• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.2
• /
• pp.139-146
• /
• 2013

This study is to update of vibration power generating model and to analyze electromotive force on subway. Analysis of electromotive force using power generation depending on classification of locations which are ballast bed and concrete bed. As the section between Seocho and Bangbae in the line 2 subway was changed from ballast bed to concrete bed, it could be analyzed at same condition, train, section. Induced electromotive force equation by Faraday's law was updated using Bayesian regression and correlation analysis with calculate value and experiment value. Using the updated model, it could get 40mV per one power generation in ballast bed, and it also could get 4mV per one power generation in concrete bed. If the updated model apply to subway or any train, it will be more effective to get electric power. In addition to that, it will be good to reduce greenhouse gas and to build a green traffic network.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.1
• /
• pp.11-27
• /
• 2017

The road network system of major domestic urban areas such as city of Seoul was rapidly developed and regionally expanded. In addition, many kinds of life-lines such as electrical cables, telephone cables, water&sewerage lines, heat&cold conduits and gas lines were needed in order for urban residents to live comfortably. Therefore, most of the life-lines were individually buried in underground and individually managed. The utility tunnel is defined as the urban planning facilities for commonly installing life-lines in the National Land Planning Act. Expectation effectiveness of urban utility tunnels is reducing repeated excavation of roads, improvement of urban landscape; road pavement durability; driving performance and traffic flow. It can also be expected that ensuring disaster safety for earthquakes and sinkholes, smart-grind and electric vehicle supply, rapid response to changes in future living environment and etc. Therefore, necessity of urban utility tunnels has recently increased. However, all of the constructed utility tunnels are cut-and-cover tunnels domestically, which is included in development of new-town areas. Since urban areas can not accommodate all buried life-lines, it is necessary to study the feasibility assessment system for utility tunnel by urban patterns and capacity optimization for urban utility tunnels. In this study, we break away from the new-town utility tunnels and suggest a quantitative assessment model based on the evaluation index for urban areas. In addition, we also develop a program that can implement a quantitative evaluation system by subdividing the feasibility assessment system of urban patterns. Ultimately, this study can contribute to be activated the urban utility tunnel.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.329-336
• /
• 2016

In the outdoor advertising and industrial sites, are trying to implement the LED electric bulletin board system that is based on image processing in order to express a variety of intention in real time. Recently, in various field, rather than simple text representation, the importance of intuitive communication using images is increasing. Thus, instead of outputting the simple input information for communication, a system that can output a real-time information being sought. Therefore, the system is directed to overcoming by converting the problem of mapping an image on a variety of conventional LED display that can not be output images, the possible image output formats. Using an LED of low power, it has developed to output the efficient messages and images within a limited resources. This paper provides a system capable of managing the LED display on the wireless network. Atmega2560, Wi-Fi module, using the server and Android applications client, rather than printing a text only, it is a system to reduce the load generated image output character output in to the conversion process as can be managed by the server.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.1-8
• /
• 2016

Current sensors are used widely in the fields of current control, monitoring, and measuring. They have become more popular with the increasing demand for smart grids in a power network, generation of renewable energy, electric cars, and hybrid cars. Although open loop Hall effect current sensors have merits, such as low cost, small size, and weight, they have low accuracy. This paper describes the design and fabrication of a 300A open loop current sensor that has high accuracy and temperature performance. The core of the current sensor was calculated numerically and the signal conditioning circuits were designed using circuit analysis software. The characteristics of the manufactured open loop current sensor of 300 A class was measured at currents up to 300 A. According to the test of the current sensor, the accuracy error and linearity error were 0.75% and 0.19%, respectively. When the temperature compensation was carried out with the relevant circuit, the temperature coefficients were less than $0.012%/^{\circ}C$ at temperatures between $-25^{\circ}C$ and $85^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.817-825
• /
• 2017

The AC-common bus microgrid system can overcome several weaknesses of the DC microgrid system by interconnecting the DC/AC inverters used for renewable energy with an AC network. Nevertheless, the unbalanced loads inherent in the electric power systems of island and small communities can deteriorate the performance of the AC microgrid system. This is because of the limited voltage regulation capability and mixed power flow in the voltage source inverter. In order to overcome the unbalanced load condition, this paper proposes a voltage and current control algorithm for the 4-leg inverter based on the single phase d-q control method, as well as the modeling of the voltage controller using Matlab/Simulink S/W. From the S/W simulation and experiment of the 250KW proto-type inverter, it is confirmed that the proposed algorithm is a useful tool for the design and operation of the AC microgrid system.

• Environmental and Resource Economics Review
• /
• v.13 no.2
• /
• pp.219-243
• /
• 2004

Generally, electricity market has monopoly market structure because of need of enormous investment for infrastructure. However, the introduction of competition in network industry as electricity is a tendency of the world with decreasing the effects of economy of scale due to the advancement of technology. Now, electricity industry restructuring is in progress but the competition in electricity retail market is not in force yet in Korea. Whether a effective competition exist or not is very important to policy decision maker who drive restructuring, but there are small numbers of quantitative researches on that. In this study, we estimated the effectiveness of competition in the electricity retail market through switching costs. If switching costs are high, consumers actually can be locked in incumbent firm in spite of introduction of competition. Therefore switching is a critical factor to determine effectiveness of competition and to estimate the size of switching costs quantitatively can proffer the information about whether the competition in the electricity retail market is effective or not in the future. We estimated switching costs using consumer' stated-preference data by conjoint analysis. In according to estimation results, the cost of switching process is not so high, but the relative brand loyalty of an incumbent company is significantly high. And the price is considered as the most important factor choosing an electric service commodity. Based on the empirical results, it is possible to analyze the relationship between suppliers' competitiveness resulted from management efficiency and customers' switching possibilities. The paper therefore provides guidance for suppliers in deciding to enter into retail competition and for policy makers in introducing retail competition. And it has a significance of estimating the switching costs directly.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.4
• /
• pp.64-72
• /
• 2008

Recently security is being an important issue in almost every field of industry. This situation has affected port logistics industry deeply. Ports are now leaving operational methods that only focus on productivity, and shifting to new ones which focus on safety and customer services on the basis of it. Thus a lot of companies and institutions have offered various solutions as this issue becomes more and more intense. Among them, most typical solutions involve installing special devices to ordinary containers to improve its security, such as CSD (Container Security Device) of GE (General Electric) and eSeal of Savi Networks. On the other hand, these devices focus only on international standards or technical implementation, and this causes inconvenience to actual users like cargo owners, sea carriers, or stevedoring companies. This is considered to be due to lack of sufficient consideration on user demands. This research uses QFD (Quality Function Deployment) method for deducting system requirements in order to solve the problems of previous security devices and to develop a security system that can not only reflect the demands of the users but also considers real-world conditions. According to the QFD results, a total of 21 system CTO's were deducted under 5 categories.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.9
• /
• pp.809-819
• /
• 2004

In this paper, in order to exclude the expansion of M/W relay frequency or its new frequency assignment possibly, we analyzed a possibility of substituting M/W system by B-WLL or optical fiber network regarding service quality and economical points. To define the target of service quality, pre-condition and analysis method for the selected media have been derived to compare each other. E1 transmission with BER 10$^{-1}$ was chosen as a reference capacity, and service distance was calculated f3r the selected media as a function of availability. Also from the economical point we considered 3 systems such as optical fiber, M/W, and B-WLL based upon basic system structure, and analyzed them for various line configurations of fiber optic and B-WLL according to service period, system capacity, transmission distance, and data rate. It was confirmed that B-WLL can provide quality of service with 99.999 % availability within 1.6 km cell radius, and for optical fiber substitution, the leased fiber conduit on an electric pole is more economical than M/W system irrespective of service period, but in case of directly digging for underground conduit, it turned out ineffective regardless of cabling duct types.

• Journal of Korea Water Resources Association
• /
• v.46 no.7
• /
• pp.745-754
• /
• 2013

The systematic analysis and evaluation of required energy in the processes of drinking water production and supply have attracted considerable interest considering the need to overcome electricity shortage and control greenhouse gas emissions. On the basis of a review of existing research results, a practical method is developed in this study for evaluating energy in water supply networks. The proposed method can be applied to real water supply systems. A model based on the proposed method is developed by combining the hydraulic analysis results that are obtained using the EPANET2 software with a mathematical energy model on the MATLAB platform. It is suggested that performance indicators can evaluate the inherent efficiency of water supply facilities as well as their operational efficiency depending on the pipeline layout, pipe condition, and leakage level. The developed model is validated by applying it to virtual and real water supply systems. It is expected that the management of electric power demand on the peak time of water supply and the planning of an energy-efficient water supply system can be effectively achieved by the optimal management of energy by the proposed method in this study.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.69-75
• /
• 2015

Road facilities for safe driving were designed for drivers to distinguish them during day and night, but they cannot play their role when the weather becomes worse. Recently, the road facilities have been designed by using electric and electronic technology so that they can be displayed well at a long distance, but they should be replaced very often due to their frequent breakdown. So, there are many problems in traffic calming and maintenance. In this study, to solve the above problems, semi-permanent LED beacon light was installed in the area where traffic accident are frequent, and monitoring system was developed so that the LED beacon light can be maintenanced by connecting with system. For the above installation and development, system was based on window operating system and it was developed for worker to operate it by using P.C. through connecting with wireless local area network. The result of this study led to analyzing state information on the battery of field-installed LED beacon light in real time, and manegement to effectively by predicting their life cycle.