• 한국ITS학회 논문지
• /
• 제20권6호
• /
• pp.147-161
• /
• 2021

화물차 군집주행 차량과 일반차량이 혼재된 상황은 불안정한 교통흐름을 유발하여 소통뿐만 아니라, 안전성 측면에서 부정적인 영향을 미칠 가능성이 높다. 따라서 본 연구에서는 화물차 군집주행 기술 상용화시, 그 주변을 주행하는 운전자의 심리상태와 주행안전성에 대해 알아보고자 하였다. 이를 위해 도로주행 시뮬레이터를 활용하여 군집주행 대열로 끼어드는 상황과 군집주행대열 내에서 주행하는 상황으로 실험환경을 구성하였으며, 모의주행 실험을 통해 운전자의 심리상태와 주행안전성에 대해 정성적·정량적으로 분석하고자 하였다. 그 결과, 운전수행능력이 상대적으로 저하되는 운전자 그룹의 경우, 군집내 끼어들기 또는 군집내 주행에서 위험한 상황을 야기했음에도 불구하고, 스스로 안전하게 주행했다고 판단한 경우가 많았다. 특히, 차량간격이 좁을수록 오인지 비율이 크게 증대하는 것으로 나타났다. 본 연구 결과는 연결로 구간 등 화물차의 군집주행 간격을 일시적으로 넓혀야하는 경우 최적간격을 도출하거나, 군집주행/일반차량 분리방안 등 비자율차량 운전자를 위한 교통관리 전략을 수립하는데 활용할 수 있을 것으로 기대된다.

• 한국안전학회지
• /
• 제32권3호
• /
• pp.151-159
• /
• 2017

This study deals with characteristics and risk of a PM based on user survey result, road driving test and data analysis of PM accident. Text mining method is applied to extract PM accident data from Big Data, which are claim data of private insurance company. Road driving test and survey on safety, convenience, noise, overtake ability, steering ability, and climbing ability of PM are performed to evaluate user's safety and convenience considering domestic road condition. As the result of claim data analysis, annual average increase rate of PM accident is 47.4% and average compensation of personal mobility is higher than that of bicycle by maximum 1.5 times. 79.8% of PM accident is self-caused accident due to unskilled driving and age-specific diagnosis rate of driver over 60 is higher than that of under 60. Diagnosis rate of over 60 at lower limb, foot, rib and spine is especially higher than that of under 60. As the result of road driving test and user survey, satisfaction level on safety and convenience of PM is evaluated as close to that of bicycle and satisfaction level of PM is increased after boarding. Overtake ability, steering ability, and climbing ability of PM are evaluated as same or better than that of bicycle but warning equipment to pedestrian or bike such as horn is required because noise level of PM during driving is too low. Finally, user survey result shows that bicycle road is suitable for PM and safety standard, advance-education and insurance are required for PM. It is suggested that drivers' license for PM can be replaced by advance-education. Results of this study can be used to prepare safety measures and legal basis for PM operation.

• 한국자동차공학회논문집
• /
• 제24권6호
• /
• pp.668-676
• /
• 2016

The accelerated convergence of automobiles and ICT has led to an increase in in-vehicle electronic devices designed to enhance the safety and convenience of drivers. Consequently, the information presentation on in-vehicle display systems for drivers and passengers need to be taken into account in order to guarantee driving stability while satisfying the needs of UX-based design users. This study compared and evaluated requirements for information items shown on in-vehicle displays regarding driving safety and convenience by groups according to driving career. A total of 38 information items related to safety and convenience that can be displayed while driving and pulling over were collected. Their level of necessity was tested and evaluated by 234 drivers. Using the results, we conducted a comparative analysis on the requirements for information presentation on in-vehicle display systems by groups according to driving career.

• 자동차안전학회지
• /
• 제15권3호
• /
• pp.34-42
• /
• 2023

Simulation-based virtual testing is known to be a major requirement for verifying the safety of autonomous driving functions. However, in the simulation environment, there is a difficulty in that all driving environments related to the autonomous driving system must be realistically modeled. In particular, C-ITS (Cooperative-Intelligent Transport Systems) is essential for urban autonomous driving of Lv.4, but the approach to modeling for C-ITS service in the MILS (Model in the Loop Simulation) environment is not yet clear. Therefore, this paper aims to deal with V2X (Vehicle to Everything) modeling methods to effectively apply C-ITS-based autonomous cooperative driving services in the MILS environment. First, major C-ITS services and use cases for autonomous cooperative driving are analyzed, and a modeling method of V2X signals for C-ITS service simulation is proposed. Based on the modeled V2X messages, the validity of the proposed approach is reviewed through simulations on the C-ITS service use case.

• 한국안전학회지
• /
• 제18권1호
• /
• pp.81-88
• /
• 2003

Recently, pile foundations were constructed in rough or soft ground than ground of well condition thus it is important that prediction of ultimate bearing capacity and calculation of proper safety factor applied pile foundation design. This study were performed to dynamic loading tests for the thirty two piles at four different construction sites and selected pile at three site were performed to static loading tests and then compare with measured value and value of static and dynamic loading tests. The load-settlement curve form the dynamic loading tests by CAPWAP was very similar to the results obtained from the static load tests. Based on dynamic and static loading tests, the reliability of pile-driving formula were analyzed and then suggested with proper safety factor for prediction of allowable bearing capacity in this paper.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2005년도 추계학술대회 및 정기총회
• /
• pp.138-143
• /
• 2005

In order to reduce traffic accident, the interaction between drivers and roads should be studied in drivers' behaviour standpoints, and then this must be applied to the establishment of the road design standard. The K-ROADS(KICT-Road Analysis Driving Simulator) was developed to analyze and evaluate the road safety at the project HuRoSAS(Human & Road Safety Analysis System), since 2003. This has two distinct functions. One is the visual system which has 360 degree F.O.V. to reduce a dead angle on black spots as at-grade intersection. The other is the motion system which reproduce high frequency vibration made in irregular road surface and vehicle's motion. The K-ROADS has been used the study on the effect of alternatives of speed hump, and the study on the interior wall design of long tunnel to safety standpoints.

• 자동차안전학회지
• /
• 제13권4호
• /
• pp.99-105
• /
• 2021

Vehicle occupant postures are anticipated to vary more widely during automated driving and to become more significant in terms of the autonomous vehicle safety. Experimental and computational approaches are needed to investigate and evaluate occupant behaviors during automated driving in general. However the validity and effect of such occupant postures are unknown, thus it is necessary to examine occupant behaviors and injury countermeasures for various occupant postures. This study was focused on the development and evaluation of restraint system model for occupant behavior examinations in the first step according to autonomous vehicle occupant safety. The finite element models of dummy and restraint system were set up and simulation results showed overall model performance and safety tolerances of different reclined occupant postures during frontal impact loading.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2011년도 춘계학술대회
• /
• pp.635-643
• /
• 2011

The purpose of this study was to examine the effects of goal-setting on Eco-driving behaviors. An additional purpose was to examine whether setting goals on target behaviors has spread effects on non-target Eco-driving behaviors. Three office workers who drive regularly participated in this study. An AB multiple baseline design was adopted. After baseline (A), participants set goals on two or three target behaviors(e.g., over speeding, put the gears in neutral, extreme acceleration) (B). Results showed that goal-setting was effective in increasing the targeted Eco-driving behaviors. In Addition, most of the non-target Eco-driving behaviors(e.g., extreme break, extreme acceleration) increased.

• 한국안전학회지
• /
• 제26권6호
• /
• pp.124-129
• /
• 2011

The purpose of this study was to examine the effects of goal-setting on Eco-driving behaviors. An additional purpose was to examine whether setting goals on target behaviors had spread effects on non-target eco-driving behaviors. Three office workers who drive regularly participated in this study. An AB multiple baseline design was adopted. After baseline (A), participants set goals on two or three target behaviors(e.g., over speeding, put the gears in neutral, extreme acceleration) (B). Results showed that goal-setting was effective in increasing the targeted eco-driving behaviors. In addition, most of the non-target eco-driving behaviors(e.g., extreme break, extreme acceleration) increased.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.211-218
• /
• 2012

Two experiment are planed to identify driver's safe driving behaviour by curve radius, road surface condition in curve section. At four-lane and two-lane road, conducted experiments are check on driver's feeling of safety that 30 subjects do not feel discomfort. And using the data from these experiments, this study compare physical speed (not slipping, fall our of the road) with safety driving speed(drivers felt a comfortable and safe speed) each curve radius and fiver road surface condition(drying, wet, rain, snow and ice). As a result, safe driving behaviour factors that are derived to curve radius of 100m units, five road surface conditions enable to represent quantitative analysis of driver's discomfort. This study will develop road design method and evaluation reflected ergonomic aspects.