• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.356-360
• /
• 2007

Recently, dye sensitized solar cells (DSSCs) composed of nanoporous $TiO_2$, light-sensitive dyes, electrolytes, and counter electrode have been received much attention. Nanostructured particles with higher surface area for the higher adsorption of Ru (II) dye are required to increase the quantity of light absorption. Also, it has been reported that the key factor to achieve high energy conversion efficiency in the photoelectrode of DSSC is the heat treatment of $TiO_2$ paste with acid addition. In this work, we investigated the influence of acid treatment of $TiO_2$ solar cell on the photovoltaic performance of DSSC. The working electrodes fabricated in this work were characterized by X-ray photoelectron spectroscopy (XPS), extended X-ray absorption fine structure (EXAFS), field emission scanning electron microscope (FE-SEM), and atomic force microscope (AFM). In addition, the influence of nanostructured photoelectrode fabricated with the acid-treated paste on the energy conversion efficiency was investigated on the basis of photocurrent-potential curves. It was found that the influence of acid-treated paste on the photovoltaic efficiency was significant.

• Molecular & Cellular Toxicology
• /
• v.3 no.2
• /
• pp.107-112
• /
• 2007

o-Nitrotoluene is used to synthesize artificial dyes and raw materials of urethane resin. In this study, we have carried out in vitro genetic toxicity tests and microarray analysis to understand the underlying mechanisms and the mode of action of toxicity of onitrotoluene. TA1535 and TA98 cells were treated with o-nitrotoluene to test its toxicity by basic genetic toxicity test. Ames and two new in vitro micronucleus and COMET assays were applied using CHO cells and L5178Y cells, respectively. In addition, microarray analysis of differentially expressed genes in L5178Y cells in response to o-nitrotoluene was analyzed using Affymatrix genechip. The result of Ames test was that o-nitrotoluene treatment did not increase the mutations both in base substitution strain TA1535 and in frame shift TA98. o-Nitrotoluene has not increased micronuclei in CHO cells. But onitrotoluene increased DNA damage in L5178Y cell. Two-hundred two genes were initially selected as differentially expressed genes in response to o-nitrotoluene by microarray analysis and forty four genes among them were over 2 times of log fold changed. These forty four genes could be candidate biomarkers of genetic toxic action of o-nitrotoluene related to induction of mutation and/or induction of micronuclei and DNA damage. Further confirmation of these candidate markers related to the DNA damage will be useful to understand the detailed mechanism of action of o-nitrotoluene.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.333-338
• /
• 2020

Dye markers are used in the study of subterranean termites to determine colony territories and population sizes. Dyes not only allow the study of termite biology, but can also be used for control purposes. Although Reticulitermes speratus kyushuensis causes damage to wooden historical properties in Korea, the dye markers have not been applied. Therefore, we evaluated the applicability of Nile Blue A dye for R. s. kyushuensis. Filter papers dyed with concentrations of 0.05%, 0.10%, and 0.25% (w/w) were each fed to termite populations through a no-choice feeding test for 1, 3, or 7 days. After 4 weeks, the survival rate, dyeing rate, and maintenance of dyeing were recorded. The results showed high survival rates with lower dye concentrations and shorter feeding periods. Among the combinations of concentrations and days, high survival rates, dyeing rates, and dyeing maintenance periods were found at concentrations of 0.05% and 0.10% for 3 days of feeding. These maximized the survivorship and visibility. The results from the current study can be applied to investigate the ecology and control of R. s. kyushuensis in both the laboratory and field.

• Science of Emotion and Sensibility
• /
• v.12 no.1
• /
• pp.109-120
• /
• 2009

This study was carried out in order to investigate color sensation and sensibility for yellowish natural dye fabrics and reddish ones and to establish prediction models for color sensibility factors of them by color sensation and the related physical measurements focusing on 40s middle-aged people. Eight fabric stimuli which were dyed with a variety of yellowish or reddish natural dyes was subjectively evaluated in terms of color sensation and sensibility by 40s aged participants. As results, three color sensibility factors including 'Active', 'Characteristic', and 'Relax' were extracted and they were examined in respect of their relationships with color sensation and physical color properties. Color sensibility factor 'Active', the dominant factor for the naturally dyed fabrics was explained by $L^*$ and sensation 'Deep' in its predictive model and a yellowish fabric dyed with 300% solution of armur cork unmordanted was perceived the strongest in the factor. Factor 'Characteristic' was predicted by both $a^*$ and sensation 'Light' and reddish natural dye fabrics tended to be felt more strongly for it. Color sensation 'Strong' was the only predictor for factor 'Relax' in that naturally dyed fabrics with lower values for the sensation seemed to show higher 'Relax' factor and a reddish fabric dyed with safflower 125% was the highest for the color sensibility factor. These results could be utilized to design color-sensible natural dye fabrics for middle-aged people.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.1-7
• /
• 2017

Polydimethylsiloxane (PDMS) can be deposited on various substrates using chemical vapor deposition process, which results in the formation of PDMS thin films with thickness below 5 nm. PDMS layers can be evenly deposited on surfaces of nanoparticles composed of various chemical compositions such as $SiO_2$, $TiO_2$, ZnO, C, Ni, and NiO, and the PDMS-coated surface becomes completely hydrophobic. These hydrophobic layers are highly resistant towards degradation under acidic and basic environments and UV-exposures. Nanoparticles coated with PDMS can be used in various environmental applications: hydrophobic silica nanoparticles can selectively interact with oil from oil/water mixture, suppressing fast diffusion of spill-oil on water and allowing more facile physical separation of spill-oil from the water. Upon heat-treatments of PDMS-coated $TiO_2$ under vacuum conditions, $TiO_2$ surface becomes completely hydrophilic, accompanying formation oxygen vacancies responsible for visible-light absorption. The post-annealed $PDMS-TiO_2$ shows enhanced photocatalytic activity with respect to the bare $TiO_2$ for decomposition of organic dyes in water under visible light illumination. We show that the simple PDMS-coating process presented here can be useful in a variety of field of environmental science and technology.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.1
• /
• pp.24-39
• /
• 2000

Various methods and graft materials have been used to fill in the defect adjacent to the implants and considered as clinically acceptable. But it is not clear whether the regenerated bone increases the implant-bone contact and supports the implant. The purpose of this study is to evaluate regenerated bone surrounding implants using bone morphogenetic protein(BMP) and demineralized freeze-dried bone(DFDB), and the interfaces between implants and regenerated bone. bBMP was extracted and partially purified from the bovine bone matrix using heparine chromatography. Demineralized freeze-dried bone was made from the dog. Inactive insoluble collagenous bone matrix(IBM) of dog was used as carrier of bBMP. Interfaces of titanium coated epoxy resin implants were processed for demineralized section for transmission electron microscopy(TEM) and those of screw type implants were for nondemineralized section for light and fluoromicroscopic examination. Implants were inserted in the inferior border of mandible of adult dogs and artificial bony defects($3{\times}3{\times}4mm$) were made at the mesial and distal side of implants. Defects were filled with BMP(BMP group) and DFDB(DFDB group). For the fluoromicroscopic examination, the fluorescent dyes(oxytetracycline, calcein green, alizarin red) were injected 2, 4, 6, 8, 12 weeks after implantation. The experimental animals were sacrificed at the 6th and the 12th week and their mandible were extirpated and processed for examination with light microscopy, fluoromicroscopy and TEM. The obtained results were as follows : 1. By the light microscopic findings, the defects were filled with woven bone at the 6th week and compact bone at the 12th week, and the osseointegrations were seen in both groups. There was no histological difference between them. 2. On the basis of the histomorphometric analysis, BMP group(6th week: 40.25%, 12th week: 56.04%) had higher bony contact ratio than DFDB group(38.37%, 42.63%). There was significant difference between two groups at the 12th week(p<0.05). 3. The amount of bone formation in BMP group was more prominent than in DFDB group. Significant difference was noted among two groups at the 6th and the 8th week(p<0.05). 4. By the transmission electron microscopic findings, $0.4-2{\mu}m$ soft tissue layer was found in adjacent to the interfaces and over the collagen fibrils of bone at the 6th week. However, about 100nm amorphous layer was noted at the interface or collagen fibrils directly extended to the titanium surface at the 12th week. There was no significant difference between two groups. 5. These results suggest that BMP and DFDB can be used as good graft materials in the regeneration of bone adjacent to implant, and BMP is more valuable as a bone inducer than DFDB.

• The Korean Journal of Mycology
• /
• v.43 no.4
• /
• pp.239-246
• /
• 2015

Two fungal strains were isolated from rods of Quercus sp. (NAAS02335) and Pinus densiflora (NAAS05299) in Korea. These strains were identified as Gyrodontium sacchari by their morphological and mycological characteristics. The optimal growth temperature of NAAS02335 and NAAS05299 are $25^{\circ}C$ and $30^{\circ}C$, respectively. Production of cellulase, xylanase, and ligninase was tested on agar media supplemented dyes or substrates. Production of cellulase and xylanase of NAAS05299 was higher than those of NAAS02335, however ligninase activity of NAAS02335 was higher than that of NAAS05299. The activities of cellulase, xylanase, and amylase of strain NAAS05299 were estimated at 6.7~10.2 times higher than that of NAAS02335. Laccase activity was only estimated by strain NAAS02335. The lignocellulytic enzymes are induced by substrates such as rice straw, wooden chips of pine, oak, and poplar. The NAAS05299 was able to degrade filter paper completely after 4 weeks of culturing in liquid media containing a piece of filter paper at $28^{\circ}C$ with continuous shaking. NAAS05299 was able to degrade rice straw, pine chips, and oak chips after 4 months in solid culture, however NAAS02335 decomposed only rice straw among tested 4 kinds of biomass.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.588-588
• /
• 2013

Nanoscale noble-metals have attracted enormous attention from researchers in various fields of study because of their unusual optical properties as well as novel chemical properties. They have possible uses in diverse applications such as devices, transistors, optoelectronics, information storages, and energy converters. It is well-known that nanoparticles of noble-metals such as silver and gold show strong absorption bands in the visible region due to their surface-plasmon oscillation modes of conductive electrons. Silver nanocubes stand out from various types of Silver nanostructures (e.g., spheres, rods, bars, belts, and wires) due to their superior performance in a range of applications involvinglocalized surface plasmon resonance, surface-enhanced Raman scattering, and biosensing. In addition, extensive efforts have been devoted to the investigation of Gold-based nanocomposites to achieve high catalytic performances and utilization efficiencies. Furthermore, as the catalytic reactivity of Silver nanostructures depends highly on their morphology, hollow Gold nanoparticles having void interiors may offer additional catalytic advantages due to their increased surface areas. Especially, hollow nanospheres possess structurally tunable features such as shell thickness, interior cavity size, and chemical composition, leading to relatively high surface areas, low densities, and reduced costs compared with their solid counterparts. Thus, hollow-structured noblemetal nanoparticles can be applied to nanometer-sized chemical reactors, efficient catalysts, energy-storage media, and small containers to encapsulate multi-functional active materials. Silver nanocubes dispersed in water have been transformed into Ag@Au nanoboxes, which show highly enhanced catalytic properties, by adding $HAuCl_4$. By using this concept, $SiO_2$-coated Ag@Au nanoboxes have been synthesized via galvanic replacement of $SiO_2$-coated Ag nanocubes. They have lower catalytic ability but more stability than Ag@Au nanoboxes do. Thus, they could be recycled. $SiO_2$-coated Ag@Au nanoboxes have been found to catalyze the degradation of 4-nitrophenol efficiently in the presence of $NaBH_4$. By changing the amount of the added noble metal salt to control the molar ratio Au to Ag, we could tune the catalytic properties of the nanostructures in the reduction of the dyes. The catalytic ability of $SiO_2$-coated Ag@Au nanoboxes has been found to be much more efficient than $SiO_2$-coated Ag nanocubes. Catalytic performances were affected noteworthily by the metals, sizes, and shapes of noble-metal nanostructures.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.67-74
• /
• 2016

The Prussian Blue Analogue(PBA) has three dimensional structure and the metal - organic framework material, and it has a variety configurations depending on the type of organic ligands. PBA has been receving an attention in the fields of biosensors, optical, catalytic, and hydrogen storage device. Also, it is an environmental friendly substance with a chemical stability. In addition, PBA is widely used in the filed of adsorption art since we can adjust the size of the fine pores. In this study, we synthesized $Mn_3[Fe(CN)_6]_2$, an organometallic framework chains by using a hydrothermal synthesis method. We used $K_4[Fe(CN)_6]$ and $MnCl_2$ as precursors. We also produced a manganese iron oxide, by baking the synthesized material. The effect of the size and shape of the particles was examined by controling pH of the precursor solution, the molar concentration of the precursor, and reaction time as the experimental variables. Synthesized absorbent was analyzed by XRD, SEM, FT-IR, UV-Vis, and TG / DTA to evaluate the adsorption properties of several dyes.

• Journal of the Korean Chemical Society
• /
• v.9 no.4
• /
• pp.179-184
• /
• 1965

Korean acid clays and Japanese acid clay were 1 N KCl solution and then their acidities were determined by measuring pH of the filtrates produced. And on examining the effect of neutral salt solution, such as KCl, NaCl, $BaCl_2,\;Pb(NO_3)_2\;and\;CuSO_4$, on the acidity, it was found that the effect decreased in order mentioned above and this situation proved to be in accord with Lyotrope series, i.e., the order of $K^+>Na^+>Ba^{++}>Pb^{++}>Cu^{++}.$ And after adsorbing cation, $Al_2O_3\;and\;Fe_2O_3$ which dissolved out of acid clay were measured, with the result that the amounts dissolved out were nearly proportional to acidity. This result accords with Kobayashi and Yamamoto's theory that the cause for acidity of clays is due to the fact that HCl which is formed initially by exchange of cation reacts with solid clay, and then chlorides dissolved out bring about hydrolysis, then resulting in the second formation of HCl. On measuring the rate which acid clay adsorbed dye in aqueous solution of basic and acid dyes, it was found that acid dye had no relation to acidity, and though it was not adsorbed by acid clay, the adsorption rate of basic dye was proportional to acidity. After adsorbing basic dye, pH was proportional to both acidity of solid acid and its adsorption rate of dye. Hence, it was concluded that the adsorption of basic dye was in accord with adsorption mechanism of neutral salt. This study led to find the acidic cause of solid acid and its adsorption mechanism of dye in aqueous solution.