• 대한전기학회논문지:전력기술부문A
• /
• 제49권10호
• /
• pp.486-493
• /
• 2000

This paper presents an application to a multimachine power system of power system stabilizer using revised pole shift adaptive algorithm. Controller parameters are determined by using adaptive control theory in order to maintain optimal operation of generator under the various operating conditions. To determine the optimal parameters of controller and overcome the problem of pole placement algorithm, this paper presents pole shift algorithm revised pole shift factor. Also, the difference between the speed deviation with weighted factor and voltage deviation is used as the input signal of adaptive controller, which provides good damping characteristics. The results tested on a multimachine power system verify that the proposed controller has better dynamic and transient performance than conventional controller.

• 조명전기설비학회논문지
• /
• 제24권9호
• /
• pp.49-55
• /
• 2010

Many electric poles in the softground have been collapsed due to external load. In this study, 10 types of tests were performed with variation of location, numbers and depths of anchor blocks as well as depth of poles to find stresses acting on concrete electric poles. The stresses of concrete poles are relaxed at 600~700[kg] of tensile load, and stresses are concentrated at top of pole, and spread to lower part of pole. In the concrete pole collapse test, tensile load at failure was approximately 1,400[kg], which is twice of design load. As passive zone in the soil increases, the stresses acting on concrete pole are concentrated at lower part of pole based on moment arm earth pressure distribution.

• 전기학회논문지
• /
• 제57권12호
• /
• pp.2202-2207
• /
• 2008

Bearingless SRM(Switched Reluctance Motor) is researched for high speed or special applications which can not use mechanical bearing such as bio pump. In this paper, a novel hybrid pole bearingless SRM is presented. The proposed hybrid pole bearingless SRM has salient poles for torque and suspending force production. Motor torque is controlled by the phase currents in torque pole windings, and the suspending force is controlled by suspending currents in four suspending windings for radial direction suspension. Because the proposed bearingless SRM has divided pole structure, mutual effects between torque current and suspending current are very lower than the conventional one's. From this structure, the number of power devices for power converter can be reduced for bearingless SRM driving. The proposed hybrid pole bearing less SRM is verified by the FEM analysis and experimental results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.402-404
• /
• 2000

The FRP pole had great advantages over other material poles. Light weight, easy installing and transporting were good characteristics. The material's superior properties represented the good durability for sea weather and air pollution, good insulation for electric, and changeable colors. In those properties, usages were like a area affected by sea, downtown, the area among the mountains and a special area for the outstanding views. It was studied that pole manufacturing method, structure analysis of pole by FEM in this study. Filament winding method was selected for a new pole manufacturing method. It produced the tapered poles and mechanically strong properties.

• Journal of Electrical Engineering and Technology
• /
• 제7권5호
• /
• pp.705-713
• /
• 2012

In this paper, a novel 12/14 hybrid pole type bearingless switched reluctance motor (BLSRM) with short flux path and no flux-reversal in the stator is proposed. The proposed BLSRM has separated rotating torque and suspending force poles. Because of independent characteristics between torque and suspending force poles, the torque control can be decoupled from the suspending force control. Due to the short flux path without any reversal flux, compared to the 8/10 hybrid stator pole BLSRM, the output torque is significantly improved and the air-gap is easier to control. Meanwhile, basic design principle for the proposed structure is described. To verify the proposed structure, finite element method (FEM) is employed to get characteristics of the proposed structure and 8/10 hybrid stator pole BLSRM. Based on the analysis, a prototype of the proposed BLSRM is designed and manufactured. Finally, validity of the proposed structure is verified by the experimental results.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.386-390
• /
• 2011

This paper deals with the magnetic equivalent circuit modeling and permanent magnet (PM) performance evaluations of a pole changing memory motor (PCMM). We use a coupled transient finite element method (FEM) and Preisach modeling, which is presented to analyze the magnetic characteristics of the permanent magnets. The focus of this paper is on the evaluation of characteristics such as the magnetizing direction and the pole number of the machine under re- and de-magnetization conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.762_763
• /
• 2009

본 논문에서는 영구자석형 동기전동기와 유도기 특성을 결합한 written-pole motor(WPM)의 운전특성을 다룬다. WPM은 회전자 표면의 자석을 운전 중 착자할 수 있도록 하는 exciter pole을 갖는 독특한 구조로서 유도기와 동기기의 특성을 동시에 나타낸다. WPM의 운전 원리를 설명하고 가전용으로 실제 설계, 제작된 WPM을 대상으로 실험을 통해 특성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1990-1992
• /
• 2003

This paper, Design formula of Bandpass Filter Using Inductive Coupled 2-pole SIR(Step Impedance Resonator) is supposed. General Filter Design Theory of Step Impedance Resonator is presented. Bandpass Filter using Inductive Coupled 2-pole SIR have been designed at 5.8Ghz band frequency for WLAN(Wireless Local Area Network). Simulation have used Circuit Simulation. We were showed excellent agreements between SR design theory and simulation results.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1353-1359
• /
• 2019

It is presented in this paper that the static output feedback (SOF) pole-assignment problem of some linear time-invariant systems can be completely resolved by parametrization in real Grassmann space. For the real Grassmannian parametrization, the so-called Plucker matrix is utilized as a linear matrix formula formulated from the SOF variable's coefficients of a characteristic polynomial constrained in Grassmann space. It is found that the exact SOF pole assignability is determined by the linear independency of columns of Plucker sub-matrix and by full-rank of that sub-matrix. It is also presented that previous diverse pole-assignment methods and various computation algorithms of the real SOF gains for 2-input, 2-output, 4^th order systems are unified in a deterministic way within this real Grassmannian parametrization method.

• 조명전기설비학회논문지
• /
• 제18권5호
• /
• pp.183-188
• /
• 2004

본 논문은 강도부족 전주의 경제적 보강방안으로 추진 중인 겹전주 공법개발과 관련하여 기계적 강도평가를 위해 배전용 콘크리트전주의 수평 재하시험을 수행한 것으로, 현장특성을 최대한 고려하여 전주를 건주한 상태에서 전주의 응력분포 및 피로하중을 검토하였다. 실험결과, 지반이 콘크리트인 경우 단전주보다 강도증가 효과는 최대 1.7배로 증가되었으며 일반토사지반의 경우 겹전주의 보강효과를 확보하기 위해서는 지반의 콘크리트 보강이 필요한 것으로 분석되었다.