• 한국의상디자인학회지
• /
• 제19권2호
• /
• pp.39-48
• /
• 2017

Transfer printing is a method to combine printing and dyeing technology by the use of sublimation. It is an environmentally-friendly printing method that saves costs, reduces the production processes by the omission of the washing process, and saves time by maintaining quality. Due to the development of transfer printing, a high value added printing technology is available now but color fastness to sublimation of the printing products is still low since there are few dyes that have an affinity to the fabrics and the application technology is still inadequate. Specially, in case of high concentration black dyes, eco-label type black dyes, which is a substitution for general dispersal dyes, have been developed while general dispersal black dyes are still used, creating issues such as color differences on the surface and back side of the fabrics and contamination by friction after transfer printing. There are also some restricted substances such as allergens. To address these issues, high concentration black dyes and application technology that are environmentally-friendly and that have over 16 K/S through the use of single dyes with excellent color fastness, fixation ability, and similar melting temperature were developed for this study.

• 한국잠사곤충학회지
• /
• 제28권2호
• /
• pp.61-64
• /
• 1986

몇 종의 식물자료에서 추출한 염액으로 견을 염색하여 색채를 조사하고 염색견에 3종의 매염제처리를 한 후 세탁 및 내광견도를 조사한 결과는 다음과 같다. 1. Tannin계 및 뽕나무뿌리로 염색한 견포의 색채는 연한 다색계통이었으며 염색견포에 황산동 및 황산제일철로 매염처리하면 색상(Hue)은 염재의 종류에 따라 각각 다르게 변화되었고 명도 및 채도(V/V)는 모두 감소되었다. 2. Tannin계 및 뽕나무뿌리로 염색한 견포에 황산동 및 황산제일철로 매염처리하면 미매염견에 비하여 세탁견도가 1급내외 향상되었고 매염처리견의 자외선조사에 의한 dye-loss율이 미매염처리 견보다 크게 감소되어 내광견도가 향상되었다.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.233-240
• /
• 2019

Dyeing is an essential process for improving the value of textile products, but it is considered as one of industries causing pollution because of producing wastewater containing hazardous chemicals as well as using a large amount of water and energy. Global demand for greener technologies in textile field is getting much more attention and accordingly, the use of eco-friendly natural dyes is growing much larger. In textile printing, both dyes and pigments can be used. Pigment printing is more simple process and requires less water and less energy, compared to dye printing. In this study, the organic pigment was prepared from the marigold colorant. Samples were stencil printed, pressed(70℃, 3min) and then heat treated(150℃, 5min). The uptake of polyacrylic acid as a chemical binder was the lowest. In particular, marigold pigments were excellent in color and texture when Guar Gum and Sodium Alginate were used as binders. In addition, the light and washing fastness was rated very high as 4, 4/5 grades, and the rubbing fastness was also excellent as 3 and 4 grades.

• 한국의류학회지
• /
• 제25권1호
• /
• pp.3-12
• /
• 2001

The dyeing powder drawn out from Dryopteris crassirhizoma by water was concentrated. Using this powder, the silk and the cotton fabrics were dyed and they measured with the K/S value, surface color, mordant quantity in order to evaluate the dyeability, antimicrobial and deodorant properties. The colorant of Dryopteris crassirhizoma was proved flavonoids by FT-IR spectrum. The K/S values of silk were much higher than those of cotton, the color yield of the silk and cotton fabric were most efficient the postmordanting method. The surface colors on the dyed fabric depended heavily upon mordants used or mordanting methods. For all cases, the value of the dyed fabric was generally dark. The chroma produced clear for the Al-mordant of silk and the Cu-mordant of cotton in the 3% concentration of mordants, the color difference was distinct when using the Fe-mordant. The K/S values of cationized cotton were much higher than cotton. The color fastness was significantly improved when mordants were added, In the case of the light fastness, Fe and Cu-mordants improved more than 1 level. The Cu-mordant showed the greatest antimicrobial and deordarant activity on both of the silk and the cotton.

• 한국의류학회지
• /
• 제27권5호
• /
• pp.517-523
• /
• 2003

We studied the physical properties of silk fabrics after degumming, the dyeability and the color fastness of silk fabrics after degumming and sericin fixing. As the sericin was removed from silk fabrics, the rate of weight loss increased and both the abrasion resistance and the drape coefficient decreased. This means that the amount of the sericin remained in silk fabrics significantly affects the physical properties of silk fabrics. On the surface and the cross-section of silk fabrics, the silk fibers enclosed by the sericin seemed to be in a lump shape. Each fibroin strand, however, got scattered, as the process of degumming went through. The dyeability of silk fabrics degummed decreased at between 20$^{\circ}C$∼80$^{\circ}C$ the dyeing temperature, on the other hand, it significantly increased over 80$^{\circ}C$. The dyeability of the sericin-fixed silk fabrics was lower than that of the non-serin-fixed silk fabrics, to a little extent. The colorfastness of crocking in the dyed-silk fabrics was a little low and that of the sweat was much lower in a basic sweat. Especially, the colorfastness of the partially degummed silk fabrics was low, because the sericin was not stable in the condition of sweat. Therefore, the process of sericin fixing is essentially required, for the partially degummed silk fabrics and the process of degumming itself.

• Journal of the Korean Wood Science and Technology
• /
• 제45권3호
• /
• pp.297-307
• /
• 2017

폐MDF 재생섬유를 인테리어 소품 제조용 원료로 이용하기 위해 MDF 제조용 리기다소나무 버진섬유와 MDF를 제조한 후 재해섬한 재생섬유에 대해 빨강, 노랑 및 파랑색 계열의 Bis-monochlorotriazine (MCT)계와 Vinyl sulfone(VS)계의 반응성염료, Anthraquinone계의 배트염료, Diazo계열의 직접염료 및 치자와 소목의 천연염료에 의한 염색 특성 및 일광견뢰도를 검토하였다. 염색 전의 버진섬유와 재생섬유의 색상은 각각 4.2YR과 4.4YR로 약간의 적색기가 있는 황색을 나타내고 있었으며, 재생섬유가 버진섬유에 비해 $L^*$의 값이 작아 약간 더 어두웠다. 적, 청, 황색계의 MCT계와 VS계의 반응성염료, 배트 염료, 직접염료 모두 버진섬유와 재생섬유에 관계없이 염색은 매우 양호하게 잘 이루어졌다. 재생섬유가 버진섬유보다 염착량은 약간 높았고, $L^*$와 V의 값은 약간 감소하였으나, 큰 차이는 없었다. 일광견뢰도는 염료에 따라 약간의 차이는 있으나 버진염색섬유가 재생염색섬유보다 더 큰 색차를 보이고 있어 불량하였다. 소목으로 염색한 재생섬유와 버진섬유의 색상은 각각 4.4YR과 4.0YR로 염색 전의 미염색 섬유와 거의 차이가 없었으나, 치자로 염색한 섬유의 색상은 각각 7.4YR과 6.9YR로 황색계의 반응성염료, 배트염료 및 직접염료보다 큰 색차를 보여 염색성은 우수하였으나 일광견뢰도는 불량하였다.

• 한국의류학회지
• /
• 제33권12호
• /
• pp.1971-1978
• /
• 2009

본 연구는 염색 공정의 표준화와 재현성을 확립하기 위해 홍화 황색소의 모섬유에 대한 염색성을 조사하는데 목적이 있다. 홍화 황색소는 물로 추출한 후 농축, 동결건조하여 분말상태로 만들어 사용하였다. 염색 온도 및 시간, 염료 농도, 염액의 pH 등에 따른 염착성과 색상 변화에 대해 조사하였으며, 세탁 및 일광견뢰도를 평가하였다. 염착량은 $50^{\circ}C$까지 서서히 증가하다가 이후 급격히 증가하여 $90^{\circ}C$에서 최고 값을 나타냈다. 염착은 초기 10분 이내에 빠르게 일어났으며 이후 서서히 증가하다가 40~60분 사이에 평형에 도달하였다. 염료 농도가 증가함에 따라 염착량이 계속 증가하여 점점 진하고 어두운 노랑색이 되었다. 산성 조건에서 염착이 잘 되었으며 pH 3.0에서 최대염착량을 보였다. 얻은 결과를 근거로 최적 염색 조건은 $90^{\circ}C$, 40분, pH 3.5으로 설정하였으며, 최적 조건에서 염색한 시료들 간의 색차는 0.53~1.75로서 재현성이 우수하였다. 후매염은 염착성 증진에 효과가 없었으나, 다양한 톤과 농담의 노랑색을 얻을 수 있었다. 세탁(드라이크리닝)견뢰도는 4/5등급으로 좋은 편이었으나 20시간 조사 후 일광견뢰도는 Fe과 Cu매염한 경우 3/4등급으로 색차가 가장 적었다. 결과를 종합해 볼 때 매염제가 색상톤을 다양하게 하는 효과는 있었지만, 염착량과 견뢰도 향상에 기여하지 못하였다. 홍화 황색소는 모염색에서 매염제 없이 만족스러운 결과를 얻을 수 있고, 따라서 환경에 피해를 주지 않을 것으로 사료된다.

• 한국잠사곤충학회지
• /
• 제28권1호
• /
• pp.72-78
• /
• 1986

견에 대한 오배자탄닌과 합성탄닌의 처리조임이 견의 탄닌증량율에 미치는 영향과 탄닌증량견의 염색조건 및 실용적 특성을 구명하기 위하여 시험결과 1. 견의 증량율을 기안한 합리적인 탄닌처리 농도는 오배자 30g/l, 합성탄닌산 15g/l이었고, 처리온도 및 시간은 8$0^{\circ}C$에서 60분 내외 처리용액의 산도는 pH 2-3이었다. 2. 탄닌처리 견의 염색조건에 있어서 부착된 탄닌의 탈락을 적게하며 염착농도(K/S)를 향상시킬 수 있는 OrangeII에 의한 합리적 염색온도 및 시간은 6$0^{\circ}C$, 90분이었다. 3. 탄닌염색 가공견포의 Soaping에 의한 색착($\Delta$E)는 미가공 견포에 비하여 현저히 감소됨으로서 세탁견도가 2급이나 향상되었다. 4. 탄닌 염색가공 견포의 자외선 조사에 의한 dyeloss율은 무처리염색견포의 1/6정도로 감소됨으로서 탄니처리 견포의 내광성이 현저히 개선되었다. 5. 탄닌 염색가공 견포의 마찰견도와 발수성은 미가공 견포와 같은 수준이었으나 Drape계수는 감소됨으로서 의복의 착용감이 향상되었다.

• 패션비즈니스
• /
• 제20권3호
• /
• pp.119-132
• /
• 2016

Weighting of silk fabrics have long been practiced in silk fabric trading based on the primary consideration of price-weight, and secondary one of quality improvement in handle, luster, and drape properties. Recent trend of practicing weighting of silk fabrics is, however, focused on the improvement of the handle, luster, drape, and other properties. During the finishing processes of synthetic fiber, nylon, comprising amide structure, include the use of tannic acid, especially in the dyeing. A multitude of studies are being implemented in terms of improving fastness to washing, fastness to light of dyed nylon product, or the light fastness of nylon 6 itself. In this study, the effects of various tannic acid treatments on the physical properties related to the handle of nylon 6 and silk fabrics are examined and reviewed. The effects of treatment condition of the tannic acid, e.g., the concentration of the aqueous tannic acid solution, treatment time, and temperature were investigated. As the concentration of the aqueous solution of tannic acid increased, the bending rigidity values of the silk and nylon 6 fabrics increased. The treated fabrics felt stiff to the touch. Within the mild conditions of bending employed in the bending measurement of KES, nylon 6 treated fabric specimen exhibited a trend of improvement of bending resiliency within the range of small bending deformation. The weight of treated fabrics have all increased. The air-permeability values decreased as the treatment concentration increased. However, the decrease tendency of air permeability values may be alleviated by adjusting the fabric count during the tentering or expanding processes, either by tension adjustment or heat treatment. Optimum conditions of the treatment for nylon 6 are 1.25% tannic acid concentration, bath temperature of $85^{\circ}C$, pH 3.1, and those for silk fabric treatment are 1.25% tannic acid concentration, bath temperature of $85^{\circ}C$, pH 3.1. The treatment conditions will lead to the improvement in the properties of fabrics for summer.

• 한국의류산업학회지
• /
• 제20권5호
• /
• pp.608-615
• /
• 2018

The purpose of this study is to investigate the dyeability and functional properties of dyed fabric with the extract of Myrica rubra rind. For this purpose, the ultraviolet and visible spectra of the bark extracts were investigated. The dyeing temperature, dyeing time, mordant type, mordanting order, mordant concentration and dyeability were investigated. The color fastness based on washing, dry-cleaning, rubbing and light were evaluated by the types of Myrica rubra rind extract used. In addition, the deodorization and antibacterial activity were measured, and the functionality of the silk fabric dyed with the extract of the Myrica rubra rind was evaluated. The result shows that the color strength of the dye was excellent when the Myrica rubra rind was dyed at $80^{\circ}C$ for 80 minutes. The mordant dye color strength was high in the order of Fe mordant> Cu mordant> Al mordant. The dyeability of Al and Cu mordant was high during pre-mordanting compared to Fe mordant, and the dyeability of Fe mordant was high during post-mordanting than Cu and Al mordant. The deodorant property of the dyed fabric stained with the Myrica rubra rind extract was 92.4% and that of antibacterial property was 99.9% for Staphylococcus aureus and Klebsiella pneumoniae bacteria respectively.