• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.2
• /
• pp.154-161
• /
• 1998

The effects of melting temperature and holding time on the critical current density($J_c$) of $YBa_2Cu_3O_x$ based superconducting bulk fabricated by MPMG process were investigated. The amount of the formed $Y_2BaCuO_5$ phases increased with the melting temperature. However, the value of critical current density was highest at 1120 $^{\circ}C$. With this proper melting temperature, the effect of holding time on the critical characteristics was also investigated. In the case of Ag addition, the volume of the formed $Y_2BaCuO_5$ phase when the amount of Ag addition was 10 wt% and 20 wt% was observed to be highest at 20 minute and 40 minute respectively. But in the specimen without Ag, volume of $Y_2BaCuO_5$ phase increased as the holding time increased. The proper melting temperature and the holding time obtained were 1120 $^{\circ}C$ and 20 minute. The long holding time was not effective for the $J_c$ improvement as well as the formation of $Y_2BaCuO_5$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3062-3071
• /
• 2011

This study proposed to compare the performance differences between a manufacturing company and a construction company in accordance with the mutual relations and ownership structures with the management performance based on the increase or decrease of the large shareholders' share-holding ratio (insider ownership, foreign share-holding, institutional investors' share-holding) of a KOSPI listed company in Korea during 10 years(1998-2007). To sum up the research work, first, the increase of foreign share-holding supported the results of previous studies which foreign share-holding has a positive effect on the long term performance by having a positive(+) effect on MTB, and the increase of an insider ownership supported the management entrenchment hypothesis of previous studies by having a negative(-) effect on MTB. However, relations between institutional investors's share-holding and MTB could not find out linkages in spite of the results of previous studies where dealt with the active monitoring hypothesis. Also, to examine the linkages of ROA and the ownership structure, though the increases of foreign share-holding and insider ownership had a positive(+) effect on ROA, the increases of institutional investors' share-holding had a negative(-) effect on it. It showed different analysis results from the active monitoring hypothesis of institutional investors. As a result of verifying whether there is "any difference in the management performances between the construction industry and the manufacturing industry according to the equity structure" which is the second hypothesis, nothing of the insider ownership and whether or not there is the construction industry, foreign share-holding and whether or not there is the construction, and the institutional ownership and whether or not there is the construction industry gave a statistical difference to MTB and ROA. Accordingly, it was possible to find out there is no difference in the management performance between the construction industry and the manufacturing industry based on the ownership structure in spite of different characteristics from the manufacturing industry such as the revenue recognition in ordering, production and accounting.

• Journal of the Korean Society for Heat Treatment
• /
• v.29 no.5
• /
• pp.220-226
• /
• 2016

The mechanical properties of Ti-6Al-4V can be improved by microstructural control through the heat treatment in ${\alpha}+{\beta}$ region. The heat treatment was carried out with a variety of heat treatment temperatures and holding times to find the optimized heat treatment conditions and it was analyzed by linking the microstructural characteristics and mechanical properties. The part of ${\beta}$ phase with $10{\pm}2wt%$ vanadium was transformed into ${\alpha}^{{\prime}{\prime}}$ martensite phase after quenched, so the hardness and tensile properties were decreased below $900^{\circ}C$. The higher the heat treatment temperature is, the smaller is the vanadium-rich region, which leads to transformation into hcp ${\alpha}^{\prime}$ martensite above $900^{\circ}C$. The hardness and tensile properties were improved due to the hard ${\alpha}^{\prime}$ martensite. As the holding times were longer, the hardness and tensile properties decreased below $900^{\circ}C$ because of the softening effect by the grain growth. When varying the holding times above $900^{\circ}C$, the change of mechanical properties was slight because the softening effect of grain growth and the strengthening effect of ${\alpha}^{\prime}$ phase were counteractive. Therefore, the best conditions of heat treatment, which is in the range of $920{\sim}960^{\circ}C$, 40 min, WQ, can effectively improve the mechanical properties of Ti-6Al-4V.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.11
• /
• pp.233-239
• /
• 2010

The research which sees the fact that about model found of the duty factor whom follows in old person welfare facility worker holding office duration and organized performance researches in purpose. From theoretical background about the old person welfare facility system investigated a theory about the duty factor and organized performance of literature investigation and the old person welfare facility worker. A theory analysis of positive data led based on about the effect factor of the causality which the duty factor of the old person welfare facility worker reaches in organized performance under verifying boil the modulating effect of holding office duration. The repair which is a duty factor of the old person welfare facility worker, according to the holding office duration which is a personal quality factor job satisfaction the promotion and organized natural features, business environment and organized structure are organized performance and organization immersion and loyalty degree different assumed with the fact that will affect. From positive analysis about the research object verifies a suitable degree about demographics school register analytical and study model, structural equation model leads and construction verification and modulating effect analysis under executing boil.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.317-321
• /
• 2013

This study was conducted to investigate the antimicrobial effect of freely available chlorine (FAC) on the vase life of cut rose 'Brut' (Rosa hybrida L.). Postharvest treatments to extend the vase life of cut roses were divided into holding solution treatment and pulsing solution treatment. In holding solution treatment, the cut roses were treated with the preservative solutions containing FAC (0, 10, 20, and $40mg{\cdot}L^{-1}$) and sucrose (0 and 2%, w/v). In pulsing solution treatment, cut roses were dipped into the FAC solutions of 100, 200, and $400mg{\cdot}L^{-1}$ for 10 seconds. The longest vase life of cut roses was observed in the holding solution with FAC $20mg{\cdot}L^{-1}$ as 12 days, followed by pulsing with $400mg{\cdot}L^{-1}$ as 11 days, which were four or five days longer than the control. In addition, relative fresh weight and water uptake were the highest in the holding solutions with FAC 20 and $40mg{\cdot}L^{-1}$. The antimicrobial effect of FAC in vase solution was lasted for eight days after treatment, which was offset by sucrose addition. FAC contents in the FAC holding solution mixed with sucrose were exhausted by 88% two days after treatment, whereas only 15% of FAC was reduced in the holding solution without sucrose. This study indicated that FAC can be applied to extension of the postharvest life of cut roses by antimicrobial activity.

• Korean Institute of Interior Design Journal
• /
• v.20 no.1
• /
• pp.165-172
• /
• 2011

Visitors' behaviors within an exhibition space are a substantial means to grant spatial arrangement and validity of exhibits. Therefore, the study analyzed visitors' behaviors in the viewpoint of attraction power and holding power of exhibits on the basis of exhibition layout of real science museums. Through the analysis, the study grasped efficiency of analysis index and exhibition environment elements which might have an effect on planning the exhibition space of a large-scale museum and producing detailed ranges of exhibition. The main indicators used are: 1. Attraction power: it indicates the relative incidence of people who have stopped in front of an object/exhibit during the exhibition tour. It is calculated by dividing the number of people who stop by the total number of people who have visited the museum or gallery. 2. Holding power: it measures the average time spent in front of an information/communication element. It is calculated by dividing the average time of stay by the time "necessary" to read an element. As a result, It was expected that attraction power and holding power of exhibit would be increased when moving line of seeing was inductive. However, when the traffic movements of seeing was inductive, repetitive seeing of exhibit was almost never realized and visitors had a strong tendency which viewed on their way of moving without viewing on their way of stopping. On the other hand, it may mean that density of exhibit is low or size of exhibition space is small that most of exhibits within exhibition space have high attraction power and holding power. As Gwacheon National Science Museum, when a museum is composed of many large-scale exhibit halls, it should be formed by separating the main moving line of seeing from the optional moving line of seeing through visitors' natural choice of exhibit and proper inducement of moving line of seeing. In such structure, exhibition environment of the main moving line has an effect on attraction of exhibit and the use of optional moving line acts as a factor to increase attraction. In addition, it is thought that attribute of exhibit and proper arrangement of rest space within exhibition space will increase holding power of exhibit.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.3
• /
• pp.230-240
• /
• 2022

In general, a high tension on the anchor and chain is placed when a ship at anchor is subjected to heavy weather. Mariners have to pay attention to whether dragging anchor occurs to keep the safety of the ship at anchorage since it is difficult to maintain the stable motion of ship and it causes collisions with other ships nearby. In this paper, the ship motion against the external forces was shown to obtain the fundamental data about characteristic of holding power due to nature of seabed at anchor, so practical trials were carried out in rocky area and muddy area using a trial ship around coastal area of South Korea. In muddy seabed, holding power showed reasonable tension values depending on the distance from anchor position of continuing swing motions of a ship corresponding to wind force. Meanwhile in rocky seabed, tension values on the chain appeared very high occasionally regardless of the distance from the anchor position and seemed to exceed its holding power to be the breaking strain of the chain although weather was not in a severe condition. Therefore, some of the cables laid on the seabed were presumed to be caught in a crack on the rock. It is assumed that even a small amount of external force may cause the chain to break in a moment in rocky seabed. Additionally, wind and current forces had a somewhat contradictory effect on holding power of the ship between them.

• Transactions of Materials Processing
• /
• v.19 no.5
• /
• pp.296-304
• /
• 2010

It is still needed to study the effect of process conditions on the final properties of injection-molded parts for producing precision optical products. Especially, the optical anisotropy, i.e., birefringence, is a significant factor to affect the function of many optical components. In the present study we have focused on the effect of holding and compression processes on the birefringence remaining in the transparent disc by examining the gap-wise distribution of birefringence and extinction angle. As a result, two extra birefringence and extinction peaks near the center in thickness direction showed the effect of holding pressure, which came from the flow in packing stage. However, more uniform birefringence distribution than injection-only cases could be found in injection/compression cases. Depends on the process condition even the flow reversal could be found from the distribution of extinction angle. Finally, graphical representation of optical indicatrix was added for better understanding the final structure of injection-only and injection/compression cases.

• Journal of Welding and Joining
• /
• v.19 no.3
• /
• pp.325-333
• /
• 2001

The effect of base metal grain size on isothermal solidification behavior of Ni-base superalloy, CMSX-2 during transient liquid phase (TLP) bonding was investigated employing MBF-80 insert metal. TLP-bonding of single crystal. coarse-grained and fine-grained CMSX-2 was carried out at 1373∼1548k for various holding time in vacuum. The eutectic width diminished linearly with the square root of holding time during isothermal solidification process for single crystal, coarse-grained and fine-grained base metals. The completion time for isothermal solidification decreased in the order ; single crystal, coarse-grained and fine-grained base metals. The difference of isothermal solidification rates produced when bonding the different base metals could be explained quantitatively by the effect of base metal grain boundaries on the apparent average diffusion coefficient of boron in CMSX-2.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.445-448
• /
• 2005

Recently, injection molding process became more popular than ever to produce large quantities of high precision products or optical products. Injection molding products can cause sensorial problems because of high birefringence or deformation from the residual stresses in the optical media. In the present study, we have focussed on the effect of holding and compression pressures on the optical anisotropy remaining in the MOD by examining the gapwise distribution of birefringence and extinction angle The effect of holding pressure was found to form the inner two birefringence peaks. But the effect of compression pressure on the birefringence distribution was found to make the uniform distribution near the center in the gap-wise direction. Finally, the value of the birefringence near the wall decreased as the mold temperature increased.