, Co contribute as a micro ingredient. The geographical and periodic characteristics of ancient bronze ware items show that theircompositional element changes from Cu:Sn to Cu:Pb:Sn and the Cu content decreases with the period,while the Pb content increases with the period. Bronze ware items from Suchon Ri, Gongju (that were used in 3 B.C.) form very different categories from 3rd ${\~}$ 2nd B.C.. They additionally formed very different categories from those bronze ware items analyzed in this research. These bronze ware itemsare shown to be geographically close and periodically overlapped, but made of a new elemental composition. This shows an inflow of a production technical culture present in the new bronze wares. The main component content of Cu is lower, and the Co and Fe contents (as microelements) are much higher than that of other bronze ware items. Such facts showthat those bronze ware items used completely different materials from bronze ware items in other cultural areas, or that there were differences in smelting techniques In the places where ancient bronze ware items have been extracted, it is presumed that the materials originated from the southern parts of Korea andnorthern parts and southern parts of China. .As more bronze ware scientific research is compiled one can conclude that that there will be enough scientific evidence to study the Bronze Age culture of Koreasystematically.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.348-354
• /
• 2009

Copper(II) complexes with tetraoxo dithia tetraaza macrocyclic ligands; [18]ane$N_4S_2$: 1,4,10,13-tetraaza-5,9,14,18-tetraoxo-7,16-dithia-cyclooctadecane, [20]ane$N_4S_2$: 1,5,11,15-tetraaza-6,10,16,20-tetraoxo-8,18-dithia-cyclocosane,Bzo2[18]ane$N_4S_2$: dibenzo-1,4,10,13-tetraaza-5,9,14,18-tetraoxo-7,16-dithia-cyclooctadecane, Bzo2[20]ane$N_4S_2$: dibenzo-1,5,11,15-tetraaza-6,10,16,20-tetraoxo-8,18-dithia-cyclocosane; were entrapped in the nanopores of zeolite-Y by a two-step process in the liquid phase: (i) adsorption of [bis(diamine)copper(II)] (diamine = 1,2-diaminoethane, 1,3-diaminopropane, 1,2-diaminobenzene, 1,3-diaminobenzene); $[Cu(N-N)_2]^{2+}$-NaY; in the nanopores of the zeolite, and (ii) in situ template condensation of the copper(II) precursor complex with thiodiglycolic acid. The obtained complexes and new host-guest nanocomposite materials; $[Cu([18]aneN_4S_2)]^{2+}-NaY,\;[Cu([20]aneN_4S_2)]^{2+}-NaY,\;[Cu(Bzo_2[18]aneN_4S_2)]^{2+}-NaY,\;[Cu(Bzo_2[20]aneN_4S_2)]^{2+}$-NaY; have been characterized by elemental analysis FT-IR, DRS and UV-Vis spectroscopic techniques, molar conductance and magnetic moment data, XRD and, as well as nitrogen adsorption. Analysis of data indicates all of the complexes have been encapsulated within nanopore of zeolite Y without affecting the zeolite framework structure.

• The Journal of Advanced Prosthodontics
• /
• 제7권2호
• /
• pp.85-92
• /
• 2015

PURPOSE. This study aimed to investigate the efficacy of cleaning solutions on saliva-contaminated zirconia in comparison to air-abrasion in terms of resin bonding. MATERIALS AND METHODS. For saliva-contaminated air-abraded zirconia, seven cleaning methods)-no contamination (NC), water-spray rinsing (WS), additional air-abrasion (AA), and cleaning with four solutions (Ivoclean [IC]; 1.0 wt% sodium dodecyl sulfate [SDS], 1.0 wt% hydrogen peroxide [HP], and 1.0 wt% sodium hypochlorite [SHC])-were tested. The zirconia surfaces for each group were characterized using various analytical techniques. Three bonded resin (Panavia F 2.0) cylinders (bonding area: $4.5mm^2$) were made on one zirconia disk specimen using the Ultradent jig method [four disks (12 cylinders)/group; a total of 28 disks]. After 5,000 thermocycling, all specimens were subjected to a shear bond strength test with a crosshead speed of 1.0 mm/minute. The fractured surfaces were observed using an optical and scanning electron microscope (SEM). RESULTS. Contact angle measurements showed that groups NC, AA, IC, and SHC had hydrophilic surfaces. The X-ray photoelectron spectroscopy (XPS) analysis showed similar elemental distributions between group AA and groups IC and SHC. Groups IC and SHC showed statistically similar bond strengths to groups NC and AA (P>.05), but not groups SDS and HP (P<.05). For groups WS, SDS, and HP, blister-like bubble formations were observed on the surfaces under SEM. CONCLUSION. Within the limitations of this in vitro study, some of the cleaning solutions (IC or SHC) were effective in removing saliva contamination and enhancing the resin bond strength.

• 폴리머
• /
• 제32권3호
• /
• pp.239-245
• /
• 2008

Block copolymers of the general formula $[(-CO-R'-CO-HN-Ar-NH-CO-R'-CO)_xNH(CH_2)_3-(Me_2SiO)_y(CH_2)_3NH_2]_n$, [n=18.00 to 1175.0] where $R'=CH_2CH(CH_2GeCl_3)$;$CH_2CHGeCl_3CH_2$; and $Ar=-C_6H_4$;$-(o.CH_3C_6H_4)_2$;$-o.CH_3OC_6H_4)_2$;$-(o.CH_3C_6H_4)$ were prepared by a polycondensation reaction of polyamide containing a pendant trichlorogermyl group and terminal acid chloride $Cl(-CO-R'-CO-NH-Ar-NH-CO-R'-CO-)_xCl$ with aminopropyl-terminated polydimethylsiloxane $H_2N(CH_2)_3(Me_2SiO)_y-(CH_2)_3NH_2]$, (PDMS). These polymers were characterized by elemental analysis, $T_g$, FT-IR, $^1H$-NMR, solid state $^{13}C$-NMR, and molecular weight determination. The thermal stability of these copolymers was examined using thermal analysis techniques, such as TGA and DSC. Their molecular weights as determined by laser light scattering technique ranged $5.13{\times}10^5$ to $331{\times}10^5\;g/mol$. These polymers display their $T_g$ in the range of 337 to $393^{\circ}C$ with an average decomposition temperature at $582^{\circ}C$.