• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.11
• /
• pp.1857-1863
• /
• 2013

Bulgogi sauces containing electron beam-irradiated garlic powder (1%, 3%, and 5%) were used to compare their irradiation status before and after pasteurization ($85^{\circ}C$, 30 min), using a thermoluminescence (TL) analysis by two different laboratories. The sauces with non-irradiated ingredient only provided a background TL glow curve with a maximum peak after $300^{\circ}C$. However, the presence of irradiated ingredient (1 and 10 kGy) was evident through the typical TL glow curves in a temperature range of 150 to $250^{\circ}C$. The concentration of irradiated ingredients showed a greater impact on identification characteristics than their radiation doses. TL ratios ($TL_1/TL_2$) were not able to confirm the results showing evidence of irradiation through the TL glow curve shapes. Pasteurization showed a negligible effect on the key identification parameters and did not change the shape or temperature range of radiation-specific TL glow peak, but reduced TL glow curve intensity. TL glow curve shape with the maximum peak in a temperature range of $150{\sim}250^{\circ}C$ was the most useful characteristic providing information required for confirming the irradiation status.

• Journal of Pharmacopuncture
• /
• v.19 no.4
• /
• pp.319-328
• /
• 2016

Objectives: Advancements in nanotechnology have led to nanoparticle (NP) use in various fields of medicine. Although the potential of NPs is promising, the lack of documented evidence on the toxicological effects of NPs is concerning. A few studies have documented that homeopathy uses NPs. Unfortunately, very few sound scientific studies have explored the toxic effects of homeopathic drugs. Citing this lack of high-quality scientific evidence, regulatory agencies have been reluctant to endorse homeopathic treatment as an alternative or adjunct treatment. This study aimed to enhance our insight into the impact of commercially-available homeopathic drugs, to study the presence of NPs in those drugs and any deleterious effects they might have, and to determine the distribution pattern of NPs in zebrafish embryos (Danio rerio). Methods: Homeopathic dilutions were studied using high-resolution transmission electron microscopy with selected area electron diffraction (SAED). For the toxicity assessment on Zebrafish, embryos were exposed to a test solution from 4 - 6 hours post-fertilization, and embryos/larvae were assessed up to 5 days post-fertilization (dpf ) for viability and morphology. Toxicity was recorded in terms of mortality, hatching delay, phenotypic defects and metal accumulation. Around 5 dpf was found to be the optimum developmental stage for evaluation. Results: The present study aimed to conclusively prove the presence of NPs in all high dilutions of homeopathic drugs. Embryonic zebrafish were exposed to three homeopathic drugs with two potencies (30CH, 200CH) during early embryogenesis. The resulting morphological and cellular responses were observed. Exposure to these potencies produced no visibly significant malformations, pericardial edema, and mortality and no necrotic and apoptotic cellular death. Conclusion: Our findings clearly demonstrate that no toxic effects were observed for these three homeopathic drugs at the potencies and exposure times used in this study. The embryonic zebrafish model is recommended as a well-established method for rapidly assessing the toxicity of homeopathic drugs.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.5
• /
• pp.230-235
• /
• 2004

In this paper, epoxy elasticity factors were investigated by TMA (Thermomechanical Analysis), DMTA (Dynamic Mechanical Thermal Analysis) and FESEM (Field Emission Scanning Electron Microscope) to improve toughness and reduce brittleness of existing epoxy resin. Dumbbell shaped specimens were made and tested at rates of 0, 20 and 35phr (part per hundred resins). TMA temperatures ranged from -2$0^{\circ}C$ to 20$0^{\circ}C$. Tg (glass transition temperature) of elastic epoxy was measured by thermal analysis. Also investigated were thermal expansion coefficient ($\alpha$), modulus and Tan$\delta$ (loss factor). And we analyzed structure through FESEM, could find elastic-factors of elastic epoxy that is not existing-epoxy. In addition, we measured permittivity and Tan$\delta$ for investigation of the electrical properties of elastic epoxy. Permittivity and Tan$\delta$ depend on elastomer composition. Namely, permittivity and Tan$\delta$ increase according to the elastomer contents. For experimental analysis results, 20phr was considered an excellent specimen.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1290-1292
• /
• 1995

A cylindrical-post magnetron sputtering system was designed for pipe inner coating. The discharge condition was depended on the gas pressure, magnetic field and pipe diameter. At given discharge current, discharge voltage increased a little with pipe diameter. The electron temperature and floating potential increased with magnetic field. The impact ion energy on the pipe increased with bias voltage. The TiN thin-film of $2{\mu}m$ thickness was formed by cylindrical-post magnetron sputtering system under the conditions of the pressure of 5mTorr, the applied voltage of 700V, the discharge current of 500mA, the magnetic field of 300G, and the bias voltage of -100V.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.4
• /
• pp.458-466
• /
• 2012

A Dual metal gate stack cylindrical/ surrounded gate MOSFET (DMGSA CGT/SGT MOSFET) has been proposed and an analytical model has been developed to examine the impact of this structure in suppressing short channel effects and in enhancing the device performance. It is demonstrated that incorporation of gate stack along with dual metal gate architecture results in improvement in short channel immunity. It is also examined that for DMGSA CGT/SGT the minimum surface potential in the channel reduces, resulting increase in electron velocity and thereby improving the carrier transport efficiency. Furthermore, the device has been analyzed at different bias point for both single material gate stack architecture (SMGSA) and dual material gate stack architecture (DMGSA) and found that DMGSA has superior characteristics as compared to SMGSA devices. The analytical results obtained from the proposed model agree well with the simulated results obtained from 3D ATLAS Device simulator.

• Carbon letters
• /
• v.17 no.1
• /
• pp.45-52
• /
• 2016

The attachment of 2-aminobenzamide to carboxylated multi-wall carbon nanotubes (MWCNTs)-COOH was achieved through the formation of amide bonds. Then, the functionalized MWCNTs, MWCNT-amide, were treated by phosphoryl chloride to produce MWCNT-quin. The products were characterized by Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, thermogravimetric analysis, derivative thermogravimetric, steady-state fluorescence spectroscopy, and solubility testing. MWCNT-quin showed photo-electronic properties, which is due to the attachment of the 4-hydroxyquinazoline groups to them as proved by steady-state fluorescence spectroscopy. This suggests intramolecular interactions between the tubes and the attached 4-hydroxyquinazoline. The toxicity of the samples was evaluated in human embryonic kidney HEK293 and human breast cancer SKBR3 cell lines, and the viable cell numbers were measured by 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyltetrazolium bromide (MTT) after the cells were cultured for 24 h. Cellular investigations showed that the modified MWCNTs, particularly MWCNT-quin, have considerably significant toxic impact on SKBR3 as compared to HEK293 at the concentration of 5 µg/mL.

• Korean Journal of Materials Research
• /
• v.24 no.11
• /
• pp.591-598
• /
• 2014

In this research, magnesium powder was prepared by gas atomizing. Refinement behaviors of magnesium powder produced under different conditions were investigated using a mechanical milling (attrition milling) process. Analyses were performed to assess the characterization and comparison of milled powder with different steel ball sizes and milling times. The powders were analyzed by field emission scanning electron microscope, apparent density and powder fluidity. The particle morphology of the Mg powders changed from spherical particles of feed metals to irregular oval particles, then plate type particles, with an increasing milling time. Because of the HCP structure, deformation occurs due to the existence of the easily breakable C-axis perpendicular to the base, which results in producing plate-type powders. An increase in ball size and the impact energy of the magnesium powder maximizes the effect of refinement. Furthermore, it is possible to improve the apparent density and fluidity according to the smoothness of the surface of the initial powder.

• Journal of Periodontal and Implant Science
• /
• v.25 no.1
• /
• pp.76-88
• /
• 1995

The purpose of this was to evaluate the in vitro effects of different application modes of tetracycline HCI on dentin root surfaces. The study group was comprised of 30 teeth with advanced periodontal disease extracted before the start of periodontal therapy. The diseased root surface was vigorously root planed to expose dentin. The teeth were sectioned and cotton pellets. soaked in a saturated solution of tetracycline HCI, were either "placed" or "burnished" on the prepared root surface for 3, 5 min. respectively. Control surfaces were similarly treated with root planing only. Following the various treatments, teeth were fixed. dehydrated, critical point dried, and coated for scanning electron microscopic(SEM) evaluation. The surfaces of tetracycline HCI treated specimens considerably differed from specimens treated with root planing only. Results demonstrated that root-planed, no-tetracycline HCI specimens had amorphous, irregular surface which corresponded to a smear layer. Tetracycline HCI specimens exhibited collagen fibers and dentinal tubules exposed by the removal of the smear layer. Although some differences were seen in surface structures among some specimens. "burnished" application causes more extensive change than "placed" application, and application time of the tetracycline HCl did not seem to have any major impact on the surface morphology.

• Analytical Science and Technology
• /
• v.9 no.1
• /
• pp.1-12
• /
• 1996

The thermally labile compounds with hydroxyl group generate the [${MNH_4}^+$] ion, [$MH^+$] and [$MH^+-OH$] ion by ion-molecule reaction in LC/TSP/MS. But these ions create the trouble in the estimation of molecular weight of an unknown compound because the margin of [${MNH_4}^+$] ion and [$MH^+$] ion is same to that of [$MH^+$] ion and [$MH^+-OH$] ion. If it is compensated for the results by using of the $CF_3COOD+NH_4OH$ LC eluent, the molecular weight of analyte will be able to be confirmed. And this study was tried to recognize whether the fragment ions of thermally labile compound are generated by electron impact or by thermal degradation in ion source.

• Food Science of Animal Resources
• /
• v.29 no.4
• /
• pp.482-486
• /
• 2009

The aim of this study was to optimize a simple, fast, and economical analysis procedure for the determination of 16 different pesticides in raw milk via GC/MSD. Analyses were performed via gas chromatography with electron impact mass spectrometric detection in the selected ion monitoring mode (GC/MSD-SIM) using Pentachloronitrobenzene as the internal standard. The modified sample preparation methodology was based on the Pesticide Analytical Manual (PAM) of the FDA concerning fat extraction, ACN-ether partitioning, and clean-up of the Sep-Pak florisil cartridge. The modified methodology for the determination of the 16 pesticides was validated. The range of LOQs of the 16 pesticides was likely three times lower than their Maximum Residence Levels (MRLs). The recoveries of most of the pesticides were acceptable at the fortification levels of 0.5 and 1.0 ${\mu}g/mL$ and their RSD (%) level was less than 20%. None of the 16 pesticides were detected in the selected raw milk samples.