• 한국지리정보학회지
• /
• 제7권3호
• /
• pp.118-125
• /
• 2004

본 논문은 향후 도시의 물리적 성장형태를 예측하고자 하는 일련의 연구로서 김해의 과거 도시 성장과정을 분석함으로써 김해지역에 적합한 셀룰라 오토마타의 네이버후드 및 전이규칙을 결정하는 것을 목적으로 한다. 동적모델과 시간에 따른 변화를 다룰 수 있는 셀룰라 오토마타를 도입하여 1987년부터 2001년까지 김해지역의 도시성장을 분석하였으며, 다양한 네이버후드와 전이규칙의 시뮬레이션을 통해 김해지역에 적합한 네이버후드와 전이규칙을 정립하였다. 결론으로 김해지역은 네이버후드의 행렬이 작을수록, 또한 동일한 거리를 가진 circle 형태보다 정사각형의 네이버후드가 적합하였고, 도시성장속도를 조절하는 ${\alpha}$값이 작을수록, 그리고 전환가능성 ($P_{ij}$) 이 클수록 적합한 것으로 나타났다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권4호
• /
• pp.492-499
• /
• 2009

A Silkie Bantam embryo fibroblast line (named SBF59 line) was successfully established by using direct explant culture and cryopreservation techniques. Cell morphology, viability, dynamic growth and contamination were tested and the karyotype and levels of isoenzymes of lactic dehydrogenase and malic dehydrogenase were analyzed. Four kinds of fluorescent protein extrogenes, including $pEGFP-N_3$, $pECFP-N_1$, $pEYFP-N_1$ and $pDsRed1-N_1$ were transfected into the cells. The results showed that the cells were healthy and possessed a fibrous structure without a change in morphology. The average viability of the cells was 96% before freezing and 90.5% after thawing. The growth curve appeared as typical "S" shape and the cell growth passed through a detention phase, a logarithmic phase and a platform phase; the estimated population doubling time (PDT) was 38.5 h; assays for the presence of bacteria, fungi, viruses and mycoplasmas were negative; the cell line showed no cross contamination when assessed by isoenzyme analysis; the chromosome number was 2n = 78 on more than 88% of occasions; four kinds of fluorescent protein extro-genes appeared to be expressed effectively with a high transfection efficiency between 18.3% and 42.3%. The cell line met the required quality control standard. It not only preserves the genetic resources of the important Silkie Bantam at the cellular level but also provides valuable materials for genomic, post-genomic, somatic cell cloning research and other applications.

• 한국분무공학회지
• /
• 제25권1호
• /
• pp.8-14
• /
• 2020

Recently, 1-D model-based engine development using virtual engine system is getting more attention than experimental-based engine development due to the advantages in time and cost. Injection rate profile is the one of the main parameters that determine the start and end of combustion. Therefore, it is essential to set up a sophisticated model to accurately predict the injection rate as starting point of virtual engine system. In this research, procedure of 1-D model setup based on AMESim is introduced to predict the dynamic behavior and injection rate of diesel injector. As a first step, detailed 3D cross-sectional drawing of the injector was achieved, which can be done with help of precision measurement system. Then an approximate AMESim model was provided based on the 3D drawing, which is composed of three part such as solenoid part, control chamber part and needle and nozzle orifice part. However, validation results in terms of total injection quantity showed some errors over the acceptable level. Therefore, experimental work including needle movement visualization, solenoid part analysis and flow characteristics of injector part was performed together to provide more accuracy of 1-D model. Finally, 1-D model with the accuracy of less than 10% of error compared with experimental result in terms of injection quantity and injection rate shape under normal temperature and single injection condition was established. Further work considering fuel temperature and multiple injection will be performed.

• Structural Engineering and Mechanics
• /
• 제43권5호
• /
• pp.607-621
• /
• 2012

The Expo Culture Centre is one of the permanent buildings at the World Expo 2010 in Shanghai, China. The main structure has an oval shape and consists of 36 radial cantilever steel trusses with different lengths and inner frames made of concrete-filled rectangular steel tube members. Tuned mass dampers are used to reduce the excessive vibrations of the sixth floor that are caused by human-induced resonance. A three-dimensional analytical model of the system is developed, and its main characteristics are established. A series of field tests are performed on the structure, and the test results show that the vertical vibration frequencies of most structural cantilevers are between 2.5 Hz and 3.5 Hz, which falls in the range of human-induced vibration. Twelve pairs of tuned mass dampers weighing 115 tons total were installed in the structure to suppress the vibration response of the system. These mass dampers were tuned to the vertical vibration frequency of the structure, which had the highest possibility of excitation. Test data obtained after the installation of the tuned mass dampers are used to evaluate their effectiveness for the reduction of the vibration acceleration. An analytical model of the structure is calibrated according to the measured dynamic characteristics. An analysis of the modified model is performed and the results show that when people walk normally, the structural vibration was low and the tuned mass dampers have no effect, but when people run at the structural vibration frequency, the tuned mass dampers can reduce the floor vibration acceleration by approximately 15%.

• Macromolecular Research
• /
• 제17권7호
• /
• pp.528-532
• /
• 2009

The size and shape of free volume (FV) holes available in membrane materials control the rate of gas diffusion and its permeability. Based on this principle, a segmented, thermo-sensitive polyurethane (TSPU) membrane with functional gate, i.e., the ability to sense and respond to external thermo-stimuli, was synthesized. This smart membrane exhibited close-open characteristics to the size of the FV hole and water vapor permeation and thus can be used as smart food packaging materials. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), positron annihilation lifetimes (PAL) and water vapor permeability (WVP) were used to evaluate how the morphological structure of TSPU and the temperature influence the FV holes size. In DSC and DMA studies, TSPU with a crystalline transition reversible phase showed an obvious phase-separated structure and a phase transition temperature at $53^{\circ}C$ (defined as the switch temperature and used as a functional gate). Moreover, the switch temperature ($T_s$) and the thermal-sensitivity of TSPU remained available after two or three thermal cyclic processes. The PAL study indicated that the FV hole size of TSPU is closely related to the $T_s$. When the temperature varied cyclically from $T_s-10{\circ}C$ to $T_s+10^{\circ}C$, the average radius (R) of the FV holes of the TSPU membrane also shifted cyclically from 0.23 to 0.467 nm, exhibiting an "open-close" feature. As a result, the WVP of the TSPU membrane also shifted cyclically from 4.30 to $8.58\;kg/m^2{\cdot}d$, which produced an "increase-decrease" response to the thermo-stimuli. This phase transition accompanying significant changes in the FV hole size and WVP can be used to develop "smart materials" with functional gates and controllable water vapor permeation, which support the possible applications of TSPU for food packaging.

• 수산경영론집
• /
• 제46권3호
• /
• pp.103-118
• /
• 2015

The purpose of this paper is to discuss possibilities of applying growth curve models, such as Logistic, Log-Logistic, Log-Normal, Gompertz and Weibull, to three specific technology areas of Fishery Science and Technology in the process of measuring their technology level between Korea and countries with the state-of-the art level. Technology areas of hazard control of organism, environment restoration, and fish cluster detect were selected for this study. Expert panel survey was conducted to construct relevant panel data for years of 2013, 2016, and a future time of approaching the theoretical maximum technology level. The size of data was 70, 70 and 40 respectively. First finding is that estimation of shape and location parameters of each model was statistically significant, and lack-of-fit test using estimated parameters was statistically rejected for each model, meaning all models were good enough to apply for measuring technology levels. Second, three models other than Pearl and Gompertz seemed very appropriate to apply despite the fact that previous case studies have used only Gompertz and Pearl. This study suggests that Weibull model would be a very valid candidate for the purpose. Third, fish cluster detect technology level is relatively higher for both Korea and a country with the state-of-the-art among three areas as of 2013. However, all three areas seem to be approaching their limits(highest technology level point) until 2020 for countries with the state-of-the-art. This implies that Korea might have to speed up her research activities in order to catch up them prior to 2020. Final suggestion is that future study may better apply various and more appropriate models respectively considering each technology characteristics and other factors.

• 청정기술
• /
• 제18권4호
• /
• pp.331-340
• /
• 2012

최근 콜로이드 산업에서 기능성 입자의 수요가 증가함에 따라 입자의 제조방법은 상당한 발전을 이루었다. 이러한 발전은 동적/정적 미세유체 시스템을 도입함으로써 이루어졌으며 입자의 크기, 형태, 다공성, 표면의 거칠기 또는 기능성 등 물리적, 화학적인 형상제어를 가능하게 해주었다. 이러한 형상제어를 통하여 만들어진 기능성 입자는 의료진단, 광소자, 바이오산업으로 응용될 수 있다. 뿐만 아니라, 기능성 콜로이드 입자의 자가조립을 유도함으로써 규칙적인 정렬부터 불규칙적인 새로운 형태의 기능성을 갖는 물질을 얻을 수 있고, 자연계에서 일어나는 현상을 모사함으로써 본질적인 연구도 가능하게 해주었다. 그리하여 본 총설에서는 최근 각광받고 있는 기능성 콜로이드 입자의 제조방법에 대해 설명하고 이의 응용 가능성을 소개하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권4호
• /
• pp.1-8
• /
• 2016

최근의 건축물은 복합적인 기능과 형태를 보이고 있으며, 크기가 거대해짐에 따라 구조물 건전성 감시(Structural Health Monitoring)기술의 수요 또한 증가하고 있다. 구조물마다 고유한 동특성을 가지고 있으며, 다양한 외력의 영향을 받기 때문에 구조물의 건전성을 평가하는 다양한 방법들이 연구되고 있다. 전문가에 의지하여 접근 가능한 지점에 대한 육안 검사 및 비파괴 검사를 벗어나 사각지대가 없는 온라인 계측 시스템의 구비와 함께 자동으로 위험요소를 검출하는 시스템이 요구되고 있다. 본 연구에서는 비선형적인 구조물의 응답을 고려하기 위해 관리도 기법, 평균제곱근편차, 일반 극치 분포 등과 같은 통계적 기법을 이용하여 이상거동을 판별에 활용할 수 있는 신호 특징 추출과 적응형 임계치 설정 알고리즘을 제안하였으며, 강제진동 실험과 실제 운용중에 있는 구조물의 지진 계측 시스템의 가속도 응답을 이용하여 성능을 검증하였다.

• Smart Structures and Systems
• /
• 제31권1호
• /
• pp.89-100
• /
• 2023

This paper conducts a parametric study of a new tuned mass damper with pre-strained superelastic SMA helical springs (SMAS-TMD) on the vibration reduction effect. First, a force-displacement relation model of superelastic SMA helical spring is presented based on the multilinear constitutive model of SMA material, and the tension tests of the six SMA springs fabricated are implemented to validate the mechanical model. Then, a dynamic model of a single floor steel frame with the SMAS-TMD damper is set up to simulate the seismic responses of the frame, which are testified by the shaking table tests. The wire diameter, initial coil diameter, number of coils and pre-strain length of SMA springs are extracted to investigate their influences on the seismic response reduction of the frame. The numerical and experimental results show that, under different earthquakes, when the wire diameter, initial coil diameter and number of coils are set to the appropriate values so that the initial elastic stiffness of the SMA spring is between 0.37 and 0.58 times of classic TMD stiffness, the maximum reduction ratios of the proposed damper can reach 40% as the mass ratio is 2.34%. Meanwhile, when the pre-strain length of SMA spring is in a suitable range, the SMAS-TMD damper can also achieve very good vibration reduction performance. The vibration reduction performance of the SMAS-TMD damper is generally equal to or better than that of the classic optimal TMD, and the proposed damper effectively suppresses the detuning phenomena that often occurs in the classic TMD.

• 한국해안해양공학회지
• /
• 제12권3호
• /
• pp.139-148
• /
• 2000

본 연구에서는 유체가 채워진 착저식 유연막 구조물과 파와의 상호작용 문제를 유탄성 이론을 사용하여 살펴보았다. 먼저 동역학적 문제를 풀기에 앞서 유체로 채워진 유연막 내부에 일정한 압력이 작용하였을 때, 유연막의 형상과 막에 작용하는 초기장력을 정역학문제를 풀어 구한다. 동역학적 문제를 풀기 위하여 유체영역을 내부영역과 외부영역으로 나누어, 내부영역을 유연막을 경계로 영역 1과 영역 2로 다시 나눈다. 내부영역에서는 경계요소법을 사용하여 파동장을 풀고, 외부영역에서는 고유함수전개법을 사용하여 해를 구한다. 두 영역이 만나는 정합면에서 이미 구한 해를 정합시켜 완전한 해를 구한다. 유연막의 거동은 원주 좌표계를 사용하여 유도된 선형화된 막방정식을 사용하여 이때 외력은 영역 1과 영역 2의 압력차로 주어지므로 영역 1과 영역 2의 해는 막방정식을 통하여 연성된다. 유체가 채워진 착저식 유연막 방파제의 성능에 미치는 중요한 변수로는 유연막의 형상(폭, 높이)과 유연막 내부압력, 유체의 밀도이다. 설계변수들을 바꿔가면서 유연막에 의한 파랑제어 효과를 투과율을 통하여 살펴보았다. 또한 파의 입사각도에 따른 파랑제어 효과를 함께 고찰하였다. 수치계산결과는 Ohyama의 실험결과와 비교하였고 두 결과는 정량적인 값 차이가 나지만 정성적으로 일치하고 있음을 확인하였다. 적절히 설계된 유연막은 소형어항 보호용이나 레저용 방파제로 활용할 수 있는 가능성을 발견하였다.