Browse > Article
http://dx.doi.org/10.4047/jap.2015.7.2.85

Efficacy of various cleaning solutions on saliva-contaminated zirconia for improved resin bonding  

Kim, Da-Hye (Department of Medical & Biological Engineering, Graduate School, Kyungpook National University)
Son, Jun-Sik (Korea Textile Development Institute)
Jeong, Seong-Hwa (Faculty of Health Science, Daegu Haany University)
Kim, Young-Kyung (Department of Conservative Dentistry, School of Dentistry, Kyungpook National University)
Kim, Kyo-Han (Department of Dental Biomaterials, School of Dentistry, Kyungpook National University)
Kwon, Tae-Yub (Department of Dental Biomaterials, School of Dentistry, Kyungpook National University)
Publication Information
The Journal of Advanced Prosthodontics / v.7, no.2, 2015 , pp. 85-92 More about this Journal
Abstract
PURPOSE. This study aimed to investigate the efficacy of cleaning solutions on saliva-contaminated zirconia in comparison to air-abrasion in terms of resin bonding. MATERIALS AND METHODS. For saliva-contaminated air-abraded zirconia, seven cleaning methods)-no contamination (NC), water-spray rinsing (WS), additional air-abrasion (AA), and cleaning with four solutions (Ivoclean [IC]; 1.0 wt% sodium dodecyl sulfate [SDS], 1.0 wt% hydrogen peroxide [HP], and 1.0 wt% sodium hypochlorite [SHC])-were tested. The zirconia surfaces for each group were characterized using various analytical techniques. Three bonded resin (Panavia F 2.0) cylinders (bonding area: $4.5mm^2$) were made on one zirconia disk specimen using the Ultradent jig method [four disks (12 cylinders)/group; a total of 28 disks]. After 5,000 thermocycling, all specimens were subjected to a shear bond strength test with a crosshead speed of 1.0 mm/minute. The fractured surfaces were observed using an optical and scanning electron microscope (SEM). RESULTS. Contact angle measurements showed that groups NC, AA, IC, and SHC had hydrophilic surfaces. The X-ray photoelectron spectroscopy (XPS) analysis showed similar elemental distributions between group AA and groups IC and SHC. Groups IC and SHC showed statistically similar bond strengths to groups NC and AA (P>.05), but not groups SDS and HP (P<.05). For groups WS, SDS, and HP, blister-like bubble formations were observed on the surfaces under SEM. CONCLUSION. Within the limitations of this in vitro study, some of the cleaning solutions (IC or SHC) were effective in removing saliva contamination and enhancing the resin bond strength.
Keywords
Zirconia; Saliva; Cleaning agent; Dental bonding;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Piascik JR, Swift EJ, Braswell K, Stoner BR. Surface fluorination of zirconia: adhesive bond strength comparison to commercial primers. Dent Mater 2012;28:604-8.   DOI
2 Matinlinna JP, Heikkinen T, Ozcan M, Lassila LV, Vallittu PK. Evaluation of resin adhesion to zirconia ceramic using some organosilanes. Dent Mater 2006;22:824-31.   DOI
3 Ratner BD. Characterization of biomaterial surfaces. Cardiovasc Pathol 1993;2:87-100.   DOI
4 Spencer HR, Ike V, Brennan PA. Review: the use of sodium hypochlorite in endodontics-potential complications and their management. Br Dent J 2007;202:555-9.   DOI
5 Del Carpio-Perochena AE, Bramante CM, Duarte MA, Cavenago BC, Villas-Boas MH, Graeff MS, Bernardineli N, de Andrade FB, Ordinola-Zapata R. Biofilm dissolution and cleaning ability of different irrigant solutions on intraorally infected dentin. J Endod 2011;37:1134-8.   DOI
6 Liu G, Craig VS. Improved cleaning of hydrophilic proteincoated surfaces using the combination of Nanobubbles and SDS. ACS Appl Mater Interfaces 2009;1:481-7.   DOI
7 Arkles B, Pan Y, Kim YM. The role of polarity in the structure of silanes employed in surface modification. In: Mittal KL, editor. Silanes and other coupling agents. Leiden; CRC Press; 2009. p. 51-64.
8 Vanderlei A, Passos SP, Ozcan M, Bottino MA, Valandro LF. Durability of adhesion between feldspathic ceramic and resin cements: effect of adhesive resin, polymerization mode of resin cement, and aging. J Prosthodont 2013;22:196-202.   DOI
9 Roulet JF. Statistics: nuisance - tool - necessity? J Adhes Dent 2013;15:203.
10 De Lucas M, Janss GFE, Whitfield DP, Ferrer M. Collision fatality of raptors in wind farms does not depend on raptor abundance. J Appl Ecol 2008;45:1695-703.   DOI
11 Yang B, Scharnberg M, Wolfart S, Quaas AC, Ludwig K, Adelung R, Kern M. Influence of contamination on bonding to zirconia ceramic. J Biomed Mater Res B Appl Biomater 2007;81:283-90.
12 Kim MJ, Kim YK, Kim KH, Kwon TY. Shear bond strengths of various luting cements to zirconia ceramic: surface chemical aspects. J Dent 2011;39:795-803.   DOI
13 Wegner SM, Kern M. Long-term resin bond strength to zirconia ceramic. J Adhes Dent 2000;2:139-47.
14 Quaas AC, Yang B, Kern M. Panavia F 2.0 bonding to contaminated zirconia ceramic after different cleaning procedures. Dent Mater 2007;23:506-12.   DOI
15 Yang B, Lange-Jansen HC, Scharnberg M, Wolfart S, Ludwig K, Adelung R, Kern M. Influence of saliva contamination on zirconia ceramic bonding. Dent Mater 2008;24:508-13.   DOI
16 Kim YK, Son JS, Kim KH, Kwon TY. Influence of surface energy parameters of dental self-adhesive resin cements on bond strength to dentin. J Adhesion Sci Technol 2013;27:1778-89.   DOI
17 Yang B, Wolfart S, Scharnberg M, Ludwig K, Adelung R, Kern M. Influence of contamination on zirconia ceramic bonding. J Dent Res 2007;86:749-53.   DOI
18 Phark JH, Duarte S Jr, Kahn H, Blatz MB, Sadan A. Influence of contamination and cleaning on bond strength to modified zirconia. Dent Mater 2009;25:1541-50.   DOI
19 Boulange-Petermann L, Joud JC, Baroux B. Wettability parameters controlling the surface cleanability of stainless steel. In: Mittal KL, ed. Contact angle, wettability and adhesion. Leiden; VSP; 2008. p. 139-51.
20 Kim YK, Min BK, Son JS, Kim KH, Kwon TY. Influence of different drying methods on microtensile bond strength of self-adhesive resin cements to dentin. Acta Odontol Scand 2014;72:954-62.   DOI
21 Takimoto M, Ishii R, Iino M, Shimizu Y, Tsujimoto A, Takamizawa T, Ando S, Miyazaki M. Influence of temporary cement contamination on the surface free energy and dentine bond strength of self-adhesive cements. J Dent 2012;40:131-8.   DOI
22 Chibowski E, Holysz L, Terpilowski K, Jurak M. Investigation of super-hydrophobic effect of PMMA layers with different fillers deposited on glass support. Colloids Surf A: Physicochem Eng Asp 2006;291:181-90.   DOI
23 Holysz L, Miroslaw M, Terpilowski K, Szczes A. Influence of relative humidity on the wettability of silicon wafer surfaces. Ann UMCS Chem 2008;63:223-39.
24 Sattabanasuk V, Vachiramon V, Qian F, Armstrong SR. Resin-dentin bond strength as related to different surface preparation methods. J Dent 2007;35:467-75.   DOI
25 Phark JH1, Duarte S Jr, Blatz M, Sadan A. An in vitro evaluation of the long-term resin bond to a new densely sintered high-purity zirconium-oxide ceramic surface. J Prosthet Dent 2009;101:29-38.   DOI
26 Hagge MS, Lindemuth JS. Shear bond strength of an autopolymerizing core buildup composite bonded to dentin with 9 dentin adhesive systems. J Prosthet Dent 2001;86:620-3.   DOI
27 Yun JY, Ha SR, Lee JB, Kim SH. Effect of sandblasting and various metal primers on the shear bond strength of resin cement to Y-TZP ceramic. Dent Mater 2010;26:650-8.   DOI
28 McClean MD, Rinehart RD, Ngo L, Eisen EA, Kelsey KT, Wiencke JK, Herrick RF. Urinary 1-hydroxypyrene and polycyclic aromatic hydrocarbon exposure among asphalt paving workers. Ann Occup Hyg 2004;48:565-78.   DOI
29 Neppelberg E, Costea DE, Vintermyr OK, Johannessen AC. Dual effects of sodium lauryl sulphate on human oral epithelial structure. Exp Dermatol 2007;16:574-9.   DOI
30 Walsh LJ. Safety issues relating to the use of hydrogen peroxide in dentistry. Aust Dent J 2000;45:257-69; quiz 289.   DOI
31 Baumgartner JC, Cuenin PR. Efficacy of several concentrations of sodium hypochlorite for root canal irrigation. J Endod 1992;18:605-12.   DOI
32 Chen L, Suh BI, Brown D, Chen X. Bonding of primed zirconia ceramics: evidence of chemical bonding and improved bond strengths. Am J Dent 2012;25:103-8.