• East Asian mathematical journal
• /
• 제13권1호
• /
• pp.1-10
• /
• 1997

• 호남수학학술지
• /
• 제11권1호
• /
• pp.119-126
• /
• 1989

• Kyungpook Mathematical Journal
• /
• 제32권3_spc호
• /
• pp.401-413
• /
• 1992

• Korean Journal of Mathematics
• /
• 제19권3호
• /
• pp.331-342
• /
• 2011

We consider the multiplicity of the solutions for a class of a system of critical growth beam equations with periodic condition on t and Dirichlet boundary condition $$\{u_{tt}+u_{xxxx}=av+\frac{2{\alpha}}{{\alpha}+{\beta}}u_{+}^{{\alpha}-1}v_{+}^{\beta}+s{\phi}_{00}\;\;in\;(-\frac{\pi}{2},\;\frac{\pi}{2}){\times}R,\\u_{tt}+v_{xxxx}=bu+\frac{2{\alpha}}{{\alpha}+{\beta}}u_{+}^{\alpha}v_{+}^{{\beta}-1}+t{\phi}_{00}\;\;in\;(-\frac{\pi}{2},\;\frac{\pi}{2}){\times}R,$$ where ${\alpha}$, ${\beta}$ > 1 are real constants, $u_+=max\{u,0\}$, ${\phi}_{00}$ is the eigenfunction corresponding to the positive eigenvalue ${\lambda}_00=1$ of the eigenvalue problem $u_{tt}+u_{xxxx}={\lambda}_{mn}u$. We show that the system has a positive solution under suitable conditions on the matrix $A=\(\array{0&a\\b&0}\)$, s > 0, t > 0, and next show that the system has another solution for the same conditions on A by the linking arguments.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.124-129
• /
• 2011

An improved NDIF method is introduced to efficiently extract eigenvalues of two-dimensional, arbitrarily shaped acoustic cavities. The NDIF method, which was developed by the authors for the eigen-mode analysis of arbitrarily shaped acoustic cavities, membranes, and plates, has the feature that it yields highly accurate eigenvalues compared with other analytical methods or numerical methods (FEM and BEM). However, the NDIF method has the weak point that the system matrix of the NDIF method depends on the frequency parameter and, as a result, a final system equation doesn't take the form of an algebra eigenvalue problem. The system matrix of the improved NDIF method developed in the paper is independent of the frequency parameter and eigenvalues can be efficiently obtained by solving a typical algebraic eigenvalue problem. Finally, the validity and accuracy of the proposed method is verified in two case studies, which indicate that eigenvalues and mode shapes obtained by the proposed method are very accurate compared to the exact method, the NDIF method or FEM(ANSYS).

• 한국소음진동공학회논문집
• /
• 제21권10호
• /
• pp.960-966
• /
• 2011

An improved NDIF method is introduced to efficiently extract eigenvalues and eigenmodes of two-dimensional, arbitrarily shaped acoustic cavities. The NDIF method, which was developed by the authors for the eigen-mode analysis of arbitrarily shaped acoustic cavities, membranes, and plates, has the feature that it yields highly accurate eigenvalues compared with other analytical methods or numerical methods(FEM and BEM). However, the NDIF method has the weak point that the system matrix of the NDIF method depends on the frequency parameter and, as a result, a final system equation doesn's take the form of an algebra eigenvalue problem. The system matrix of the improved NDIF method developed in the paper is independent of the frequency parameter and eigenvalues and mode shapes can be efficiently obtained by solving a typical algebraic eigenvalue problem. Finally, the validity and accuracy of the proposed method is verified in two case studies, which indicate that eigenvalues and mode shapes obtained by the proposed method are very accurate compared to the exact method, the NDIF method or FEM(ANSYS).

• Steel and Composite Structures
• /
• 제6권5호
• /
• pp.401-415
• /
• 2006

Based on a non-linear model taking into account flexural-torsional couplings, analytical solutions are derived for lateral buckling of simply supported I beams under some representative load cases. A closed form is established for lateral buckling moments. It accounts for bending distribution, load height application and pre-buckling deflections. Coefficients $C_1$ and $C_2$ affected to these parameters are then derived. Regard to well known linear stability solutions, these coefficients are not constant but depend on another coefficient $k_1$ that represents the pre-buckling deflection effects. In numerical simulations, shell elements are used in mesh process. The buckling loads are achieved from solutions of eigenvalue problem and by bifurcations observed on non linear equilibrium paths. It is proved that both the buckling loads derived from linear stability and eigenvalue problem lead to poor results, especially for I sections with large flanges for which the behaviour is predominated by pre-buckling deflection and the coefficient $k_1$ is large. The proposed solutions are in good agreement with numerical bifurcations observed on non linear equilibrium paths.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제5권2호
• /
• pp.63-69
• /
• 2001

In this study, we shall be concerned with computing in parallel a few of the smallest eigenvalues and their corresponding eigenvectors of the eigenvalue problem, $Ax={\lambda}Bx$, where A is symmetric, and B is symmetric positive definite. Both A and B are large and sparse. Recently iterative algorithms based on the optimization of the Rayleigh quotient have been developed, and CG scheme for the optimization of the Rayleigh quotient has been proven a very attractive and promising technique for large sparse eigenproblems for small extreme eigenvalues. As in the case of a system of linear equations, successful application of the CG scheme to eigenproblems depends also upon the preconditioning techniques. A proper choice of the preconditioner significantly improves the convergence of the CG scheme. The idea underlying the present work is a parallel computation of the Multi-Color Block SSOR preconditioning for the CG optimization of the Rayleigh quotient together with deflation techniques. Multi-Coloring is a simple technique to obatin the parallelism of order n, where n is the dimension of the matrix. Block SSOR is a symmetric preconditioner which is expected to minimize the interprocessor communication due to the blocking. We implemented the results on the CRAY-T3E with 128 nodes. The MPI(Message Passing Interface) library was adopted for the interprocessor communications. The test problems were drawn from the discretizations of partial differential equations by finite difference methods.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 가을 학술발표회 논문집
• /
• pp.63-68
• /
• 1991

The frequency window method has been extended to include strong coupling and multiple connections between the primary structure and the secondary structures. The rational polynomial expansion of the eigenvalue problem and the analytical methods for its solution are novel and distinguish this work from other eigenvalue analysis methods. The key results are the identification of parameters which quantify the resonance and coupling characteristics; the derivation of analytical dosed-form expressions describing the fundamental modal properties of the frequency windows; and the development of an iterative procedure which yields accurate convergent results for strongly-coupled primary-secondary structures.

• Communications for Statistical Applications and Methods
• /
• 제14권1호
• /
• pp.215-227
• /
• 2007

Variable selection algorithm for Sliced Inverse Regression using penalty function is proposed. We noted SIR models can be expressed as generalized eigenvalue decompositions and incorporated penalty functions on them. We found from small simulation that the HARD penalty function seems to be the best in preserving original directions compared with other well-known penalty functions. Also it turned out to be effective in forcing coefficient estimates zero for irrelevant predictors in regression analysis. Results from illustrative examples of simulated and real data sets will be provided.