Browse > Article

Improved Thermal, Structural and Electrical Properties of Elastic-Epoxy Blends System  

Lee, Kyoung-Yong (School of Electrical, Electronics and Information Engineering, Wonkwang University)
Lee, Kwan-Woo (School of Electrical, Electronics and Information Engineering, Wonkwang University)
Choi, Yong-Sung (School of Electrical, Electronics and Information Engineering, Wonkwang University)
Park, Dae-Hee (School of Electrical, Electronics and Information Engineering, Wonkwang University)
Publication Information
KIEE International Transactions on Electrophysics and Applications / v.4C, no.5, 2004 , pp. 230-235 More about this Journal
Abstract
In this paper, epoxy elasticity factors were investigated by TMA (Thermomechanical Analysis), DMTA (Dynamic Mechanical Thermal Analysis) and FESEM (Field Emission Scanning Electron Microscope) to improve toughness and reduce brittleness of existing epoxy resin. Dumbbell shaped specimens were made and tested at rates of 0, 20 and 35phr (part per hundred resins). TMA temperatures ranged from -2$0^{\circ}C$ to 20$0^{\circ}C$. Tg (glass transition temperature) of elastic epoxy was measured by thermal analysis. Also investigated were thermal expansion coefficient ($\alpha$), modulus and Tan$\delta$ (loss factor). And we analyzed structure through FESEM, could find elastic-factors of elastic epoxy that is not existing-epoxy. In addition, we measured permittivity and Tan$\delta$ for investigation of the electrical properties of elastic epoxy. Permittivity and Tan$\delta$ depend on elastomer composition. Namely, permittivity and Tan$\delta$ increase according to the elastomer contents. For experimental analysis results, 20phr was considered an excellent specimen.
Keywords
Elastic-epoxy; High impact; Tg; Elastic-factor;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 T.S. Yoon, B.S. Kim, J.H. Kim, D.S. Lee, 'Cure Behavior of high Performance Epoxy/ Polysulfone Blends (I): Isothermal DSC Analysis', Polymer (Korea), Vol.20, pp.403-411, 1996
2 B. Noble, S. Harris and M. Owen, 'Stress Corrosion Cracking of GRP pultruded Rods in Acid Environments', J. Materials Sci., Vol.18, pp.1244-1254, 1983
3 J. Montesinos, R.S. Gorur, B. Mobasher, D. Kingsbury, 'Mechanism of brittle fracture in nonceramic insulators', IEEE Transactions on DEI, Vol. 9, No.2, April 2002
4 S.O. Kasap, 'Principles of Electronic Materials and Devices', McGraw-Hill, 2002, Chapter 2 and 7
5 T.S. McQuarie, 'corrosion Resistant Properties of Polymer Insulator Core Roads', Synpos. Nonceramic Insulator Technology, Singapore, 1996
6 A.G. Mctcalfe and G.K. Schmitz, 'Mechanism of Stress Corrosion in E-Glass Fillaments', Glass Technology, Vol.13, pp.5-16, 1972
7 S.J. Park, F.L. Jin, J.R. Lee, J.S. Shin, 'hermal Properties and Fracture Toughness Bisphenol-Based DGEBA/DGEBS Epoxy Blend System' Polymer (Korea), No.1, pp.33-39, 2003
8 K. B Lim, B. S Lee, M. Y Chung, D. C Lee,' Analyses on the Increment of Surface Hydrophobicity of Epoxy Composites by Thermal Treatment', Kiee, Vol. 50C, No. 4, April. 2001
9 J. N. Price and D. Hull, 'Effect of Matrix Toughness on Crack Propagation during Stress Corrosion of Glass Reinforced Composites', Composites Science and Technology, Vol.28, pp.193-210, 1987
10 S.C. Kim, 'Polymer Engineering I', HEE JOONG DANG, 1994. Chapter 1-14
11 H. D Kim, 'Electrical and Chemical Properties of Mica/Epoxy Composite Materials as Affected by Short-Time Aging', KIEE Inter. Trans. on EA, Vol.3, No.2, pp.59-65, 2003   과학기술학회마을
12 J.H. Ko, A. Hushur, D.H. Kim, S. Kojima, J.P. Kim, M.S. Jang, Bryan C, 'Elastic Properties of Bismuth Layer-Structure Perovskite Single Crystals Studied by Brillouin Scattering', Journal of the Korean Physical Society, Vo.142, No.94, pp.S1084-S1087, 2003
13 K.S. J, D.H. Chun, D.G. Lee, 'A Study on the Mechanical and Thermo-mechanical of Epoxy Resin Systems', Journal of the Korean Society for Materials, Vol.10, No.4, pp.1-10, 1997
14 Y. Li and J. Unsworth, 'Effect of physical aging on dielectric, thermal and mechanical properties of castepoxy insulators', IEEE Transactions on DEI, Vol. 1, No.1, Feb. 1994
15 R. Moser, K. Robert, K. Thomas, 'Single component epoxy systems used for enhanced electrical performance and applications', Proc. Electrical InsulationConference and Electrical manufacturing & Coil Winding Conference, pp.379-385, Oct. 1993
16 S.C. Santucci, S. Corezzi, D. Fioretto, S. Capaccioli, R. Casalini, M. Lucchesi, S. Presto, and P.A. Rolla, 'Glass transition of an epoxy resin. A wideband dielectric investigation', IEEE Transactions on DEI, Vol. 8, No.3, June 2001