• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.258-259
• /
• 1999

각종 산업공정에서 발생되는 SO$_2$를 처리하기 위하여 화력발전소와 같은 대형 배출업소에서는 주로 FGD 공법이 사용되고, 중소형의 배출업소에서는 건식 또는 반건식 공법 등이 많이 사용되고 있다. 또한 NO$_{x}$의 제거는 SCR 또는 SNCR 공법을 사용하고 있다.(중략)

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1197-1199
• /
• 2009

Self-alignment for the fabrication of printed thin film transistors has become of great interest because of the resolution and registration limits of printing technologies. In this work, self-patterning and selfregistration processes are introduced, which do not need surface energy patterning and the resulting minimum gate channel length could be down to $11.2{\mu}m$ with the sheet resistance of 2.6 ${\Omega}/{\square]$ for the source and drain electrodes.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1740-1745
• /
• 2004

A simplified resistor network model for electrical and mass transport in anode-supported planar solid oxide fuel cell (SOFC) was constructed in order to investigate the effect of interconnect rib geometry on the cell performance. For accurate potential calculation, activation and concentration over-potentials at the electrode/electrolyte interfaces were fully considered in this calculation. When contact resistance was not considered, the optimum interconnect rib length were calculated to be $0.1{\sim}0.2$ mm for 2 mm half unit cell for given operation conditions and properties. However, with realistic contact resistance, the interconnect rib length should be increased to provide larger contact area and thus to obtain better performance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.12
• /
• pp.1095-1099
• /
• 2009

As a substitute material for silicon, we synthesized few layer graphene (FLG) by CVD process with a 300-nm-thick nickel film deposited on the silicon substrate and found out the lowest temperature for graphene synthesis. Raman spectroscopy study showed that the D peak (wave length : ${\sim}1,350\;cm^{-1}$) of graphene was minimized and then the 2D one (wave length : ${sim}2,700\;cm^{-1}$) appeared when rapid thermal anneal is carried out with the $C_2H_2$ treated nickel film. This study demonstrates that a high quality FLG formed at a low temperature of $400^{\circ}C$ is applicable as CMOS devices and transparent electrode materials.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.875-878
• /
• 1992

In this study, We made use of inter-electrode capacitively coupled type plasma polymerization apparatus in order to make the organic optical thin films. We adopted in Benzen. Vinyl-Pyridine and Styrene, which have optical function in the organic world and manufactured double later. It is examined optics properties by it respectively. At the middle wave length as 550[nm], the transmittance is double layer smaller than one of single layer. The refractive index with wave length is various from 1.55 to 1.65. Then, it is known that measured results are valid because the extinction coefficient(K) is about $10^{-4}$ for variation of refractive index.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.213-221
• /
• 1998

The investigation regarding the ignition system of a plasma jet explored by using a constant volume vessel. The purpose of this study is to elucidate relation between the characteristics of the configuration and jet ejection of plasma jet plug, when the sub energy were supplied at plasma jet ignition system. From the results of a visualization by the schlieren system, the jut ejection for plasma jet ignition are depended on the jet plug configuration and sub energy, but the configuration of plasma jet plug is more influenced than the sub energy on the plasma jet ejection. And the plasma jet ignition strongly influences upon the combustion enhancement than the conventional spark ignition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.597-600
• /
• 2001

In order to investigate the electrical properties of X-ray tube oils for insulating and cooling, the breakdown characteristics in temperature range of $20\sim100[^{\circ}C]$, that of AC breakdown in 0.5~2.5[mm] of gap length, we are made researches. The classification for the physical properties of oil for X-ray tube by FTIR and H-NMR experiments was confirmed to type of mineral oils. As for the dependance of breakdown characteristics due to electrode gap length, breakdown voltage was found nearly uniform by impurity effect according to the increase of gap. As a result the characteristics for AC breakdown, the dielectric strength was increased to $90[^{\circ}C]$ but decreased over $90[^{\circ}C]$ in the temperature range.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1850-1852
• /
• 1997

In this paper, the behavior and effect of conducting particles in a $SF_6$ insulated electrode system, are presented. It is shown that the bouncing voltage of the particle is independent of particle length, and that the breakdown voltages are affected by the particle length. The longer the particle, the lower the breakdown voltages. The bouncing-off, the lift off and breakdown voltages increase as the particle diameter increase. The breakdown voltage of free particle is lower than fixed particle on the enclosure.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.481-482
• /
• 2006

We fabricated pentacene organic thin film transistor with good uniformity. And we extracted contact resistance in organic thin film transistors from the plot of the inverse of drain current versus channel length by extrapolating the curve to a channel length of zero, and multiplying by drain-source voltage. Extracted contact resistance is about $70K{\Omega}$ at gate-drain voltage of -20 V

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.597-600
• /
• 2001

In order to investigate the electrical properties of X-ray tube oils for insulating and cooling, the breakdown characteristics in temperature range of 20∼100[$^{\circ}C$], that of AC breakdown in 0.5∼2.5(mm) of gap length, we are made researches. The classification for the physical properties of oil for X-ray tube by FTIR and $^1$H-NMR experiments was confirmed to type of mineral oils. As for the dependance of breakdown characteristics due to electrode gap length, breakdown voltage was found nearly uniform by impurity effect according to the increase of gap. As a result the characteristics for AC breakdown, the dielectric strength was increased to 90[$^{\circ}C$] but decreased over 90[$^{\circ}C$] in the temperature range.