• ALGAE
• /
• 제24권2호
• /
• pp.93-104
• /
• 2009

Imaging-PAM fluorometry was used to assess the chlorophyll a fluorescence parameter ${\Phi}_{PSII}$ (effective quantum yield) in Frcus vesiculosus. F. disttchus. ssp. distichus and AscophyIIum nodosum. The objective was to show variadon in fluorescence yield associated with age and frond organ, and to illustrate the spatial scales at which photosynthetic parameters vary on fucoid thalli. In addition, our species represented taxa in different but related genera, species with different ecoloeies (rock pool and non rock pool species), morphologies (with and without air bladders) and longevities (several to 20 or more years). A further objective was to determine the extent to which photosynthetic parameters reflected these differences- Effective quantum yield declined substantially with age in F. vesiculosus and F. distichus ssp. distichus, whereas ${\Phi}_{PSII}$ in A. nodosum was maximal after three years. In A. nodosum ${\Phi}_{PSII}$ was still high in branch segments at least seven years old. Older branches of A. nodosum showed relatively higher and more homogeneous photosynthetic capacity relative to Fucus species. Surfaces of air bladders in A. nodosum and F. vesicu- losus had ${\Phi}_{PSII}$ that was not significantly different from the highest rates, achieved in these species. The heterogene- ity of photosynthetic efficiency is consistent with morphological and developmental differences among the species and their ecology. in particular the longevity of A. nodosum fronds.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1255-1260
• /
• 2018

In this work, a green and simple one-pot route was developed for the synthesis of highly fluorescent aminofunctionalized graphene quantum dots (a-GQDs) via hydrothermal process without any further modification or surface passivation. We synthesized the a-GQDs using glucose as the carbon source and ammonium as a functionalizing agent without the use of a strong acid, oxidant, or other toxic chemical reagent. The as-obtained aGQDs have a uniform size of 3-4 nm, high contents of amino groups, and show a bright green emission with high quantum yield of 32.8%. Furthermore, the a-GQDs show effective fluorescence quenching for $Cu^{2+}$ ions which can serve as effective fluorescent probe for the detection of $Cu^{2+}$. The fluorescent probe using the obtained aGQDs exhibits high sensitivity and selectivity toward $Cu^{2+}$ with the limit of detection as low as 5.6 nM. The mechanism of the $Cu^{2+}$ induced fluorescence quenching of a-GQDs can be attributed to the electron transfer by the formation of metal complex between $Cu^{2+}$ and the amino groups on the surface of a-GQDs. These results suggest great potential for the simple and green synthesis of functionalized GQDs and a practical sensing platform for $Cu^{2+}$ detection in environmental and biological applications.

• ALGAE
• /
• 제22권4호
• /
• pp.319-323
• /
• 2007

This study was conducted with using chlorophyll a fluorescence (indicated as photosynthetic activity) to examine the toxic effect of 96 h exposure of heavy metals and herbicides on the benthic diatom Nitzschia sp. which was isolated from pristine sediment in Pamquat Harbour, Nova Scotia, Canada. Samples of benthic diatom were exposed to 0, 0.01, 0.1 and 1 mg L–1 of copper, 0, 1, 10 and 100 mg L–1 of chrome (VI), 0, 2.45, 24.5 and 245 mg L–1 of paraquat dichloride, and 0, 4.37, 43.7 and 437 mg L–1 of alachlor during 96 hours. The effective quantum yield of photochemistry (ΔF/Fm’) was evaluated by subjecting light acclimated samples to saturating pulses of light using a pulse amplitude modulated (PAM) fluorometer. The impact of heavy metals on Nitzschia sp. photosynthesis was not severe in < 1 mg L–1 but in the high concentrations (> 1 mg L–1) clearly increased toxic stress during 96 h. Herbicides had a limited impact during the exposure period but clearly increased stress on the benthic diatom with increasing concentrations. Acute response of Nitzschia sp. to selected heavy metals and herbicides was characterized, and the capacity of a benthic diatom to tolerate and recover from toxic stress was assessed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.400.1-400.1
• /
• 2016

Interfacial engineering approaches as an efficient strategy for improving the power conversion efficiencies (PCEs) of inverted polymer solar cells (iPSCs) has attracted considerable attention. Recently, polymer surface modifiers, such as poly(ethyleneimine) (PEI) and polyethylenimine ethoxylated (PEIE), were introduced to produce low WF electrodes and were reported to have good electron selectivity for inverted polymer solar cells (iPSCs) without an n-type metal oxide layer. To obtain more efficient solar cells, quantum dots (QDs) are used as effective sensitizers across a broad spectral range from visible to near IR. Additionally, they have the ability to efficiently generate multiple excitons from a single photon via a process called carrier multiplication (CM) or multiple exciton generation (MEG). However, in general, it is very difficult to prepare a bilayer structure with an organic layer and a QD interlayer through a solution process, because most solvents can dissolve and destroy the organic layer and QD interlayer. To present a more effective strategy for surpassing the limitations of traditional methods, we studied and fabricated the highly efficient iPSCs with mono-layered QDs as an effective multi-functional layer, to enhance the quantum yield caused by various effects of QDs monolayer. The mono-layered QDs play the multi-functional role as surface modifier, sub-photosensitizer and electron transport layer. Using this effective approach, we achieve the highest conversion efficiency of ~10.3% resulting from improved interfacial properties and efficient charge transfer, which is verified by various analysis tools.

• ALGAE
• /
• 제20권2호
• /
• pp.157-166
• /
• 2005

Uptake kinetics of Cd and Zn by leaves and rhizome of the seagrass Zostera marina were examined in controlled laboratory radiotracer experiments. Subsequently, acute toxicity of Cd, Cu and TBT on photosynthetic quantum yield (ΔF/Fm’ of Z. marina were determined, and the differential sensitivities of rapid light curve (RLC) to those harmful substances were also compared. All measurements on photosynthetic activity were determined by chlorophyll a fluorescence method using pulse amplitude modulation (PAM). Metal uptake by Z. marina was saturated with increasing exposure time in leaves and rhizomes. Uptake of Zn by Z. marina was faster than that of Cd. Metal uptake rates in Z. marina decreased with the increase of dissolved metal concentrations and also with the increase of biomass. The adverse effect of TBT on effective quantum yield was stronger than other pollutants. Average acute toxicity on the RLC of the seagrass exposed to TBT and two heavy metals (Cd and Cu) was going to decrease as follows: TBT > Cd > Cu. Our preliminary results in this study suggested that Z. marina potentially can be used as a biomonitor of harmful substances contamination in coastal waters.

• Bulletin of the Korean Chemical Society
• /
• 제7권2호
• /
• pp.120-124
• /
• 1986

In order to investigate effective solar energy conversion system, the light-induced electron transfer reactions have been examined across single-lamellar liposomes incorporated organic photosensitizers such as anthracene and naphthalene derivatives. We have observed photosensitized reduction of methyl viologen (1,1'-dimethyl-4,4'-$bipyridinium^{2+}$) dissolved in the exterior aqueous phase of the pigmented phospholipid liposomes when EDTA, as electron donor, is dissolved in the enclosed aqueous phase of the liposomes. The anthroyl stearic acid incorporated in the hydrophobic bilayer of liposomes leads to much less quantum yield for the photosensitized reduction of $MV^{2+}$ than the anthracene carboxylate incorporated in the outer hydrophilic layer. However, ${\beta}$-carotene with anthroyl stearic acid incorporated into the bilayer enhances the quantum yield significantly (${\Phi}{\simeq}0.2-0.3$), preventing the reverse reaction of electron transfer ($MV^+_\ {\rightarrow}MV^{2+}$) so that it might be useful for solar energy conversion into chemical energy. A naphthalene derivative, octadecyl naphthylamine sulfonic acid incorporated into the outer layer of liposomes results in less efficiency of $MV^{2+}$ reduction than anthroyl stearic acid. These results have been also tested with respect to lipid components of liposomes.

• 한국분말재료학회지
• /
• 제24권6호
• /
• pp.489-493
• /
• 2017

In this study, the surface passivation process for InP-based quantum dots (QDs) is investigated. Surface coating is performed with poly(methylmethacrylate) (PMMA) and thioglycolic acid. The quantum yield (QY) of a PMMA-coated sample slightly increases by approximately 1.3% relative to that of the as-synthesized InP/ZnS QDs. The QYs of the uncoated and PMMA-coated samples drastically decrease after 16 days because of the high defect state density of the InP-based QDs. PMMA does not have a significant effect on the defect passivation. Thioglycolic acid is investigated in this study for the effective surface passivation of InP-based QDs. Surface passivation with thioglycolic acid is more effective than that with the PMMA coating, and the QY increases from 1.7% to 11.3%. ZnS formed on the surface of the InP QDs and S in thioglycolic acid show strong bonding property. Additionally, the QY is further increased up to 21.0% by the photochemical reaction. Electron-hole pairs are formed by light irradiation and lead to strong bonding between the inorganic and thioglycolic acid sulfur. The surface of the InP core QDs, which does not emit light, is passivated by the irradiated light and emits green light after the photochemical reaction.

• 한국분말재료학회지
• /
• 제24권1호
• /
• pp.1-5
• /
• 2017

We have investigated the washing method of as-synthesized CdSe/ZnS core/shell structure quantum dots (QDs) and the effective surface passivation method of the washed QDs using PMMA. The quantum yield (QY%) of as-synthesized QDs decreases with time, from 79.3% to 21.1%, owing to surface reaction with residual organics. The decreased QY% is restored to the QY% of as-synthesized QDs by washing. However, the QY% of washed QDs also decreases with time, owing to the absence of surface passivation layer. On the other hand, the PMMA-treated QDs maintained a relatively higher QY% after washing than that of the washed QDs that were kept in toluene solution for 30 days. Formation of the PMMA coating layer on CdSe/ZnS QD surface is confirmed by HR-TEM and FT-IR. It is found that the PMMA surface coating, when combined with washing, is useful to be applied in the storage of QDs, owing to its long-term stability.

• 한국작물학회지
• /
• 제61권4호
• /
• pp.270-276
• /
• 2016

The objective of this study was to find a rapid determination of the hot air stress in maize (Zea mays L.) leaves using a portable chlorophyll fluorescence imaging instrument. To assess the photosynthetic activity of maize leaves, an imaging analysis of the photochemical responses of maize was performed with chlorophyll fluorescence camera. The observed chlorophyll imaging photos were numerically transformed to the photochemical parameters on the basis of chlorophyll a fluorescence. Chlorophyll a fluorescence imaging (CFI) method showed that a rapid decrease in maximum fluorescence intensity ($F_m$) of leaf occurred under hot air stress. Although no change was observed in the maximum quantum yield ($F_v/F_m$) of the hot air stressed maize leaves, the other photochemical parameters such as maximum fluorescence intensity ($F_m$) and Maximum fluorescence value ($F_p$) were relatively lowered after hot air stress. In hot air stressed maize leaves, an increase was observed in the nonphotoquenching (NPQ) and decrease in the effective quantum yield of photochemical energy conversion in photosystem II (${\Phi}PSII$). Thus, NPQ and ${\Phi}PSII$ were available to be determined non-destructively in maize leaves under hot air stress. Our results clearly indicated that the hot air could be a source of stress in maize leaves. Thus, the CFI analysis along with its related parameters can be used as a rapid indicating technique for the determining hot air stress in plants.

• Applied Biological Chemistry
• /
• 제43권2호
• /
• pp.130-135
• /
• 2000

유기인계 살충제 flupyrazofos의 수중 광분해 양상을 관찰하고자 다양한 조건에서 광분해율 및 분해 반감기 등을 조사하였다. 순수한 증류수 중에서 flupyrazofos는 광에 매우 안정하여 단순한 가수분해에 의한 감소가 관찰된 반면 감광제로 알려진 acetone처리 후 자연광 하에서 광분해율의 변화를 측정한 결과, 수중에 acetone의 함량이 0.047%, 몰 비가 0.006 이상이 되는 경우 flupyrazofos에 대한 광분해 촉진 효과가 발생할 것으로 예측할 수 있었다. Acetone이 처리된 경우, flupyrazofos의 광분해 반응은 광산화제인 singlet oxygen에 의해 분해율이 크게 영향 받는 것으로 확인되었으나 hydroxyl radical의 영향은 확인되지 않았다. Actinometer실험에서 2% acetone을 처리한 0.4ppm flupyrazofos의 양자수율(quantum yield)은 $17.66{\times}10^{-5}$이었으며 이때의 분해속도 상수는 0.038/hour이며, 분해 반감기는 18.2시간이었다.