• Journal of Animal Science and Technology
• /
• v.52 no.5
• /
• pp.413-426
• /
• 2010

This study was conducted to investigate the effects on fermentation characteristics of rumen microorganism by different types and levels of lignosulfonate treated soybean meal (LSBM) in in vitro test and rumen simulation continuous culture (RSCC) system in dairy cows. The experiment I was control and 12 treatments (each with 3 replications) in vitro test to demonstrate composition of different types of treatments with lignosulfonate (Desulfonate, Na, Ca and solution) and levels (2, 4 and 8%) of soybean meal in the dairy cow diet. LSBM source treatments in the dairy cow diet showed pH value, $NH_3$-N concentration and total VFA concentration lower than control at all levels and incubation times (p<0.05). Dry matter digestibility of LSBM source treatments showed lower than control (p<0.05). Gas production and rumen microbial synthesis was decreased by rumen microbial fermentation for incubation times. Undegradable protein (UDP) concentration of all LSBM treatments was decreased for incubation times, and significantly higher than control (p<0.05). In the experiment II compared diets of the control, LSBM Na 2%, LSBM Sol 2%, which are high performance to undegradable protein (UDP) concentration experiment I in vitro test, and heated treatment lignosulfonate (LSBM Heat) 2% in the dairy cow diet from four station RSCC system ($4{\times}4$ Latin square). A rumen microbial fermentation characteristic was stability during 12~15 days of experimental period in all treatments. The pH value of LSBM treatments was higher than control treatment (p<0.05). The $NH_3$-N concentration, VFA concentration and rumen microbial synthesis of LSBM treatments were lower than control (p<0.05). The undegradable protein (UDP) showed LSBM Na 2% (45.28%), LSBM Sol 2% (43.52%) and LSBM Heat 2% (43.49%) higher than control (41.55%), respectively (p<0.05). Those experiments were designed to improve by-pass protein of diet and milk protein in the dairy cows. We will conduct those experiments the in vivo test by LSBM treatments in dairy cows diet.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.4
• /
• pp.303-313
• /
• 2008

This research is aimed to investigate the cultivation method of oyster mushroom[Pleurotus ostreatus (Jacq. ex Fr.) Kummer] at the non-sterilized medium with $Ca(OH)_2$ treatment. Therefore, experiments were carried out to develop non-sterilization method of medium by addition of $Ca(OH)_2$ for omission of heat sterilization progress of medium. General components, minerals and amino acid in Jiri wild type No. 1 (Pleurotus ostreatus) and production cost were analyzed. For the purpose of omission of heat sterilization progress, treatment ratio of $Ca(OH)_2$ (purity 95%) was 5%(w/w) of dry medium. Initial pH of this medium was 11 and then the pH was changed by 9 after the uniform mixing of the medium for half an hour. The various germs occurred 50% and 100% at pH 8 and pH 7 of the non-sterilized medium, respectively. Production of oyster mushroom increased by $2,030\;ton\;ha^{-1}$ when the main raw material used corn pith instead of waste cotton. The time required of mycelium culture was 30 days when hypha was cultured at the non-sterilized medium, and pinhead occurred when 2 or 3 days was passed after the time required of mycelium culture. Occurrence of pinhead was most rapid at the condition of $22{\sim}26^{\circ}C$, 65% humidity and pH $6.5{\sim}7.0$ and required of $22{\sim}28$ days at $70{\sim}80\;mm$ thickness of non-sterilized medium. Ca content in 1st harvest oyster mushroom was higher than that in 2nd harvest one, and its difference was $30.3\;mg\;kg^{-1}$. Amino acid content by stipe thickness of oyster mushroom was ranged from 411.2 to $343.9\;mg\;kg^{-1}$ both in a pileus and a stipe of 1st harvest mushroom, and from 402.4 to $498.2\;mg\;kg^{-1}$ and from 442.6 to $470.4\;mg\;kg^{-1}$ in those of 2nd harvest one, respectively. The results of the present study suggest that the non-sterilization medium by addition of $Ca(OH)_2$ is usable with the cultivation of oyster mushroom.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.2
• /
• pp.113-123
• /
• 2020

Global climatic change and increasing climatic instability threaten crop productivity. Due to climatic change, drought stress is occurring more frequently in crop fields. In this study, we investigated the effect of treatment with hydrogen peroxide (H₂O₂) before leaf development on the growth and yield of sorghum for minimizing the damage of crops to drought. To assess the effect of H₂O₂ on the growth of sorghum plant, 10 mM H₂O₂ was used to treat sorghum leaves at the 3-leaf stage during growth in field conditions. Plant height, stem diameter, leaf length, and leaf width were increased by 7.6%, 9.6%, 8.3% and 11.5%, respectively. SPAD value, chlorophyll fluorescence (Fv/Fm), photosynthetic rate, stomatal conductance, and transpiration rate were increased by 3.0%, 4.9%, 26.0%, 23.4% and 12.7%, respectively. The amount of H₂O₂ in the leaf tissue of sorghum plant treated with 10 mM H₂O₂ was 0.7% of the applied amount after 1 hour. The level increased to approximately 1.0% after 6 hours. The highest antioxidant activity measured by the Oxygen Radical Absorbance Capacity assay was 847.3 µmol·g^-1 at 6 hour after treatment. However, in the well-watered condition, the concentration of H₂O₂ in the plant treated by the foliar application of H₂O₂ was 227.8 µmol·g^-1 higher than that of the untreated control. H₂O₂ treatment improved all the yield components and yield-related factors. Panicle length, plant dry weight, panicle weight, seed weight per plant, seed weight per unit area, and thousand seed weight were increased by 8.8%, 18.0%, 24.4%, 24.7%, 29.9% and 7.1%, respectively. Proteomic analysis showed that H₂O₂ treatment in sorghum increased the tolerance to drought stress and maintained growth and yield by ameliorating oxidative stress.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.3
• /
• pp.271-282
• /
• 2020

Sewage treatment plants are social infrastructure of cities. The sewage distribution rate in Korea is reaching 94% based on the sewage statistics based in the year of 2017. In Korean sewage treatment plants, use of PAC (Poly Aluminum Chloride) accounts for 58%. It contains a large amount of impurities (heavy metal) according to the quality standards, however, there have been insufficient efforts to reinforce the standards or technically improve the quality, which resulted in secondary pollution problems from injecting excessive coagulant. Also, the increase in the use of chemicals is leading to the increases in the annual amount of sewage sludge generated in 2017 and the need to reuse sludge. As such, this study aims to verify the possibility of reusing sludge by evaluating the stability of heavy metals based on the injection of coagulant mixture during water treatment which uses the torrefield wood powder and natural materials, and evaluating the sedimentation and heating value of sewage sludge. As a result of analyzing heavy metals (Cr, Fe, Zn, Cu, Cd, As, Pb, and Ni) from the coagulant mixture and PAC (10%), Cr, Cd, Pb, Ni, and Hg were not detected. As for Zn, while its concentration notified in the quality standards for drinking water is 3 mg/L, only a small amount of 0.007 mg/L was detected in the coagulant mixture. Maximum amounts of over double amounts of Fe, Cu, and As were found with PAC (10%) compared to the coagulant mixture. Also, an analysis of sludge sedimentation found that the coagulant mixture showed a better performance of up to double the speed of the conventional coagulant, PAC (10%). The dry-basis lower heating value of sewage sludge produced by injecting the coagulant mixture was 3,378 kcal/kg, while that of sewage sludge generated due to PAC (10%) was 3,171 kcal/kg; although both coagulants met the requirements to be used as auxiliary fuel at thermal power plants, the coagulant mixture developed in this study could secure heating values 200 kal/kg higher than the counterpart. Therefore, utilization of the coagulant mixture for water treatment rather than PAC (10%) is expected to be more environmentally stable and effective, as it helps generating sludge with better stability against heavy metals, having a faster sludge sedimentation, and higher heating value.

• Journal of the Korea Concrete Institute
• /
• v.25 no.4
• /
• pp.457-465
• /
• 2013

This study discussed the influence of mixtures and curing conditions on the development of strength and microstructure of RPC using ternary pozzolanic materials. Through pilot experiment, various RPC was manufactured by adding single or mixed ternary pozzolanic materials such as silica fume, blast furnace slag and fly ash by mass of cement, up to 0~65%, and cured by using 4 types of method which are water and air-dried curing at $20^{\circ}C$, steam and hot-water curing at $90^{\circ}C$. The results show that the use of ternary pozzolanic materials and a suitable curing method are an effective method for improving development of strength and microstructure of RPC. The unit volume of cement was greatly reduced in RPC with ternary pozzolanic materials and unlike hydration reaction in cement, the pozzolanic reaction noticeably contributes to a reduction in hydration heat and dry shrinkage. A considerable improvement was found in the flexural strength of RPC using ternary pozzolanic materials, and then the utilization of a structural member subjected to bending was expected. The X-ray diffractometer (XRD) analysis and Scanning Electronic Microscope (SEM) revealed that the microstructure of RPC was denser by using the ternary pozzolanic materials than the original RPC containing silica fume only.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.6
• /
• pp.802-806
• /
• 2005

The objective of this study was to determine the effects of processing method and rapeseed variety on ruminal and intestinal protein digestibility of rapeseed meal in steers. Intestinal amino acid digestibility was assessed with an in situ ruminal incubation and precision-fed rooster bioassay. In this experiment one traditional rapeseed meal sample (sample A, prepress extraction) and three double low rapeseed meal samples (sample B, prepress extraction, sample C, screw press and sample D, low temperature press) were placed in polyester bags(8 cm${\times}$12 cm) and suspended in the ventral rumen of steers for 16 h. The residues of in situ incubations were intubated to roosters. Total excreta were collected for 48 h after incubation and then desiccated and amino acid concentrations were determined. Results showed that in ruminal incubation the degradation rate of amino acid and crude protein was higher for traditional rapeseed meal sample A than for double low rapeseed meal sample B, but was much lower than for double low sample C and D. In the group of double low rapeseed meal samples, sample D processed by low temperature press had the highest degradation rate of amino acids in the rumen. For all amino acids, the digestibility of the residual protein as measured by the precision-fed rooster bioassay tended to be lower for sample B than for sample A, which had the same processing method with sample B, and in the group of double low rapeseed meals, sample B had similar digestibility of amino acid in residual protein to sample D and higher than that of sample C. However, although the total amino acid availability involving the digestibility of amino acids in the rumen and rooster bioassay of double low rapeseed meal sample D (low temperature press) was higher than those of the other three samples by 7 to 9 percent, there were no significant differences. Results indicated that processing method markedly affected ruminal and post ruminal amino acid digestibility of rapeseed meal when the temperature exceeded 110$^{\circ}C$. Rapeseed meal that had a high content of fiber was not suitable for dry heat treatment at higher temperatures or the amino acids digestibility in rumen and total availability of amino acids could be reduced. Results also suggested the variety of rapeseed meal had no significant effect on the digestibility and availability of amino acids.

• Korean Journal of Agricultural Science
• /
• v.40 no.4
• /
• pp.333-338
• /
• 2013

Sources of energy and rumen undegradable protein (RUP) have been used to meet nutrient requirements for high producing dairy cows. However studies for manipulation the levels of energy and RUP in diets have been mainly achieved using dairy cows at early-lactation period. The objective of this study thus, was to investigate the effects of different energy and rumen undegradable protein (RUP) levels on dry matter intake and milk yield in Holstein cows at mid-lactation period. Basal diet was prepared as TMR to meet nutrient requirements for dairy cows at mid-lactation according to NRC recommendation. Cows of control group (Con) were fed only basal diets while ground corn (0.5 kg/d), heat-treated soybean meal (0.5 kg/d), and their mixture (0.25 kg of each supplements/d) were added to diets for cows of treatment groups (T1, T2, and T3 respectively) to modulate the level of energy and RUP contents in diets. Addition of energy or RUP source in basal TMR did not affect in total DMI while TMR intake tended to be higher in Con compared to T3. Cows fed T3 diets tended to show increased milk yield and MUN content than those of Con. Cows for T2 as well as T3 had lower ADG (P<0.05) compared with those of Con. We concluded that the addition of RUP source in diets for dairy cows on mid-lactation period might cause the decrement of DMI and ADG.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.55-55
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe?rature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.56-63
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe\ulcornerrature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.4
• /
• pp.763-770
• /
• 1997

The air abrasive technique is a non-mechanical method by which teeth are treated before restoration and stains and calculi are removed from tooth surfaces using the kinetic energy of small particles. The air abrasive technique in dentistry was first introduced in the 1950's with as instrument called 'Airdent'. But, as the main restorative materials of the period were amalgam and gold, and the instrument's inability to control the flow of particles caused the particles to be spread throughout the clinics, widespread use was not possible. In the 1990's, as these techincal problems were solved and more interest in new restorative materials rose in an effort to preserve sound tooth structure, new developements took place in instruments related to the air abrasive technique. The air abrasive technique produces less pressure, vibration and heat that might cause patient discomfort and facilitates the preservation of sound tooth structure. It also reduces the need for anesthesia and is less harmful to the pulp. Other advantages include increase in dentin bonding strength of composite resin, lower possibility of saliva contamination and maintenance of a dry field. But there is not direct contact between the nozzle and the tooth, the operator cannot use his or her tactile sense and must rely solely upon visual input. Other disadvantages are: the tooth preparation depends on the operator's ability; alpha-alumina particles, after bouncing off the tooth surface, cause damage to dental mirrors; the equipment is expensive and takes up a certain amount of space in the clinic. The author conducted case report using the air abrasive technique on patient visiting the Department of Pediatric Dentistry at Seoul National University Dental Hospital and arrived at the following conclusions. 1. The tooth preparation capability of different air abrasive devices varied widely among manufacturers. 2. It was more effective in treating early caries lesions and stains compared to lesions where caries had already progressed to produce soft dentin. 3. The cold stream and noise caused by the evacuation system was a major cause of discomfort to pediatric patients. 4. As there is no direct contact with tooth surface when using the air abrasive technique for tooth preparation, considerable experience and skill is required for proper tooth preparation.