• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.463-474
• /
• 2019

This paper presents the effect of winding configuration on the kVA rating of a wye-connected autotransformer applied to a 12-pulse rectifier. To describe the winding configuration of the wye-connected autotransformer, position and proportional parameters are defined and their quantitative relation is calculated. The voltages across and currents through the windings are measured under different winding connections. Consequently, a relation between the kVA rating and position parameter is established in accordance with the analysis, and the optimal winding configuration is obtained on the basis of this relation. A wye-connected autotransformer with the least equivalent kVA rating and simplest winding configuration is designed and applied to the 12-pulse rectifier. Simulations and experiments are conducted to validate the theoretical analysis.

• 전자공학회논문지
• /
• 제52권10호
• /
• pp.21-29
• /
• 2015

철도 차량의 전자화 무인화 시, 보다 높은 안정성을 위해 차량의 각 제어장치를 개별 컴포넌트로 분리하고, 이를 네트워크에 연결하여 분산형 제어시스템을 구성할 필요성이 높아지고 있다. 본 논문은 철도차량의 분산형 제어 시스템 구성을 위해 이더넷 망 이용 시 가능한 네트워크 토폴로지를 제시하고, 대상 토폴로지를 (1) 장애복구, (2) 장치별 필요 포트 수, (3) 차량 간 접속 케이블 수, (4) 성능의 네 가지 관점에서 비교 분석한다. 특히, 철도차량의 고유한 특성인 연결 차량 수의 변화 시, 이에 따른 네트워크 성능 효과를 고려하여 분석을 수행하고, 이에 맞는 네트워크 토폴로지를 제시한다. 이를 위해, 먼저 철도차량의 네트워크 토폴로지 구성을 차량 내와 차량 간 연결로 분류하여 여러 대상 조합을 고려한다. 또, 철도 차량 간 연결 수 증가로 인한 접속 단절/불안정 문제를 완화하기 위해 차량 간 연결에서 스타와 데이지체인의 복합 구성인 하이브리드 토폴로지를 제시한다. 시뮬레이션을 통해 토폴로지 간 성능을 비교하고, 차량 간 연결 수 제한 하에서도 하이브리드 토폴로지가 충분한 성능 개선이 있음을 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.189-192
• /
• 1991

This paper presents a modular structure design of analog Hopfield neural network. Each multiplier consists of four MOS transistors which are connected to an op-amp at the front end of a neuron. A pair of MOS transistor is used in order to maintain linear operation of the synapse and can produce positive or negative synaptic weight. This architecture can be expandable to any size neural network by forming tree structure. By altering the connections, other nework paradigms can also be implemented using this basic modules. The stength of this approach is the expandability and the general applicability. The layout design of a four-neuron fully connected feedback neural network is presented and is simulated using SPICE. The network shows correct retrival of distorted patterns.

• 전자공학회논문지A
• /
• 제29A권10호
• /
• pp.8-16
• /
• 1992

Despite recent advances in electrical switch architectures, the practical switch performance is limited by both the technological and physical constraints of electrical device and wiring. Though an optical switch can have good features, optical devices are of poor quality. Therefore, we propose and study the switching architecture based on free-space optical interconnections and electrical logic devices. And an exchanging method using packets with a parallel form is introduced to solves the blocking problem of the switch that resulted from switching packets with a serial form. The free-space optical interconnections overcome the defects of electrical switch, such as, the complex connections of the wires. The proposed and demonstrated switch is nonblocking, simple and high performable. Other attractive features of the proposed switch include the guarantee of first-in first-out packet sequence. In this thesis, we also discuss the performance of proposed switch and show the experimental results of the 4$\times$4 switch.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.429-432
• /
• 2003

In this paper, a novel neural network approach is proposed for cleaning robot to complete coverage path planning with obstacle avoidance in stationary and dynamic environments. The dynamics of each neuron in the topologically organized neural network is characterized by a shunting equation derived from Hodgkin and Huxley's membrane equation. There are only local lateral connections among neurons. The robot path is autonomously generated from the dynamic activity landscape of the neural network and the previous robot location without any prior knowledge of the dynamic environment.

• 대한전자공학회논문지SD
• /
• 제49권5호
• /
• pp.1-9
• /
• 2012

저항, 콘덴서, 및 인턱터와 함께 4의 회로 소자로 알려진 멤리스터가 개발되었으나, 아직 그 전기적 특성이 충분히 해석되지 않고 있다. 멤리스터들은 연결된 극성에 따라서 저항이 증가 혹은 감소하며, 직렬 혹은 병렬연결 형태에 따라서 그 동작 특성이 다양해진다. 본 연구에서는 HP의 $TiO_2$ 멤리스터를 모델로 하여 다양한 직 병렬회로에 대한 전기적 특성을 분석하였다. 이를 위해서 사인파 입력신호에 대해서 나타나는 전압-전류 간의 히스테르시스 루프의 다양한 모양을 분석하였다. 본 멤리스터 연구결과는 멤리스터 소자에 대한 특성 이해와 논리 회로 및 뉴런 셀에의 응용회로들의 특성을 분석하는데 유용하게 사용될 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.121-123
• /
• 1996

Capacitor-run motor has a capacitor id series with the auxiliary winding for normal running connections. After the shape of stator and rotor are determined, the motor is designed with variables such as winding distributions or capacitance except punching variables. In this paper, the winding distribution and the turn ratio was taken as design variables because the winding distribution affects the torque and efficiency. And capacitance was selected as an additional variable. Simulation results show the validity of proposed method.

• 조명전기설비학회논문지
• /
• 제24권3호
• /
• pp.39-45
• /
• 2010

This paper deals with investigation on the spot for grounding systems of buildings based on international standards at construction sites. The investigation was carried out for grounding method, grounding type, shape of grounding electrode, grounding for a lightning protection system, continuity of steelwork in reinforced concrete structures, etc. The investigation on the spot was performed by a researcher and engineer with over fifteen years of industry experience all over the country. As a result of the investigation on the spot in 13 buildings, common grounding and structure grounding methods were dominant. The safety improvement methods include installation of equipotential bonding conductors for the connection to the main earthing terminal, equipotential bonding conductors for supplementary bonding, use of Surge Protective Devices (SPD), and safe connections between earthing conductors and the rebar.

• Journal of Electrical Engineering and Technology
• /
• 제7권3호
• /
• pp.288-296
• /
• 2012

The method proposed by the author is intended for assistance in decision-making (concerning changes of connections) by operators of complex distribution systems during states of malfunction (particularly in the events of malfunctions, for which the consequences encompass extended parts of the network), through designation of connection action scenarios (creating substitute configurations). It is the use by the classifying system working with the co-evolution algorithm that enables the effective creation of substitute scenarios for the Medium Voltage electric power distribution network. The author also completed works concerning the possibility of using cooperation of the evolutionary algorithm and the co-evolutionary algorithm with local search algorithms. The method drawn up may be used in current systems managing the work of distribution networks to assist network operators in taking decisions concerning connection actions in supervised electric power systems.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2201-2208
• /
• 2014

In this research, the characteristics of Brush-less DC (BLDC) motor in accordance with winding connection method, both Y-connection and D -connection, has been identified with design methodology simply. BLDC motor has been designed for both winding connections, and their torque analysis has been performed considering ideal current source analysis and voltage source analysis with 6-step control. In addition, to reduce torque ripple of BLDC motor, caused by coil inductance, on voltage source analysis with 6-step control, we have proposed suitable control method which is Phase Advance Control. It is verified that the torque ripple has been decreased by virtue of phase advance control, advancing and widening conduction angle of switching, via performance analysis by Finite Element Analysis.